AEMC instruments SIMPLE LOGGER L100 User manual

SIMPLE LOGGER®
DATA LOGGERS
AC Current • AC Voltage • DC Voltage
Thermistor • Thermocouple • 4 to 20mA
➤Complete line of loggers that include
AC current, AC voltage, DC voltage,
thermistor, thermocouple and
4 to 20mA
➤Low cost data loggers require
no user setup
➤Automatically adjusts both its
scale range and sample rate
➤Windows®based software that can plot,
analyze recorded data and print graphs
and data listings

2 www.aemc.com Technical Assistance [phone]
DATA LOGGING
MADE SIMPLE …
Simple Logger®
Simple Logger®is a single channel, low cost data logger that requires no
user setup. It has the ability to automatically adjust both its scale range
and its sample rate to optimize the recording session. Simple Logger®
includes a Windows®based software package that can plot and analyze
recorded data and print graphs and data listings.
Simple Logger®offers three modes of operation: LOGGING, STANDBY
and OFF. A red LED indicates the mode of operation. In the LOGGING
mode, the logger records information into memory; in the STANDBY
mode, it retains the recorded information for transfer to a computer; in the
OFF mode, the memory is cleared. However, if Simple Logger®is turned
off by mistake, the cleared data can be easily recovered.
The main advantage of the Simple Logger®is its ability to perform a wide
variety of recording tasks with high resolution and accuracy without the
need for user setup. It achieves this by means of automatic scaling and
Time Extension Recording™(TXR™) along with a flexible input design.
Simple Logger®is easy to use. It is designed to record data on-site and
download it to your computer for analysis. For the user who is monitoring
a machine load or voltage line, troubleshooting HVAC, profiling a process
loop or monitoring temperature, it’s the perfect tool to give you the
information you need, when you need it. Simply connect the Logger
to the signal to be recorded and press the button to begin recording.
When the session is complete, press the button to stop. It is that simple!
FEATURES
➤No user setup required
➤One button operation — start and
stop recordings and turn the logger
on and off
➤Log and measure Arms, Vrms,
Temperature, DC Volts, DC Amps
(model dependent)
➤Innovative Time Extension Recording™
(TXR™) technique provides continuous
recording for any length of time without
user setup
➤Auto-Sampling up to 4096/hr — provides
for maximum information
➤Auto-Scaling — provides for optimum
resolution for the recording session
➤Small size — mount it anywhere
➤Low power — records for up to
one year using a 9V Alkaline battery
➤Stores up to 73,000 readings
(model dependent)
➤Includes Windows®based graphing
and analysis software
APPLICATIONS
➤Machine load monitoring
➤Metering CT re-sizing
➤Temperature monitoring
➤HVAC troubleshooting
➤Line voltage/stray voltage monitoring
➤Computer room monitoring
➤Food storage/refrigerated freight
➤Load profiling
➤Process control monitoring
➤Railroad signal monitoring
➤Surge/Sag monitoring
➤Wave soldering
➤Flow monitoring
➤Level monitoring
➤And many more

Technical Assistance [phone] www.aemc.com 3
Plot graphs and view statistics quickly and
easily when you download data from Simple
Logger®to your computer. Scale and time
axis update automatically.
Click and drag your mouse to zoom up the
desired area of the graph for better viewing.
The Min, Max and Average statistics at the
bottom of the graph update automatically
when the graph is zoomed.
Click the Annotate button to add a title and
descriptive information to your graph. This
information can be stored and printed with
the graph.
FEATURES
➤Very easy to set up and use — no
programming required
➤Statistics appear on screen:
Max, Min, Avg, Date and Time
➤On-Line display of data logger values
➤Zoom capability with automatic
statistics update
➤User keyed text annotations
➤Automatically displays values at
the cursor position
➤Export data to spreadsheet and
database software
➤Print both graphs and tabular listings
➤Paste graphs into other applications
➤Programmable scale and units for all DC
loggers. Automatic selection for AC loggers
➤User programmable High and Low limits
(Model L215)
➤User programmable record modes —
inside or outside of limits (Model L215)
MINIMUM SYSTEM
REQUIREMENTS
➤Windows®98, Windows®2000/ME or
Windows®XP
➤8MB of RAM
➤One serial port not in use by
any other device
➤8MB hard drive space for
program and 400K max
per file stored
Plot area with value and
time data shown on the
X andY axis
Click the Annotate
button to add a title
and descriptive
information to
your graph.This
information can
be stored and
printed with a graph.
On-line display of data
Annotate
button
Annotate
button
Automatic
update of
time, date
and value
at cursor
position
Graph
statistics
Click and drag your mouse to zoom up
the desired area of the graph for better
viewing.The Min, Max and Average
statistics at the bottom of the graph update
automatically when the graph is zoomed.
Click the scale button in the file menu to
create custom scales and engineering units
for DC voltage (Models L410 and L430)
and DC current loggers (Model L320).
Simple Logger®Model 215 Software
User programmable
High and Low limits
Each captured exception is displayed at its time
of occurrence on the graph. Individual exceptions
can be zoomed up for more detailed analysis.
User selectable mode allows for data
storage inside or outside the limits
Simple Logger®Software

AC CURRENT
SIMPLE LOGGER®
Models L100 & L110
Model L100
SPECIFICATIONS
MODELS L100 L110
ELECTRICAL
Number of Channels One One
Measurement Range 0 to 10,000Arms 0 to 3000Arms
(based on probe) (based on probe)
Input 0 to 1Vrms 0 to 1Arms
Input Connection Recessed safety banana jacks on 3/4" (19mm) centers
Resolution 8 bit (Max resolution depends on probe)
Accuracy ±1% of Reading + Resolution + probe accuracy
Sample Rate 4096/hr max, decreases by 50% each time memory is full
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 readings
Output RS-232 via DB9 connector
Indicators Red LED double flashes in LOGGING,
single flashes in STANDBY, and is off in OFF mode
Controls One button used to start and stop recording sessions
and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 600V Cat. III
Double Insulation Yes Model L110 with 200A AC Current Probe Model MN213
The Simple Logger®Models L100 and L110
are single channel, low cost data loggers
that require no user setup. They have the
ability to automatically adjust both their
scale range and their sample rate to optimize
the recording session.
The AC current logger measurement range
is 0 to 1Vrms and 0 to 10,000Arms (based
on probe) for Model L100, and 0 to 1Arms
and 0 to 3000Arms (based on probe) for
Model L110.
Both models are compatible with numerous
AEMC current probes.
FEATURES
➤Supports wide range of current probes
with voltage or current outputs
➤Two input types to choose from:
Model L100
Use current probes with VAC output
0 to 1Vrms input
0 to 10,000Arms (based on probe)
Model L110
Use current probe with AAC output
0 to 1Arms input
0 to 3000Arms (based on probe)
➤True RMS measurements
➤Input via color-coded safety
banana jacks
➤Select scale via software to
match probe
➤RS-232 output
➤One button operation
➤Accuracy: ±1% of Reading + Resolution
APPLICATIONS
➤Machine load monitoring
➤Metering CT re-sizing
➤Load profiling
➤Fault finding
➤And many more
4 www.aemc.com Technical Assistance [phone]

Technical Assistance [phone] www.aemc.com 5
CLAMP-ON AC CURRENT
SIMPLE LOGGER®
Model CL600
Model CL600
The Clamp-On Simple Logger®Model
CL600 is a self-contained data logging AC
current probe. The logger requires no user
setup and has the ability to automatically
adjust its scale and sample rate to optimize
the recording. One button operation makes
the clamp-on logger extremely easy and
quick to use. The Model CL600 has true
RMS measurements with 0 to 600Arms input
and storage of over 8000 data points with
a built-in RS-232 port for downloading data.
It also provides one year operation from a
single 9V Alkaline battery. A Windows®based
software package is included which allows
plotting, statistical analysis, text annotation
and zoom capability.
FEATURES
➤0 to 600Arms
➤True RMS measurements
➤Self-contained, no exposed connections
➤Overload indication
➤RS-232 output
➤One button operation
APPLICATIONS
➤Machine load monitoring
➤HVAC troubleshooting
➤Load profiling
➤Electrical troubleshooting
➤And many more
SPECIFICATIONS
MODEL CL600
ELECTRICAL
Number of Channels One
Measurement Range 0 to 600Arms
Input Connection Split jaw internal current sensor
Resolution 8 bit (0.5A)
Accuracy 2% of Reading + Resolution (0 to 400A)
5% of Reading + Resolution (400 to 600A)
Sample Rate 4096/hr max
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 readings
Output RS-232 via DB9 connector
Indicators Red LED flashes once every two seconds in STANDBY mode,
twice every two seconds in LOGGING mode,
and if off in OFF mode
Controls One button used to start and stop recording sessions
and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 9.25 x 4 x 1.62" (235 x 102 x 41mm)
Jaw Opening 1.65" (42mm) max
Weight 1.07 lbs (484.79g)
Case Material Polycarbonate UL VO
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 600V Cat. III
Double Insulation Yes
Model CL600 recording current draw on a VSD

6 www.aemc.com Technical Assistance [phone]
Model L260 setting up to log voltage in a
distribution panel.
AC VOLTAGE
SIMPLE LOGGER®
Models L205, L230
& L260
Model L230
The Simple Logger®Models L205, L230
and L260 are single channel, low cost data
loggers that require no user setup. They
have the ability to automatically adjust both
their scale range and their sample rate to
optimize the recording session.
The Model L205 has an AC voltage
measurement range of 0 to 25Vrms (stray
voltage). The Model L230 has an AC voltage
measurement range of 0 to 300Vrms,
and the Model L260 has an AC voltage
measurement range of 0 to 600Vrms.
FEATURES
➤Three input types to choose from:
Model L205
0 to 25Vrms input (stray voltage)
Model L230
0 to 300Vrms input
Model L260
0 to 600Vrms input
➤True RMS measurements
➤Input via color-coded safety
banana jacks
➤Scale automatically selected
by software
➤RS-232 output
➤One button operation
➤Accuracy: ±1% of Reading + Resolution
APPLICATIONS
➤HVAC troubleshooting
➤Line voltage monitoring
➤Surge/Sag monitoring
➤Stray voltage monitoring
➤Dropout monitoring
➤And many more
SPECIFICATIONS
MODELS L205 L230 L260
ELECTRICAL
Number of Channels One One One
Measurement Range 0 to 25Vrms 0 to 300Vrms 0 to 600Vrms
Input 0 to 25Vrms 0 to 300Vrms 0 to 600Vrms
Input Impedance 1MΩ2MΩ2MΩ
Input Connection Recessed safety banana jacks on 3/4" (19mm) centers
Resolution 8 bit 12.5mV max 8 bit 250mV max 8 bit 500mV max
Accuracy ±1% of Reading + Resolution
Sample Rate 4096/hr max, decreases by 50% each time memory is full
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 readings
Output RS-232 via DB9 connector
Indicators Red LED double flashes in LOGGING, single flashes
in STANDBY, and is off in OFF mode
Controls One button used to start and stop recording
sessions and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 600V Cat. III
Double Insulation Yes

Technical Assistance [phone] www.aemc.com 7
AC EXCEPTION VOLTAGE
SIMPLE LOGGER®
Model L215
Model L215
SPECIFICATIONS
MODEL L215
ELECTRICAL
Number of Channels One
Measurement Range 0 to 250Vrms
Input 250V, Programmable event window
Input Connection Recessed safety banana jacks on 3/4" (19mm) centers
Resolution 10 bit, 250mV max
Accuracy ±1% of Reading + 250mV
Sample Rate 36,000/hr (10 samples per sec)
Storage Technique Exception recording in FIFO mode; 60 samples stored
when alarm is tripped. Each 60 second sample recording
is considered to be a packet. When memory is full, data
will be overwritten one packet at a time beginning with
the oldest. Recording only occurs during alarm conditions.
Data Storage 73,620 readings
Output RS-232 via DB9 connector (@ 4800 baud)
Indicators Red LED double flashes in LOGGING, single flashes
in STANDBY, and is off in OFF mode. Amber LED single
flashes for Exception and can only be reset
by stopping the recording and downloading the data.
Controls One button used to start and stop recording sessions
and to turn the data logger on and off
Power Source Powered from measured signal with 9V Alkaline battery backup
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 300V Cat. III
Double Insulation Yes
The AC Exception Voltage Simple Logger®
Model L215 is the ideal product to capture
short-term events such as sags and swells.
This logger samples the input 10 times per
second and only stores the data when an
alarm threshold is crossed, thus maximizing
its use of memory. The 73,000-point storage
capacity provides enough memory to store
more than 1000 events, each containing
60 data points. The Model L215 is powered
by the AC voltage signal it is monitoring
and incorporates a backup battery to
provide up to one year of additional
operation and data storage protection.
FEATURES
➤0 to 250Vrms measurement range
➤10 samples per second
➤Stores data when alarm level is tripped
➤True RMS measurements
➤Stores over 73,000 readings
➤10 bit resolution (250mV)
➤Detect sags and swells
➤Scale automatically selected by software
➤Software programmable High and Low
alarm levels
➤RS-232 output
➤One button operation
➤Alarm trip LED indicator
APPLICATIONS
➤Surge/Sag monitoring
➤Computer room monitoring
➤Residential monitoring
➤Machine monitoring
➤Marine power monitoring
➤And many more
Model L215 monitoring a control panel looking for
dropouts and spikes in the line voltage

8 www.aemc.com Technical Assistance [phone]
DC VOLTAGE
SIMPLE LOGGER®
Models L410 & L430
Model L430
The Simple Logger®Models L410 and L430
are single channel, low cost data loggers that
require no user setup. They have the ability to
automatically adjust both their scale range
and sample rates to optimize the recording
session. The Model L410 DC voltage logger's
measurement range is 0 to 100mVDC
and the Model L430 has a DC voltage
measurement range of 0 to 10VDC.
FEATURES
➤Two models to choose from:
Model L410
0 to 100mVDC
Model L430
0 to 10VDC
➤Input impedance: 1MΩ
➤Programmable scales via software
➤Programmable units via software
➤Inputs via color-coded safety
banana jacks
➤RS-232 output
➤One button operation
➤Accuracy: ±1% of Reading + Resolution
APPLICATIONS
➤Circuit design troubleshooting
➤Sensor monitoring
➤Battery monitoring
➤Power supply profiling
SPECIFICATIONS
MODELS L410 L430
ELECTRICAL
Number of Channels One One
Measurement Range 0 to 100mVDC 0 to 10VDC
Input Impedance 1MΩ1MΩ
Input Connection Recessed safety banana jacks on 3/4" (19mm) centers Recessed safety banana jacks on 3/4" (19mm) centers
Resolution 50µV max 5mV max
Accuracy 1% of Reading + Resolution
Sample Rate 4096/hr max
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 readings
Output RS-232 9 pin via DB9 connector
Indicators Red LED double flashes once every two seconds in STANDBY mode, twice every two seconds
in LOGGING mode, and is off in OFF mode
Controls One button used to start and stop recording sessions and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 30V Cat. III
Double Insulation Yes

Technical Assistance [phone] www.aemc.com 9
THERMISTOR
SIMPLE LOGGER®
Model L605
Model L605
The Simple Logger®Thermistor Logger
Model L605 is a single channel, low cost
data logger that requires no user setup. It
is directly compatible with industry standard
10kΩthermistor probes. The Model L605
has both an internal and external thermistor
with a measurement range of -4° to 212°F
(-20° to 100°C).
FEATURES
➤Internal or external thermistor
➤Thermistor type 10KΩ@ 77°F (25°C)
➤Measurement Range:
(Internal)
-4° to 158°F (-20° to 70°C)
(External)
-4° to 212°F (-20° to 100°C)
➤RS-232 output
➤One button operation
➤Accuracy: ±1% of Reading + 0.25°C
APPLICATIONS
➤Ambient temperature monitoring
➤HVAC troubleshooting
➤Computer room monitoring
➤Food storage
➤Wave soldering temperature profiling
➤Process control monitoring
➤Refrigerated freight
➤And many more
SPECIFICATIONS
MODEL L605
ELECTRICAL
Number of Channels One
Measurement Range Temperature °F and °C
Input Impedance Thermistor type 10KΩ@ 77°F (25°C)
Input Connection In-line 3.5mm connector
Resolution 8 bit
Accuracy 1% of Reading ± 0.25°C
Sample Rate 4096/hr max, decreases by 50% each time memory is full
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 readings
Output RS-232 via DB9 connector
Indicators Red LED double flashes in LOGGING, single flashes in
STANDBY, and is off in OFF mode
Controls One button used to start and stop recording sessions
and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 30V Cat. III
Double Insulation Yes
Model L605 monitoring the temperature in a
communications cabinet

10 www.aemc.com Technical Assistance [phone]
THERMOCOUPLE
SIMPLE LOGGER®
Models L610, L620 & L630
Model L630
SPECIFICATIONS
MODELS L610 L620 L630
ELECTRICAL
Number of Channels One One One
Measurement Range 32° to 1382°F (0° to 750°C) -328° to 2282°F (-200° to 1250°C) -328° to 662°F (-200° to 350°C)
Input J thermocouple K thermocouple T thermocouple
Input Connection Miniature black thermocouple jacks Miniature yellow thermocouple jacks Miniature blue thermocouple jacks
Resolution 12 bit 12 bit 12 bit
Accuracy 0.5% of Reading + T/C Accuracy
Sample Rate 4096/hr max
Storage Technique Time Extension Recording™(TXR™)
Data Storage 16,384 readings
Output RS-232 via DB9 connector
Indicators Red LED flashes once every two seconds in STANDBY mode, twice every two seconds
in LOGGING mode, and is off in OFF mode
Controls One button used to start and stop recording sessions and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 30V Cat. III
Double Insulation Yes
The Simple Logger®Models L610, L620
and L630 are single channel, low cost
thermocouple data loggers that require
no user setup. They have the ability to
automatically adjust both their scale range
and their sample rate to optimize the
recording session.
FEATURES
➤Three models to choose from:
Model L610 (Type J)
32° to 1382°F (0° to 750°C)
Model L620 (Type K)
-328° to 2282°F (-200° to 1250°C)
Model L630 (Type T)
-328° to 662°F (-200° to 350°C)
➤Inputs via color-coded miniature
thermocouple jacks
➤Open thermocouple
➤RS-232 output
➤One button operation
➤Internal cold junction compensation
➤Accuracy: ±0.5% of Reading + T/CAccuracy
APPLICATIONS
➤Process control monitoring
➤Wave soldering
➤Refrigeration monitoring
➤HVAC
➤And many more

Technical Assistance [phone] www.aemc.com 11
4 to 20mA
SIMPLE LOGGER®
Model L320
Model L320
The 4 to 20mADC Simple Logger®Model
L320 is ideal for process control monitoring
and troubleshooting. The measurement
range is 0 to 25mADC. The unit is self-
contained with no exposed connections.
The logger requires no user setup and has
the ability to automatically adjust its scale
and sample rate to optimize the recording.
One button operation makes the DC current
logger extremely easy and quick to use.
FEATURES
➤Auto-Ranging
➤Programmable scales via software
➤Programmable units via software
➤RS-232 output
➤Simple one button operation
➤Standard terminal strip input
➤Self adjusting sample rate
➤Compact size fits anywhere
➤Low loop impedance
➤Accuracy: ±1% of Reading + Resolution
APPLICATIONS
➤Process control monitoring and
troubleshooting
➤Profile temperature, pressure, flow
and other parameters directly
➤General purpose DC current
monitoring
➤And many more
SPECIFICATIONS
MODEL L320
ELECTRICAL
Number of Channels One
Measurement Range 0 to 25mADC
Input Impedance 100Ω
Input Connection Two post screw terminal strip
Resolution 8 bit (12.5µA max)
Accuracy 1% of Reading + Resolution
Sample Rate 4096/hr max
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 readings
Output RS-232 9 pin via DB9 connector
Indicators Red LED double flashes once every two seconds
in STANDBY mode, twice every two seconds
in LOGGING mode, and is off in OFF mode
Controls One button used to start and stop recording sessions
and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to one year of recording @ 77°F (25°C)
MECHANICAL
Dimensions 2.88 x 2.32 x 1.62" (73 x 59 x 41mm)
Weight 5 oz (140g) including battery
Case Material Polystyrene UL VO
Mounting Base plate mounting holes or Velcro®pads
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 30V Cat. III
Double Insulation Yes
Model L320
recording pressure
on an extruder
using a pressure
transducer with a
4 to 20mA output

12 www.aemc.com Technical Assistance [phone]
MODELS AL24-2500 AL36-2500 AL24-5000 AL36-5000
ELECTRICAL
Number of Channels One One One One
Measurement Range 5 to 250Arms or 5 to 250Arms or 5 to 500Arms or 5 to 500Arms or
Internally Switch Selectable 5 to 2500Arms 5 to 2500Arms 5 to 5000Arms 5 to 5000Arms
Input Sensor 24" AmpFlex™36" AmpFlex™24" AmpFlex™36" AmpFlex™
Resolution 250A 1A max 1A max – –
500A – – 2A max 2A max
2500A 10A max 10A max – –
5000A – – 20A max 20A max
Accuracy 1% of Reading + Resolution
Storage Technique Time Extension Recording™(TXR™)
Data Storage 8192 Readings
Output RS-232 via 5 pin circular connecter
Indicators Red LED light flashes once every two seconds in LOGGING mode, and is off in OFF mode.
LED is on continuously in overload condition
Controls One button used to start and stop recording sessions and to turn the data logger on and off
Power Source 9V Alkaline battery
Battery Life Up to six months of recording @ 77°F (25°C)
MECHANICAL
Sensor Diameter 0.5" (12.5mm)
Logging Module Dimensions 4.5 x 2.5 x 1.56 " (114 x 64 x 41mm)
Weight 15.5 oz (439g) including battery
Case Material ABS UL94 VO
Mounting Velcro®pads supplied loose
ENVIRONMENTAL
Operating Temperature -4° to 158°F (-20° to 70°C)
Storage Temperature -4° to 174°F (-20° to 80°C)
Relative Humidity 5 to 95% non-condensing
SAFETY
Safety Rating EN 61010, 30V Cat. III
Double Insulation Yes
FLEXIBLE CURRENT
PROBE SIMPLE LOGGER®
Models AL24-2500,
AL36-2500, AL24-5000
& AL36-5000
Model AL36-5000
The AmpFlex™Flexible Current Probe Simple
Loggers®combine two technologies to
become the ultimate measurement recording
device. The AmpFlex™flexible current probe
is designed to take measurements where
standard clamp-ons cannot: in tight breaker
panels, around large bus bars, around cable
bundles and even wrapped around irregular
shapes. Combined with the recording
technology of the Simple Logger®it measures,
records and graphs True RMS readings. The
flexible sensor is available in 24" and 36". It
is weatherproof NEMA 4X, IP65 rated. The
flexible current probe logger is self-contained
and records for up to six months.
FEATURES
➤Four models to choose from
➤True RMS recording —
250 and 2500Arms/500 and 5000Arms
➤Self contained, no exposed connections
➤Weatherproof NEMA 4X, IP65 rated
➤Flexible sensor — fits anywhere
➤Records for up to six months
➤Scale automatically selected
in software
➤RS-232 output
APPLICATIONS
➤Load profiling
➤Machine load monitoring
➤Substation monitoring
SPECIFICATIONS

Technical Assistance [phone] www.aemc.com 13
ACCESSORIES
Current Probe and Simple Logger®Compatibility
Series Probe Ratio Measurement Range Output Signal Output Catalog Logger
Model AC DC Current Voltage Connection No. Model
MN211 1000:1 0.5 to 240A – 1mAAC/AAC –Lead 2115.73 L110
MN213 1000:1 0.5 to 240A – 1mAAC/AAC –Lead 2115.75 L110
MN251 – 0.1 to 240A – – 1mVAC/AAC Lead 2115.77 L100
MD301 – 2 to 500A – – 1mVDC/AAC Lead 1201.07 L430
MD303 1000:1 4 to 500A – 1mAAC/AAC –Lead 1201.21 L110
MD305 1000:1 1 to 600A – 1mAAC/AAC –Lead 1201.36 L110
MD314 – 4 to 500A – – 1mVAC/AAC Lead 2110.75 L100
MR410* – 1 to 400A – – 1mV/AAC Lead 1200.70 L100 (AC)
–1to 600A 1mV/ADC Lead 1200.70 L430 (DC)
–0.2 to 40A – – 10mV/AAC Lead 1200.68 L100 (AC)
0.5 to 400A 0.5 to 600A 1mV/AAC
MR411*
–0.4 to 60A 10mV/ADC Lead 1200.68 L430 (DC)
–0.5 to 600A 1mV/ADC
MR520* – 1 to 1000A – – 1mV/AAC/DC Lead 1200.71 L100 (AC)
–1to 1500A 1mV/AAC/DC L430 (DC)
–0.2 to 100A 0.4 to 150A – 10m V/AAC Lead 1200.69 L100 (AC)
0.5 to 1000A 0.5 to 1500A 1mV/AAC
MR521*
0.2 to 100A 0.4 to 1500A 10mV/ADC Lead 1200.69 L430 (DC)
0.5 to 1000A 0.5 to 1500A 1mV/ADC
SR604 1000:1 0.1 to 1000A – 1mAAC/AAC –Lead 2113.44 L110
SR652 – 0.1 to 1000A – – 1mVAC/AAC Lead 2113.46 L100
SR704 1000:1 1mA to 1000A – 1mAAC/AAC –Lead 2116.30 L110
SR752 – 0.1 to 1000A – – 1mVAC/AAC Lead 2116.32 L100
*Caution: Do not use DC loggers with AC probes or AC loggers with DC Probes
ø = 0.78"
ø = 1.18"
ø = 2.05"
Split Core AC and DC Current Probes
ø = 1.18"
ø = 1.6"

14 www.aemc.com Technical Assistance [phone]
Flexible Probes for use with
Simple Logger®Model L100
24" Flexible Probes
Catalog No. Probe Model Range Ratio
2112.20 200-24-1-1 200A 1mV/A
2112.24 300-24-1-1 300A 1mV/A
2112.34 500-24-1-1 500A 1mV/A
2112.39 1000-24-1-1 1000A 1mV/A
2112.62 6000-24-1-0.1 6000A 0.1mV/A
2112.70 10000-24-1-0.1 10,000A 0.1mV/A
2112.93 500-24-2-1 50/500A 10/1mV/A
2112.98 1000-24-2-1 100/1000A 10/1mV/A
2113.19 6000-24-2-0.1 600/6000A 1/0.1mV/A
2113.27 10000-24-2-0.1 1000/10,000A 1/0.1mV/A
2114.87 3000-24-2-0.3 300/3000A 3.3/0.3mV/A
36" Flexible Probes
Catalog No. Probe Model Range Ratio
2112.02 10000-36-2-0.1 1000/10,000A 1/0.1mV/A
2112.41 1000-36-1-1 1000A 1mV/A
2112.64 6000-36-1-0.1 6000A 0.1mV/A
2112.72 10000-36-1-0.1 10,000A 0.1mV/A
2113.00 1000-36-2-1 100/1000A 10/1mV/A
2113.21 6000-36-2-0.1 600/6000A 1/0.1mV/A
2114.88 3000-36-2-0.3 300/3000A 0.3/3.3mV/A
48" Flexible Probes
Catalog No. Probe Model Range Ratio
2112.03 10000-48-2-0.1 1000/10,000A 1/0.1mV/A
2112.42 1000-48-1-1 1000A 1mV/A
2112.65 6000-48-1-0.1 6000A 0.1mV/A
2112.73 10000-48-1-0.1 10,000A 0.1mV/A
2113.01 1000-48-2-0.1 100/1000A 10/1mV/A
2113.22 6000-48-2-0.1 600/6000A 1/0.1mV/A
60" Flexible Probes
Catalog No. Probe Model Range Ratio
2112.74 10000-60-1-0.1 10,000A 0.1mV/A
2113.29 10000-60-2-0.1 1000/10,000A 1/0.1mV/A
Voltage Leads, set of two, with clips,
5 ft, compatible with Models L205, L230,
L260, L410 and L430
Cat. #2118.51
Thermistor Probe with
4" stainless steel
sheath, 6 ft for
Model L605
Cat. #2114.20
Thermistor Probe with Epoxy bead, 6 ft
for use with L605
Cat. #2114.19
110V US Outlet Adapter
with banana jacks for
Models L230 and L260
Cat. #2118.49
Flexible Current Probe and
Simple Logger®Compatibility
Cable, 6 ft DB9 M/F Replacement
for all Models (except AL Series)
Cat. #2114.27
Cable, 6 ft DB9F/Circular Connector
(for AL series)
Cat. #2114.25
Simple Logger®Software
Upgrade for all models
available for download at
www.aemc.com
Carrying Case
Cat. #2118.09
LongLife AmpFlex™for use with
Simple Logger®Model L100
24" Flexible Probes
Catalog No. Probe Model Range Ratio
2120.66 1000-24-1-1 1000A 0.1mV/A
2120.67 1000-24-2-1 100/1000A 10mV/1mmV/A
36" Flexible Probes
Catalog No. Probe Model Range Ratio
2120.68 3000-36-1-1 3000A 0.3mV/A
2120.69 3000-36-2-1 300/3000A 0.3mV/3.3mV/A

Technical Assistance [phone] www.aemc.com 15
CONSTRUCTION
Input
Start/Stop/Record button
Mounting tab
Operation mode LED
RS-232 output
Mounting tab
L Series
CL Series
AL Series
Jaw Opening:
1.65" (42mm max)
Conductor Size:
one conductor 1.65" (42mm)
two conductors 1" (25.4mm)
Start/Stop/
Record button
Operation
mode LED
RS-232 output
Safety barrier/
anti-slip guard
Lever for
opening/
closing jaw
Start/Stop/
Record button
RS-232
output
Operation
mode LED
Flexible
sensor
input
Lead from
sensor to
module
Flexible sensor
AmpFlex™
connector/latch

Call the AEMC®Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: [phone]
Chauvin Arnoux® , Inc. d.b.a AEMC®Instruments • 200 Foxborough Blvd. • Foxborough, MA 02035 USA • [phone] • [phone] • Fax [phone]
Visit our website at www.aemc.com 950.BR-SIMPLE 03/05 Printed in the USA
INPUT CONNECTIONS
ORDERING INFORMATION CATALOG NO.
Simple Logger®Model L100 (RMS Current, 0 to 1VAC Input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.50
Simple Logger®Model AL24-2500 (RMS Current, 250/2500A, 24" AmpFlex™).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.72
Simple Logger®Model AL36-2500 (RMS Current, 250/2500A, 36" AmpFlex™).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.73
Simple Logger®Model AL24-5000 (RMS Current, 500/5000A, 24" AmpFlex™).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.74
Simple Logger®Model AL36-5000 (RMS Current, 500/5000A, 36" AmpFlex™).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.75
Simple Logger®Model L110 (RMS Current, 0 to 1AAC Input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.85
Simple Logger®Model L230 (RMS Voltage w/Leads, 0 to 300VAC Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.93
Simple Logger®Model L260 (RMS Voltage w/Leads, 0 to 600VAC Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.94
Simple Logger®Model L320 (DC Current, 4 to 20mADC Input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.97
Simple Logger®Model L410 (DC Voltage 0 to 100mVDC Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2114.05
Simple Logger®Model L430 (DC Voltage, 0 to 10VDC Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2114.07
Simple Logger®Model L605 (Temperature, Temperature-Internal/External Thermistor). . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2114.17
Simple Logger®Model L205 (Stray Voltage w/Leads, 0 to 25.5VAC Input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.05
Simple Logger®Model L215 (RMS Voltage, 0 to 250VAC Input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.07
Simple Logger®Model CL600 (Clamp-On, RMS Current, 0 to 600Arms Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.11
Simple Logger®Model L610 (Temperature, J Thermocouple). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.15
Simple Logger®Model L620 (Temperature, K Thermocouple) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.16
Simple Logger®Model L630 (Temperature, T Thermocouple) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.17
All models includes software, 6 ft DB9 RS-232 cable, 9V Alkaline battery and user manual
Models L205, L215, L230 and L260 also include 5 ft lead set
Accessories (Optional)
See pages 13 and 14 for a complete listing of accessories
Banana Jacks
Input Strip
Miniature T/C Input Connector
9 Pin RS-232 Output 5 Pin Circular RS-232 Output
•L100
•L110
•L205
•L215
•L230
•L260
•L410
•L430
•L320 (0 to 25mADC)
•L610 (black) (J T/C)
•L620 (yellow) (K T/C)
•L630 (blue) (T T/C)
•All Models (except AL series) •AL series (waterproof)
In-Line Connector
•L605 (10KΩ@ 25°C thermistor)