advidia M-49-FW User manual

4MP Network Cameras
User Manual
M-49-FW
M-400-P

2
https://i-pro.com/global/en/surveillance/advidia
Table of Contents
Disclaimer........................................................................................................................................................5
Environmental Protection................................................................................................................................5
Symbols ...........................................................................................................................................................5
Network Connection........................................................................................................................................6
Login................................................................................................................................................................6
Preparation......................................................................................................................................................6
Logging In to the Web Interface......................................................................................................................... 7
Introduction to the Web Interface...................................................................................................................... 9
Initial Configuration ...........................................................................................................................................9
Configuring Parameters .................................................................................................................................10
Local Parameter ............................................................................................................................................... 10
Network Configuration..................................................................................................................................... 11
Ethernet .......................................................................................................................................................11
Static Address ..........................................................................................................................................12
PPPoE.......................................................................................................................................................12
DHCP........................................................................................................................................................13
IPv6..........................................................................................................................................................14
Port...................................................................................................................................................................14
FTP....................................................................................................................................................................14
General.........................................................................................................................................................14
SMART (Applicable in M-400-P only)...........................................................................................................15
E-MAIL .............................................................................................................................................................. 16
Port Mapping ................................................................................................................................................... 17
DNS...................................................................................................................................................................17
DDNS ................................................................................................................................................................ 17
SNMP................................................................................................................................................................ 18
802.1x............................................................................................................................................................... 18
QoS ................................................................................................................................................................... 19
Adaptive Streams ............................................................................................................................................. 20
Image Adjustment............................................................................................................................................ 20
Setting scene................................................................................................................................................20
Image Enhancement ....................................................................................................................................22
Exposure ......................................................................................................................................................24
Smart Illumination .......................................................................................................................................27
Focus (Applicable in M-400-P only) .............................................................................................................28
White balance..............................................................................................................................................29
Advanced .....................................................................................................................................................30
Lighting type ................................................................................................................................................30

3
https://i-pro.com/global/en/surveillance/advidia
OSD Setting....................................................................................................................................................... 31
Privacy Mask .................................................................................................................................................... 32
Audio and Video Configuration ........................................................................................................................33
Video Configuration.....................................................................................................................................33
Audio Configuration.....................................................................................................................................35
Snapshot ......................................................................................................................................................36
ROI ...............................................................................................................................................................37
Media Stream configuration........................................................................................................................38
Media Stream ..........................................................................................................................................38
RTSP Multicast Address ...........................................................................................................................39
Intelligent Alarm Configuration........................................................................................................................39
Smart............................................................................................................................................................40
Cross Line Detection................................................................................................................................40
Enter Area................................................................................................................................................41
Leave Area ...............................................................................................................................................42
Intrusion Detection..................................................................................................................................43
Face .........................................................................................................................................................44
People Counting ......................................................................................................................................46
Auto Tracking...........................................................................................................................................47
Advanced Settings (Applicable in M-400-P only).....................................................................................47
Photo parameters ...............................................................................................................................47
Detection Parameter...........................................................................................................................48
Configuring Motion Detection Alarm ............................................................................................................... 48
Area Detection.............................................................................................................................................48
Grid Detection..............................................................................................................................................50
Configuring tampering alarm.......................................................................................................................50
Configuring Audio Detection Alarm .............................................................................................................51
Configuring Alarm Input (Applicable in M-400-P only)................................................................................53
Configuring Alarm Output (Applicable in M-400-P only).............................................................................53
Storage ............................................................................................................................................................. 54
Setting Edge Storage....................................................................................................................................54
Manual storage........................................................................................................................................55
Planned Storage ......................................................................................................................................56
Setting Cache Post Recording ......................................................................................................................56
Disable edge storage ...............................................................................................................................57
Security............................................................................................................................................................. 57
User Management .......................................................................................................................................57
Setting Secure Data Transmission................................................................................................................58
Authentication .............................................................................................................................................58
Hide vendor information .............................................................................................................................59
ARP Protection.............................................................................................................................................59
IP Address Filtering ......................................................................................................................................59
Access Policy ................................................................................................................................................60
Watermark...................................................................................................................................................60
System .............................................................................................................................................................. 61
Time .............................................................................................................................................................61
Synchronizing with the NTP Server .........................................................................................................61
Setting the DST ........................................................................................................................................61
Server (Applicable in M-400-P only) ............................................................................................................62

4
https://i-pro.com/global/en/surveillance/advidia
Intelligent server......................................................................................................................................62
Serial Port Mode Configuration (Applicable in M-400-P only).....................................................................63
PTZ control...............................................................................................................................................63
Transparent Channel ...............................................................................................................................64
OSD..........................................................................................................................................................65
ONVIF Transparent Channel....................................................................................................................66
Maintenance................................................................................................................................................66
Upgrading the system..............................................................................................................................66
Restarting the system..............................................................................................................................67
Importing and Exporting System Configuration File................................................................................67
Collecting Diagnosis Information.............................................................................................................68
Focus Configuration (only applicable for M-400-P).................................................................................68
Device Mounting height (only applicable for M-400-P) ..........................................................................68
Viewing Device Status....................................................................................................................................69
Photo Storage Status .....................................................................................................................................69
Live view........................................................................................................................................................70
Live View Toolbar.........................................................................................................................................71
Viewing Certain Area of images...................................................................................................................72
Using Digital Zoom...................................................................................................................................72
Using Area Focus (Applicable in M-400-P only).......................................................................................73
Using 3D Positioning (Applicable in M-400-P only) .................................................................................73
Face Snapshot (Applicable in M-400-P only)...........................................................................................74
Deep Perimeter Snapshot (Applicable in M-400-P only).........................................................................76
Mixed-Traffic Detection Snapshot (Applicable in M-400-P only) ............................................................77
Video Playback and Download with Edge Storage .........................................................................................78
Video Playback.............................................................................................................................................78
Download.....................................................................................................................................................78
PTZ Control....................................................................................................................................................78
PTZ Control Toolbar .....................................................................................................................................79
Setting Presets .............................................................................................................................................80
Add a preset ............................................................................................................................................80
Go to a preset..........................................................................................................................................80
Delete a preset ........................................................................................................................................81
Setting Patrol ...............................................................................................................................................81
Add a patrol route ...................................................................................................................................82
Record a patrol route ..............................................................................................................................82
Make a patrol plan...................................................................................................................................83
Start a patrol route..................................................................................................................................84
Edit a patrol route ...................................................................................................................................84
Delete a patrol route ...............................................................................................................................85
PTZ.................................................................................................................................................................85
Setting Home Position .................................................................................................................................85
Remote Control PTZ.....................................................................................................................................85
PTZ Limit.......................................................................................................................................................86
Resume Patrol..............................................................................................................................................87

5
https://i-pro.com/global/en/surveillance/advidia
Appendix A Glossary......................................................................................................................................88
Appendix B FAQ.............................................................................................................................................89
Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate
to contact the dealer.
Disclaimer
To the maximum extent permitted by applicable law, the product described, with its hardware,
software, firmware, and documents, is provided on an “as is” basis.
Best effort has been made to verify the integrity and correctness of the contents in this manual, but
no statement, information, or recommendation in this manual shall constitute formal guarantee of
any kind, expressed or implied. We shall not be held responsible for any technical or typographical
errors in this manual. The contents of this manual are subject to change without prior notice. Update
will be added to the new version of this manual.
Use of this manual and the subsequent result shall be entirely on the user’s own responsibility. In no
event shall we be reliable to you for any special, consequential, incidental, or indirect damages,
including, among others, damages for loss of business profits, business interruption, or loss of data or
documentation in connection with the use of this product.
Video and audio surveillance can be regulated by laws that vary from country to country. Check the
law in your local region before using this product for surveillance purposes. We shall not be held
responsible for any consequences resulting from illegal operations of the device.
The illustrations in this manual are for reference only and may vary depending on the version or model.
The screenshots in this manual may have been customized to meet specific requirements and user
preferences. As a result, some of the examples and functions featured may differ from those displayed
on your monitor.
This manual is a guide for multiple product models and so it is not intended for any specific product.
Due to uncertainties such as physical environment, discrepancy may exist between the actual values
and reference values provided in this manual. The ultimate right to interpretation resides in our
company.
Environmental Protection
This product has been designed to comply with the requirements on environmental protection. For
the proper storage, use and disposal of this product, national laws and regulations must be observed.
Symbols
The symbols in the following table may be found in this manual. Carefully follow the instructions
indicated by the symbols to avoid hazardous situations and use the product properly.
CAUTION!
The default password is intended for your first login. For security, please set a strong password
after your first login. A strong password shall include at least nine characters comprising digits,
letters, and special characters.

6
https://i-pro.com/global/en/surveillance/advidia
Network Connection
Before accessing a network camera (also known as IP Camera or IPC) from a PC, you need to connect
the network camera to the PC directly with a network cable or via a switch or router.
Use a Shielded Twisted Pair (STP) cable to connect the network interfaces of the network camera and
the PC.
Use Shielded Twisted Pair (STP) cables to connect the network interfaces of the camera and the switch
or router.
Login
Preparation
After you have completed the installation in accordance with the quick guide, connect the camera to
power to start it. After the camera is started, you can access the camera from a PC client installed with
a web browser or the client software Advidia Guard. Internet Explorer (IE) is a recommended web
browser. For more information about Advidia Guard, refer to the Advidia Guard User Manual.
The following takes IE on a Microsoft Windows7 operating system as an example.
1. Check before login
The camera is operating correctly.
The network connection between the PC and the camera is normal.
The PC is installed with Internet Explorer 10.0 or higher.
Symbol
Description
WARNING!
Contains important safety instructions and indicates situations that could cause
bodily injury.
CAUTION!
Means reader be careful and improper operations may cause damage or
malfunction to product.
NOTE!
Means useful or supplemental information about the use of product.
Network cable
IPC PC
IPC PC
Switch or Router
Network cable Network cable

7
https://i-pro.com/global/en/surveillance/advidia
(Optional) The resolution is set to 1440 x 900.
2. Add the IP address as a trusted site
NOTE!
The IP address 192.168.1.13in this example is the default IP address. Please replace it with the actual
address of your camera if it has been changed.
3. (Optional) Modify user access control settings
Before you access the camera, follow the steps to set User Account Control Settings to Never notify.
Logging In to the Web Interface
The default static IP address of the camera is 192.168.1.13, and the default subnet mask is
255.255.255.0.
1
2
1
2
3
4

8
https://i-pro.com/global/en/surveillance/advidia
DHCP is turned on by default. If a DHCP server is used in the network, the IP address of your camera
may be assigned dynamically, and you need to use the correct IP address to log in. Use the Advidia
Guard client to view the dynamic IP address of your camera.
The following takes IE as an example to describe the login procedure.
1. Browse to the login page by entering the correct IP address of your camera in the address
bar.
2. If you log in for the first time, follow system prompts and install the ActiveX. You need to
close your browser to complete the installation.
NOTE!
To manually load the ActiveX, type http://IP address/ActiveX/Setup.exe in the address bar and press Enter.
The default password is intended for your first login. For security, please set a strong password after your first
login. A strong password shall include at least nine characters comprising digits, letters, and special characters.
The camera protects itself from illegal access by limiting the number of failed login attempts. If login fails six
times consecutively, the camera locks automatically for ten minutes.
3. Privacy policy is displayed on the screen when the user logs in for the first time. After
reading the privacy policy, you need to check in the “I have read and agree to the above
policy” box, then click the 'OK' button to proceed to the next step.
4. Enter the username and password, and then click Login. For the first login, use the default
username “admin” and password “123456”.
If you log in with Save Password selected, you do not need to enter the password each time when you
log in. To ensure security, you are not advised to select Save Password.
To clear the Username and Password text boxes and the Save Password checkbox, click Reset.
INSERT ADVIDIA PRIVACY POLICY
SCREENSHOT
(Will be provided by Airi san)

9
https://i-pro.com/global/en/surveillance/advidia
Introduction to the Web Interface
By default, the live view window is displayed when you are logged in to the Web interface. The
following shows an example.
1 Menu
2 PTZ control area (Available in PTZ dome camera and PTZ camera)
3 Live view Window
4 Live view Toolbar
Initial Configuration
After you log in to the device, please perform the following initial configuration.
Item
Description
Ethernet.
Reconfigure the device IP and network parameters based
on the actual networking.
Log out and log in again to the Web using
the new IP address.
-
Set the system time.
Set the system time based on the actual situation.
(Optional) Set the management server.
Set the management server based on the actual
networking.
(Optional) Set the server for storing
photos.
Set the server for storing photos based on the actual
networking.
Set OSD.
Set the information displayed on the screen as needed, for
example, time.
(Optional) Manage users.
Change the default password and add common users as
needed.
1
2
3
4

10
https://i-pro.com/global/en/surveillance/advidia
You can watch the live video after finishing the initial configuration. Please configure other parameters
as needed.
NOTE!
The displayed live view interface, parameters displayed, and value ranges may vary with models. Please see the
actual Web interface for details.
The parameters that are greyed out cannot be modified. For the actual settings, see the Web interface.
It is recommended that you change the password when you are logged in the first time. For details about how
to change a password, see Security.
Configuring Parameters
Local Parameter
Set local parameters for your PC.
NOTE!
The local parameters may vary with models. Please see the actual Web interface for details.
1. Select Setup>Common>Local Parameters
Fig. 1 for M-49-FW
Fig 2 for M-400-P
2. Modify the settings as required. The following table describes some major parameters.

11
https://i-pro.com/global/en/surveillance/advidia
Parameter
Description
Smart
Display Human
snapshot
When enabled, the camera will display an on-screen mark on the
target (e.g., face when face detection is enabled) and track it.
Intelligent Mark
This function should be used with “Cross Line Detection、エラー! 参
照元が見つかりません。、エラー! 参照元が見つかりません。、
エラー! 参照元が見つかりません。、エラー! 参照元が見つかり
ません。”
Display Attributes
When enabled, the attributes collected will be displayed in live view
page. This function should be used with Intelligent > Smart > Attribute
Collection.
Video
Display Mode
Balance: Recommended if the network is in good condition.
Fluent: Recommended if you want short time lag for live video.
Min. delay: Recommended if you want the minimum time lag for live
video.
Protocol
Set the protocol used to transmit media streams to be decoded by the
PC.
Record and
Snapshot
Recording
Subsection By Time: Duration of recorded video for each recording file
on the computer. For example, 2 minutes.
Subsection By Size: Size of each recording file stored on the computer.
For example, 5M.
Record Overwrite
Overwrite: When the assigned storage space on the computer is used
up, the camera deletes the existing recording files to make room for
the new recording file.
Full Stop: When the assigned storage space on the computer is full,
recording stops automatically.
Files Folder
The save path of snapshots and recordings. The max. path length is
260 bytes. If the limit is exceeded, recording or snapshot during live
view will fail, and messages will appear on the screen.
3. Click Save
Network Configuration
Ethernet
Modify communication settings such as the IP address for the camera so that the camera can
communicate with other devices.

12
https://i-pro.com/global/en/surveillance/advidia
NOTE!
After you have changed the IP address, you need to use the new IP address to log in.
The configurations of DNS (Domain Name System) server are applicable when the device is accessed by domain
name.
Static Address
1. Click Setup>Network>Network.
2. Select Static from the Obtain IP Address drop-down list.
3. Enter the IP address, subnet mask, and default gateway address. Make sure
that the IP address of the camera is unique in the network.
4. Click Save.
PPPoE
NOTE!
This function is not supported by some models. Please see the actual model for details.
If the camera is connected to the network through Point to Point over Ethernet (PPPoE), you need to
select PPPoE as the IP obtainment mode.

13
https://i-pro.com/global/en/surveillance/advidia
5. Click Setup>Network>Network.
6. Select PPPoE from the Obtain IP Address drop-down list.
7. Enter the username and password provided by your internet Service Provider
(ISP).
8. Click Save.
DHCP
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the camera is delivered.
If a DHCP server is deployed in the network, the camera can automatically obtain an IP address from
the DHCP server.
To manually configure DHCP, follow the steps below:
1. Click Setup>Network>Network

14
https://i-pro.com/global/en/surveillance/advidia
2. Select DHCP from the Obtain IP ADDRESS drop-down list
3. Click Save
IPv6
1. By default, the IPv6 mode is set to Manual.
2. Enter the IPv6 address, set the prefix length and default gateway. The IP address must be
unique on the network.
3. Click Save.
Port
NOTE!
This function is not supported by some models. Please see the actual model for details.
1. Click Setup>Network>Port.
2. Configure relevant port numbers.
3. Click Save.
FTP
All snapshots (except face detection) are saved through the general FTP service. After the
configuration of FTP, you will be able to upload snapshots from network cameras to the specified FTP
server.
General
1. Click Setup>Storage>FTP. Go to General tab.

15
https://i-pro.com/global/en/surveillance/advidia
2. Set the IP address and port for the FTP server, username and password used
to upload images to the FTP server, select Upload Images, Overwrite Storage
and set Overwrite At (threshold for overwriting images). Some camera
models support FTP test. You may test FTP after completing FTP settings
correctly.
3. Set the path for saving snapshots on the FTP server and the file name format.
For example, set path as Preset No.\\IP Address\\Date\\Hour(s), and set file
name as Preset No.-PTZ Zoom-PTZ Latitude-PTZ Longitude.jpg.
4. Click Save.
SMART (Applicable in M-400-P only)
This function is used to store snapshots taken for smart functions such as face recognition. To use
smart FTP, click Setup > System > Server > Intelligent Server and set Platform Communication Type to
FTP.
1. Click Setup>Storage>FTP. Go to Smart tab.

16
https://i-pro.com/global/en/surveillance/advidia
2. Set the IP address and port of the FTP server, username and password used to upload
images to the FTP server.
3. Set the path for saving snapshots on the FTP server and the file name format. For
example, set path as Preset No.\\IP Address\\Date,and set file name as Preset No.-
PTZ Latitude-PTZ Longitude-PTZ Zoom.jpg.
4. Click Save.
E-MAIL
After the configuration of E-mail, when alarms are triggered, you will be able to send messages to the
specified E-mail address.
1. Click Setup>Network>E-mail.
2. Configure relevant parameters of the sender and the recipient. Some camera models
support Email test. You may test email after setting the recipient address. The
following table describes some major parameters.
Parameter
Description
TLS/SSL
When enabled, the e-mail will be encrypted using TLS (Transport Layer Security)
or Secure Socket Layer (SSL) to protect privacy.
First it tries to send through an SSL connection. If the SMTP server supports SSL,
the e-mail will be sent through the SSL connection; otherwise, it tries to send
using STARTTLS.
Attach Image
When enabled, the e-mail will contain 3 instant snapshots as attachment
according to the Capture Interval.
Username/Password
Username and password of the registration email address. The password allows
the following special characters \ / : * ? ’ ” <> | % &
3. Click Save.

17
https://i-pro.com/global/en/surveillance/advidia
Port Mapping
1. Click Setup>Network>Port. Go to Port Mapping tab.
2. Enable Port Mapping and select mapping type. If Manual is selected, then external ports
must be configured (external IP isobtained automatically by the camera). If the configured
port is occupied, then the Status will show Inactive.
3. Click Save.
DNS
1. Click Setup>Network>DNS
2. Set DNS server addresses.
3. Click Save
DDNS
NOTE!
This function is not supported by some models. Please see the actual model for details.
1. Click Setup>Network>DDNS.

18
https://i-pro.com/global/en/surveillance/advidia
2. Enable DDNS Service
3. Select a DDNS type: DynDNS, NO-IP, or MyDDNS.
4. Complete other settings including server address, domain name, username, and password.
5. Click Save.
SNMP
SNMPv3 is recommended when a camera needs to transfer configuration with the central server. Both
the camera and the central server should support SNMPv3.
NOTE!
Two options are available: SNMPv3 (default) and SNMPv2.
If you choose SNMPv2, an onscreen message will remind you of potential risks and ask if you want to
continue.
1. Click Setup> Network > SNMP
2. Select SNMPv3 and complete settings.
3. Click Save.
On the SNMPv2 setting page, Read-Only Community Name is used for two-way authentication
between a camera and thecentral server. The default name is public, and you may change it as needed.
If you change the Read-Only Community Name, you should change it into the same one on the central
server, or the two-way authentication will not be completed.
802.1x
802.1x provides authentication to devices (e.g., cameras) trying to connect to a network. Only the
authenticated devices can connect the network. This enhances security.
1. Click Setup>Network>802.1x.

19
https://i-pro.com/global/en/surveillance/advidia
2. Select On and then complete other settings.
3. Click Save.
QoS
QoS (Quality of Service) is the ability to provide better service for specified network communication.
As a network security mechanism, QoS is used to address problems like network delay and blocking.
When the network is overloaded or congested, QoS ensures that critical services are not delayed or
discarded and that the network runs efficiently.
1. Click Setup > Network > QoS.
2. Set a priority level (0~63) for each service. At present, QoS allows you to assign different
priority to audio and video, alarm report, configuration management and FTP
transmission. The greater the value, the higher the priority. For example, if the value of
audio and video is set to 60, alarm report and configuration management is set to 0, and
FTP is set to 4, when network congestion occurs, the priority is to ensure the smooth
running of audio and video.
3. Click Save.
Note:
To use QoS, make sure that the switch support QoS mode.

20
https://i-pro.com/global/en/surveillance/advidia
Adaptive Streams
NOTE!
Adaptive Streams is not available on all models and is enabled by default on some models. Please see the actual
Web interface for details.
It’s recommended to enable Adaptive Streams in a poor network environment.
Image Adjustment
NOTE!
The image parameters displayed, and value ranges allowed may vary with camera model. For the actual
parameters and value ranges of your camera, see the Web interface. You may move the sliders to adjust
settings or enter values in the text boxes directly.
Clicking Default will restore all the default image settings.
Setting scene
Set image parameters to achieve the desired image effects based on live video in different scenes.
1. Click Setup>Image>Image.
The scene management page for some models is displayed as follows, you can select the desired scene
in the drop-down list.
The scene management page of some models is displayed as follows; you can take the following steps
to configure the scene.
1. Click Scenes.
2. Select a scene, and then set scene switching parameters. The following table
describes some major parameters.