AERMEC ANK030 H User manual
11_11. 6755532_02
AERMEC S.p.A. reserves the right at any moment to make any modifications considered necessary to improve our products and is not obliged to add these modifications
to machines that have already been fabricated, delivered or are under construction.
Dear Customer,
Thank you for choosing an AERMEC product. This product is the result of many years of experience and in-
depth engineering research, and it is built using top quality materials and advanced technologies.
In addition, the CE mark guarantees that our appliances fully comply with the requirements of the European
Machinery Directive in terms of safety. We constantly monitor the quality level of our products, and as a result
they are synonymous with Safety, Quality, and Reliability.
Product data may be subject to modifications deemed necessary for improving the product without the obliga-
tion to give prior notice.
Thank you again.
AERMEC S.p.A
.......................................................... 6
1.1. Available version ............................................................................... 6
...................................................................................... 7
3. Cek list............................................................................................... 8
........................................... 9
4.1. Cooling circuit ................................................................................. 10
4.2. Frame and fans ............................................................................... 10
4.3. Hydraulic circuit standard ............................................................... 10
.......................................... 10
4.5. Water features ................................................................................ 10
4.6. Safety and control components...................................................... 10
4.7. Electric components ....................................................................... 11
................................................................ 12
6. Technical data ................................................................................. 13
................................................................................ 14
7.1. Cooling mode.................................................................................. 14
................................................................................. 14
................................................................................. 14
........................................................... 15
......... 15
......... 16
......... 17
.......... 18
.......... 19
.......... 20
.. 21
.. 22
.. 23
... 24
... 25
... 26
9. Pressure drop.................................................................................. 27
9.1. System side exchanger + piping pressure drop............................... 27
9.2. Filter pressure drops ....................................................................... 27
.................................................................... 28
................................................................. 29
11.1. How to interpret glycol curves........................................................ 29
12. Minimum/maximum of system water content .............................. 30
.......................................................... 30
13. Recommended minimum water content ........................................ 30
14. Sound data...................................................................................... 31
14.1. Sound levels .................................................................................... 31
................................. 31
15.1. Control parameters......................................................................... 31
.......................................................... 31
16. General warnings for the installer................................................... 32
................................................ 32
................... 32
.................................................. 33
17.1. Minimum technical ......................................................................... 33
17.2. Handling example ........................................................................... 33
18. Hydraulic circuits of principle.......................................................... 34
...... 34
18.2. Chydraulic circuit for internal and external ank “hp”...................... 35
18.3. Chydraulic circuit for internal and external ank “hp”...................... 36
19. System example .............................................................................. 37
.......................................................... 38
............................................................................. 39
....................................................... 39
...................................................................... 40
23.2. Ank 030-045-050 h.......................................................................... 40
23.1. Ank 030-045-050 ha........................................................................ 40
........................................................................ 41
............................................. 41
.......................... 41
of the user/installer ........................................................................ 41
25. Control and commissioning ............................................................ 42
....................................................... 42
25.2. Machine commissioning ................................................................. 42
25.3. Season changeover ......................................................................... 42
....................................................................... 43
26.1. Set point in cooling mode ............................................................... 43
............................................................... 43
26.3. Compressor start-up delay.............................................................. 43
............................................................................. 43
................................................ 43
............................................................................ 43
..................................................................... 43
27. Maintenance................................................................................... 43
27.1. Hydraulic circuit .............................................................................. 43
27.2. Electric circuit checks...................................................................... 43
27.3. Cooling circuit checks...................................................................... 43
27.4. Mechanical checks .......................................................................... 43
27.5. Extraordinary maintenance............................................................. 44
27.6. Load procedure............................................................................... 44
28. List of controls for the guided procedure........................................ 45
EN
11_11. 6755532_02
6
1. IP 24
2.
3. SOUND PRESSURE
Heating and cooling equipment.
Standard 70 National Electrical code
Safety Standard Electrical Installation.
The heat pumps for OUTDOOR condensed in the
air with R410A Series ANK have been designed and
manufactured to satisfy heating and cooling needs
in medium to small commercial or residential
buildings.
These units, have extremely silent functioning and
are highly efficient and reliable, thanks to the use
of exchangers with a large exchange surface and
low-noise high-efficiency scroll compressors.
Standard version
Version with circulation pump.
Version with circulation pump and storage tank.
TECHNICAL
PLATE
TECHNICAL
PLATE
EN
11_11. 6755532_02 7
030 - 045 - 050
7
HHeat pumps
°Standard
PWith pump
AWith storage tank
°Standard
°Aluminium
°Standard temperature of water produced up to 39,2°F / 4°C
EVAPORATOR
°Standard
1~220V 60Hz
EN
11_11. 6755532_02
Resistance compressor std
High pressure switch std
High pressure trasducer std
Low pressure trasducer std
Solenoid valve std
Plate exchanger std
Water filter yes yes yes
Flow switch yes yes yes
Safety valve yes yes yes
Air vent yes yes yes
Water filter yes yes yes
Flow switch yes yes yes
Safety valve yes yes yes
Air vent yes yes yes
Pump yes yes yes
Expansion tank yes yes yes
Water filter yes yes yes
Flow switch yes yes yes
Safety valve yes yes yes
Air vent yes yes yes
Pump yes yes yes
Expansion tank yes yes yes
Storage tank yes yes yes
EN
11_11. 6755532_02
Compressor
HPT High pressure transducer
HPS High pressure switch
Low pressure switch
4-way cycle reverse valve
Coil
One-way valves
Orifice
FDehydrator filter
Storage liquid
TEV Thermostatic valve
Plate exchanger
VFan/s
HO
H
TEV
F
CV
compressore
valvola
inversione
CV
MF
FS
BHE
CO
acc
umulo
liquido
pompa
HPSHPT
LPT
EV
LS
CP
AL
VIC
CN
EN
11_11. 6755532_02
High efficient scroll on anti-vibration mounts, acti-
vated by a 2-pole electric motor with internal heat
protection. They are supplied, as standard, with an
electric heater resistance, powered automatically
when the unit stops as long as the unit is power on.
Made with copper pipes and aluminium louvered
fins blocked by mechanical expansion of the pipes,
equipped with protection grid.
Unit with heat plate, insulated externally
with closed cell material to reduce heat loss.
Positioned at compressor inlet to protect from
refrigerant return.
evaporator, depending on the heat load, in order to
Mechanical dehydrator filter realised in ceramics
and hygroscopic material, able to withhold impuri-
ties and any traces of humidity present in the cool-
ing circuit.
Used to check the refrigerant gas load and any pres-
ence of humidity in the cooling circuit.
-
cycles.
Used to keep the refrigerant gas in the liquid state
when the machine accumulates it excessively during
functioning.
Made in hot galvanised sheet steel with suitable
thickness and painted with polyester powders able
electric fans are protected electrically by magnet-
metal grids, according to the IEC EN 60335-2-40
Standard.
Equipped with steel filtering mesh; prevents the
heat exchangers from clogging.
It checks that there is circulation of water.If
this is not the case, it blocks the unit
Set at 6 bar and the discharge conveyor, discharging
the excess pressure occurs in the event of abnormal
pressures
assembled on the upper part of the hydraulic sy-
stem; it releases any air bubbles that may be present
in the system.
Positioned above evaporator, it has the task of
controlling that there is water circulation.
Adversary, it blocks the unit.
Calibrated at 6 BAR and with piped discharger,
dischargers if abnormal pressure occurs.
mesh with holes that do not exceed one millimetre.
It is indispensable in order to prevent serious damage
to the plate exchanger.
With nitrogen pre-load membrane
pressure drops
In stainless steel, with a 100-litre capacity. In
order to reduce the thermal dispersion and
-
of a suitable thickness.
Allows discharge of water
WATER FEATURES
PH 6-8
less than 200 mV/cm
less than 50 ppm
less than 50 ppm
less than 0.3 ppm
less than 50 ppm
less than 50 ppm
none
none
less than 30 ppm
With fixed calibration, placed on high pressure side
of cooling circuit, inhibits functioning of compressor
if abnormal work pressure occurs.
Placed on low pressure side of cooling circuit, signals
the work pressure to control board, generating a pre-
warning in case abnormal pressure occurs.
EN
11_11. 6755532_02
Placed on high pressure side of cooling circuit, sig-
nals the work pressure to control board, generating a
pre-warning in case abnormal pressure occurs.
Contains the power section and the management of
controls and safety devices. It is in compliance with
the IEC 60204-1 Standard and the Directives regard-
ing electromagnetic compatibility EMC 89/336/CEE
and 92/31/CEE.
Allows the complete control of the appliance.
For a more in-depth description please refer to the
user manual.
Temperature control of the output water with proportional-integral
algorithm: maintains average output temperature at value set
- Self-adapting differential switch: guarantees minimum functioning
times of the compressor in systems with low water content.
- Intelligent defrosting for pressure reduction: allows to determine
when the coil is effectively defrosted, avoiding useless defrosting
- Set-point compensation with external temperature (with external
- Condensation check based on the pressure rather than on tem-
Inverse condensation check for the heat pump functioning mode
- Pre-alarms with automatic reset: in the case of alarm, a certain
number of re-starts are allowed before the definitive block
blocked cycle reversing valve
- Compressor functioning hours count.
- Compressor peak count.
- Historical alarms
- Autostart after voltage drop.
- Local or remote control
Display of the start of the unit:
1. Voltage presence
2. compressor ON/OFF
3.
4.
1. Water outlet
2. water inlet
3.
4. Pressing gas temperature
5. External air temperature (heat pumps, cooling only with DCPX
6.
7.
8.
9.
10. Alarms management:
11. Low pressure
12. High pressure (primary alarm: switch directly blocks supply to
13. High discharge temperature
14.
15.
-
fore blocking.
ON/OFF external contact
Change season from external contact
EN
11_11. 6755532_02
VT
VT9 VT9 VT9
HA
VT15 VT15 VT15
Group of anti-vibration
EN
11_11. 6755532_02
Cooling capacity ALL ton 2,51 3,35 4,02
Total input power H kW 2,81 3,85 4,32
HP-HA kW 3,01 4,05 4,52
ALL gpm 6,0 8,0 9,5
Pressure drop + piping H p.s.i. 1,1 1,3 2,0
H p.s.i. 0,2 0,4 0,5
ALL BTU/h 37670 51967 57598
Total input power H kW 3,05 4,00 4,33
HP-HA kW 3,25 4,20 4,53
ALL gpm 8,4 11,5 12,8
Pressure drop + piping H p.s.i. 2,1 2,7 3,6
H p.s.i. 0,3 0,8 0,9
EER H BTU/W 10,73 10,46 11,18
HP-HA BTU/W 8,94 9,94 10,68
COP H W/W 3,62 3,81 3,89
HP-HA W/W 3,40 3,63 3,73
IPLV ALL - 4,36 4,25 4,53
ALL 220/1/60
H
A
14,2 16,9 18,3
HP-HA 15,1 17,8 19,2
Total input current cooling mode H 13,0 16,3 18,2
Total input current cooling mode HP-HA 13,9 17,2 19,1
ALL 45,0 45,0 45,0
MCA H 27,3 37,1 33,6
MCA HP-HA 28,3 38,1 34,6
MOP ALL 45,0 60,0 60,0
ALL n° 2 2 2
Total input power ALL cfm 244 244 244
ALL kW 0,3 0,3 0,3
EVAPORATOR
ALL n° 1 1 1
ALL inch 1" 1/4 1" 1/4 1" 1/4
ALL lb 9 12 13
N. compressors/circuits ALL n°/n° 1/1 1/1 1/1
Capacity control ALL - 0-100 0-100 0-100
Oil charge ALL oz 30 30 30
PUMP
Input power - kW 0,2 0,2 0,2
Input current - A 0,9 0,9 0,9
Useful head in cooling mode - p.s.i. 10,4 10,0 9,1
Useful head in heathing mode - p.s.i. 8,9 7,8 6,8
Storage tank - gal 26 26 26
Capacity - oz 169 169 169
-psi 22 22 22
- n° 1 1 1
Sound power -dBA 70,5 70,5 70,5
Sound pressure at 10 m -dBA 39,5 39,5 39,5
Height - in 50 50 50
Width - in 39 39 39
Depth - in 18 18 18
Empty weight "H" H lb 328 364 379
Empty weight "HP" HP lb 340 386 401
Height - in 50 50 50
Width - in 57 57 57
Depth - in 18 18 18
Empty weight "HA" HA lb 417 463 478
Outlet water temperature 6,7°C / 44,6°F
Flow rate 0,043l/s per kW
External temperature 35°C / 95°F
The total input power not include the pump.
Water input temperature 104°F / 40°C
Output water temperature 113°F / 45°C
External air temperature d.b./w.b. 44,6-42,8°F / 7-6°C
The reported data can be amended any time Aermec
considers it necessary.
Aermec determines sound power values in agreement with
the 9614-2 Standard, in compliance with that requested by
Eurovent certification.
Sound pressure measured in free field conditions with
from external surface of unit, in compliance with ISO 3744
regulations.
EN
11_11. 6755532_02
Temperature of produced water
50
°C
45
40
35
30
25
20
15
10
0
-5
-10
-15
122
°F
113
104
95
86
77
68
59
50
32
23
14
5
39,5 41 50 59 64,4 °F
4 5 10 15 18 °C
External air temperature
The devices in their standard configuration, are not
suitable for installation in a saline environment. To
the limits of operation, please refer to the diagram,
valid for AHRI standard conditions.
-25
20
25
30
35
40
45
50
55
60
65
°C
68
77
86
95
104
113
122
131
140
149
°F
-20 -15 -10 -5 0510 15 20 25 30 35 40 45 °C
-13 -4 514233241505968778695 104 113 °F
Temperature of the water produced
External air temperature b.s.
-25
20
25
30
35
40
45
50
55
60
65
°C
68
77
86
95
104
113
122
131
140
149
°F
-20 -15 -10 -5 0510 15 20 25 30 35 40 45 °C
-13 -4 514233241505968778695 104 113 °F
-25
20
25
30
35
40
45
50
55
60
65
°C
68
77
86
95
104
113
122
131
140
149
°F
-20 -15 -10 -5 0510 15 20 25 30 35 40 45 °C
-13 -4 514233241505968778695 104 113 °F
Temperature of the water produced
External air temperature b.s.
EN
11_11. 6755532_02
TAE
Ph
Ph
Ph
Ph
Ph
Ph
Ph
Ph
21702 1,93 3,29 20166 2,25 2,63 18441 2,48 2,18 16492 2,67 1,81 14393 2,83 1,49 12182 3,01 1,19 - - - - - -
22377 1,94 3,38 20990 2,25 2,74 19379 2,49 2,28 17617 2,69 1,92 15630 2,86 1,60 13531 3,03 1,31 - - - - - -
22939 1,93 3,48 21665 2,25 2,83 20203 2,50 2,37 18554 2,70 2,02 16717 2,87 1,71 14768 3,05 1,42 - - - - - -
23389 1,92 3,57 22302 2,25 2,91 20953 2,50 2,46 19416 2,71 2,10 17729 2,88 1,80 15893 3,06 1,52 13906 3,27 1,25 - - -
23839 1,91 3,65 22864 2,25 2,98 21665 2,50 2,54 20278 2,71 2,20 18704 2,89 1,89 16980 3,07 1,62 15143 3,28 1,35 - - -
24364 1,90 3,75 23502 2,24 3,08 22415 2,49 2,64 21140 2,71 2,29 19716 2,89 2,00 18104 3,08 1,72 16380 3,29 1,46 14543 3,53 1,21
24926 1,88 3,88 24214 2,23 3,19 23277 2,49 2,74 22115 2,71 2,39 20803 2,89 2,11 19304 3,08 1,84 17692 3,29 1,58 15968 3,54 1,32
25301 1,88 3,94 24626 2,23 3,24 23652 2,52 2,75 22640 2,71 2,45 21290 2,90 2,15 19941 3,09 1,89 18404 3,30 1,64 16717 3,54 1,38
25676 1,87 4,02 25076 2,22 3,32 24251 2,49 2,85 23202 2,71 2,51 22002 2,90 2,22 20653 3,09 1,96 19154 3,30 1,70 17542 3,55 1,45
26613 1,86 4,19 26125 2,22 3,45 25413 2,49 2,99 24514 2,71 2,65 23427 2,90 2,37 22152 3,10 2,09 20765 3,30 1,84 19266 3,56 1,59
27812 1,86 4,37 27437 2,22 3,63 26838 2,49 3,16 26050 2,72 2,81 25076 2,91 2,52 23914 3,10 2,26 22640 3,31 2,00 21253 3,57 1,74
29311 1,86 4,61 29087 2,22 3,85 28599 2,50 3,35 27887 2,73 3,00 27025 2,92 2,71 25975 3,12 2,44 24814 3,32 2,19 23539 3,58 1,93
30211 1,86 4,75 30024 2,23 3,95 29574 2,50 3,47 28937 2,74 3,10 28149 2,93 2,81 27137 3,13 2,54 26013 3,33 2,29 24776 3,59 2,02
- - - 31748 2,23 4,18 30661 2,49 3,61 30398 2,74 3,26 29536 2,95 2,93 28449 3,14 2,66 27100 3,34 2,37 25451 3,60 2,07
- - - 35459 2,25 4,63 34671 2,53 4,02 33772 2,77 3,58 32722 2,96 3,24 31485 3,16 2,92 29949 3,37 2,60 28074 3,63 2,27
6- - - 39019 2,28 5,03 38120 2,56 4,36 37108 2,80 3,89 35908 3,00 3,51 34484 3,20 3,16 32797 3,40 2,82 30736 3,66 2,46
7- - - 40781 2,29 5,21 40931 2,59 4,63 38720 2,81 4,03 35983 3,22 3,28 34184 3,43 2,92 32085 3,68 2,56
- - - 42468 2,41 5,16 41456 2,66 4,57 40331 2,87 4,11 39019 3,08 3,71 37445 3,28 3,35 35608 3,49 2,99 33397 3,72 2,63
- - - 45729 2,53 5,30 44642 2,78 4,71 43405 2,99 4,25 42018 3,19 3,86 40331 3,38 3,49 38345 3,59 3,13 36021 3,81 2,77
- - - 48765 2,63 5,44 47603 2,87 4,86 46329 3,08 4,41 44829 3,28 4,01 43068 3,47 3,64 40969 3,68 3,26 38532 3,90 2,89
- - - 51464 2,72 5,55 50302 2,96 4,98 48952 3,17 4,53 47416 3,36 4,13 45579 3,55 3,76 43442 3,76 3,39 40894 3,97 3,02
- - - 52925 2,80 5,55 51951 3,03 5,02 50789 3,25 4,59 49402 3,43 4,22 47753 3,62 3,87 45766 3,81 3,52 43442 4,04 3,15
- - - 54312 2,86 5,56 53375 3,10 5,05 52288 3,30 4,64 50939 3,50 4,26 49327 3,68 3,93 47378 3,87 3,58 45054 4,09 3,23
- - - 55399 2,92 5,56 54500 3,16 5,06 53450 3,36 4,66 52138 3,55 4,30 50564 3,74 3,97 48652 3,92 3,63 46329 4,14 3,28
- - - 56186 2,96 5,56 55362 3,20 5,07 54350 3,40 4,68 53075 3,59 4,33 51539 3,78 4,00 49627 3,96 3,67 47303 4,18 3,32
- - - 56786 3,00 5,55 55999 3,24 5,07 55025 3,44 4,68 53788 3,63 4,34 52251 3,81 4,02 50339 3,99 3,70 48053 4,21 3,35
- - - 57198 3,03 5,53 56449 3,27 5,07 55474 3,46 4,70 54275 3,65 4,36 52738 3,83 4,03 50826 4,02 3,70 - - -
---57423 3,05 5,52 56711 3,29 5,06 55774 3,49 4,68 54575 3,67 4,36 53038 3,85 4,03 51164 4,04 3,71 ---
---57536 3,06 5,51 56861 3,30 5,06 55924 3,50 4,68 54762 3,69 4,35 53225 3,86 4,04 51351 4,05 3,72 ---
- - - 57573 3,07 5,50 56899 3,30 5,05 55999 3,51 4,67 54800 3,70 4,34 53300 3,87 4,03 51426 4,06 3,71 - - -
- - - 57536 3,07 5,49 56899 3,30 5,05 55999 3,51 4,67 54837 3,70 4,35 53300 3,87 4,03 51389 4,06 3,71 - - -
- - - 57498 3,06 5,51 56861 3,30 5,04 55962 3,51 4,67 54800 3,70 4,34 53263 3,87 4,03 51351 4,06 3,71 - - -
- - - 57461 3,05 5,52 56861 3,30 5,06 55962 3,50 4,68 54762 3,69 4,35 53225 3,87 4,03 51276 4,06 3,70 - - -
- - - 57498 3,04 5,54 56899 3,29 5,08 55999 3,49 4,70 54800 3,69 4,36 53225 3,86 4,04 51276 4,06 3,70 - - -
- - - 57611 3,02 5,59 57011 3,27 5,12 56111 3,48 4,72 54912 3,68 4,38 53300 3,85 4,05 51314 4,05 3,71 - - -
Heating capacity correction factors 0,99 1,01 1,02
Total input power correction factors 1,01 0,98 0,96
Ph
Pe
Total Input Power
TAE
For intermediate points refer to the diagrams of operating limits.
EN
11_11. 6755532_02
TAE
Ph
Ph
Ph
Ph
Ph
Ph
Ph
Ph
28823 2,62 3,23 27170 2,98 2,68 25136 3,26 2,26 22720 3,49 1,91 20007 3,72 1,58 16997 3,94 1,27 - - - - - -
30180 2,62 3,38 28569 2,99 2,80 26577 3,28 2,37 24246 3,53 2,02 21660 3,76 1,69 18735 3,99 1,38 - - - - - -
31409 2,61 3,53 29798 2,98 2,93 27891 3,29 2,48 25644 3,55 2,12 23144 3,79 1,79 20304 4,02 1,48 - - - - - -
32511 2,59 3,68 30943 2,97 3,06 29120 3,28 2,60 26958 3,56 2,22 24542 3,80 1,89 21829 4,04 1,58 18947 4,31 1,29 - - -
33528 2,55 3,85 32045 2,96 3,18 30265 3,27 2,71 28230 3,56 2,33 25899 3,81 1,99 23355 4,05 1,69 20600 4,32 1,40 - - -
34546 2,52 4,01 33147 2,92 3,32 31451 3,26 2,83 29502 3,55 2,44 27297 3,81 2,10 24881 4,06 1,79 22253 4,33 1,51 19498 4,64 1,23
35648 2,48 4,21 34291 2,90 3,46 32681 3,24 2,96 30816 3,54 2,55 28739 3,80 2,22 26492 4,06 1,91 24034 4,34 1,62 21448 4,65 1,35
36199 2,46 4,31 34885 2,89 3,54 33316 3,24 3,01 31536 3,54 2,61 29544 3,80 2,28 27340 4,06 1,97 24966 4,34 1,69 22465 4,65 1,41
36792 2,45 4,40 35521 2,87 3,63 33995 3,23 3,08 32257 3,53 2,68 30349 3,80 2,34 28230 4,06 2,04 25941 4,34 1,75 23525 4,65 1,48
38106 2,42 4,62 36919 2,85 3,80 35521 3,21 3,24 33910 3,51 2,83 32087 3,79 2,48 30137 4,06 2,17 28060 4,34 1,90 25814 4,66 1,62
39632 2,39 4,87 38530 2,83 3,99 37216 3,20 3,41 35733 3,51 2,98 34079 3,80 2,63 32299 4,06 2,33 30392 4,35 2,05 28357 4,68 1,78
41412 2,36 5,13 40395 2,82 4,20 39208 3,20 3,59 37852 3,51 3,16 36368 3,80 2,81 34715 4,07 2,50 33020 4,36 2,22 31197 4,69 1,95
42387 2,36 5,25 41455 2,82 4,31 40310 3,20 3,69 39039 3,53 3,25 37598 3,81 2,89 36072 4,08 2,59 34461 4,37 2,31 32765 4,70 2,04
- - - 43617 2,83 4,52 41370 3,24 3,74 40649 3,54 3,37 38912 3,87 2,94 37470 4,09 2,68 35648 4,39 2,38 33656 4,71 2,10
- - - 49381 2,84 5,10 47771 3,23 4,34 46160 3,56 3,80 44422 3,85 3,38 42557 4,13 3,02 40480 4,42 2,68 38149 4,74 2,36
6- - - 54764 2,87 5,59 53027 3,26 4,77 51246 3,60 4,17 49381 3,89 3,72 47304 4,18 3,32 45015 4,46 2,96 42430 4,79 2,60
7- - - 57265 3,01 5,58 56799 3,40 4,90 53662 3,72 4,23 49593 4,30 3,38 47177 4,58 3,02 44464 4,89 2,67
- - - 59639 3,07 5,69 57859 3,45 4,91 55994 3,78 4,34 53959 4,07 3,88 51755 4,35 3,49 49254 4,62 3,12 46457 4,92 2,77
- - - 64090 3,21 5,85 62267 3,58 5,10 60317 3,89 4,54 58198 4,17 4,09 55824 4,44 3,68 53154 4,71 3,31 50144 5,00 2,94
- - - 68032 3,34 5,98 66209 3,69 5,25 64217 4,00 4,71 62013 4,27 4,25 59554 4,53 3,85 56757 4,79 3,47 53578 5,08 3,09
- - - 71507 3,45 6,07 69685 3,80 5,38 67693 4,11 4,83 65446 4,37 4,39 62903 4,62 3,99 59978 4,88 3,60 56672 5,15 3,22
- - - 73288 3,57 6,02 71719 3,91 5,38 70024 4,20 4,89 68117 4,45 4,48 65828 4,70 4,11 63115 4,95 3,74 59893 5,22 3,36
- - - 75153 3,66 6,01 73669 4,00 5,40 72059 4,28 4,93 70193 4,54 4,53 67989 4,78 4,17 65319 5,02 3,81 62140 5,29 3,44
- - - 76594 3,76 5,97 75238 4,08 5,40 73669 4,36 4,95 71889 4,61 4,57 69685 4,84 4,22 67099 5,09 3,87 63878 5,35 3,50
- - - 77696 3,84 5,93 76382 4,16 5,38 74898 4,43 4,95 73161 4,68 4,59 71041 4,91 4,24 68456 5,15 3,90 65277 5,41 3,53
- - - 78501 3,91 5,89 77272 4,23 5,35 75831 4,50 4,94 74136 4,74 4,58 72016 4,97 4,25 69431 5,20 3,91 66294 5,47 3,55
- - - 79010 3,97 5,84 77866 4,28 5,33 76467 4,55 4,93 74814 4,79 4,58 72737 5,01 4,25 70151 5,26 3,91 - - -
---79349 4,02 5,78 78205 4,33 5,30 76891 4,59 4,91 75238 4,83 4,56 73203 5,06 4,24 70617 5,29 3,91 ---
---79476 4,05 5,75 78417 4,36 5,27 77103 4,62 4,89 75492 4,87 4,55 73457 5,09 4,23 70872 5,32 3,90 ---
- - - 79519 4,07 5,72 78501 4,38 5,25 77230 4,64 4,87 75619 4,89 4,54 73542 5,11 4,22 70956 5,35 3,89 - - -
- - - 79476 4,08 5,70 78459 4,39 5,24 77230 4,65 4,86 75619 4,89 4,54 73584 5,12 4,21 70956 5,36 3,88 - - -
- - - 79392 4,07 5,71 78459 4,38 5,25 77187 4,64 4,87 75619 4,89 4,54 73542 5,12 4,21 70914 5,36 3,88 - - -
- - - 79392 4,05 5,74 78417 4,36 5,27 77187 4,63 4,88 75577 4,88 4,54 73500 5,11 4,22 70829 5,35 3,88 - - -
- - - 79434 4,01 5,80 78459 4,33 5,31 77230 4,60 4,92 75619 4,84 4,57 73500 5,09 4,23 70787 5,34 3,88 - - -
- - - 79603 3,96 5,89 78629 4,27 5,39 77399 4,55 4,99 75746 4,80 4,62 73584 5,04 4,27 70787 5,31 3,91 - - -
Ph
Pe
Total Input Power
TAE
For intermediate points refer to the diagrams of operating limits.
Heating capacity correction factors 0,99 1,01 1,02
Total input power correction factors 1,01 0,98 0,96
EN
11_11. 6755532_02
TAE
Ph
Ph
Ph
Ph
Ph
Ph
Ph
27375 2,66 3,01 27825 3,08 2,65 27038 3,44 2,30 25166 3,74 1,97 22395 4,03 1,63 18874 4,32 1,28 - - -
28611 2,67 3,14 29136 3,10 2,75 28461 3,46 2,41 26814 3,77 2,08 24267 4,07 1,75 21084 4,36 1,42 - - -
30147 2,67 3,31 30708 3,11 2,89 30109 3,47 2,54 28611 3,78 2,22 26327 4,09 1,89 23406 4,38 1,57 - - -
31907 2,67 3,50 32431 3,10 3,06 31907 3,47 2,69 30521 3,79 2,36 28424 4,10 2,03 25803 4,40 1,72 22769 4,73 1,41
33779 2,66 3,72 34266 3,10 3,24 33779 3,47 2,85 32506 3,79 2,51 30559 4,10 2,19 28162 4,41 1,87 25428 4,74 1,57
35727 2,65 3,95 36139 3,09 3,43 35652 3,46 3,02 34453 3,79 2,66 32618 4,10 2,33 30409 4,41 2,02 27975 4,75 1,73
37674 2,64 4,18 38011 3,08 3,61 37487 3,45 3,18 36288 3,78 2,81 34566 4,10 2,47 32543 4,41 2,16 30334 4,76 1,87
38648 2,63 4,30 38872 3,08 3,70 38348 3,45 3,26 37150 3,78 2,88 35464 4,10 2,54 33517 4,41 2,23 31382 4,76 1,93
39546 2,63 4,40 39734 3,08 3,78 39172 3,45 3,33 37974 3,78 2,94 36326 4,10 2,60 34416 4,42 2,28 32394 4,76 1,99
41307 2,63 4,60 41344 3,08 3,93 40632 3,45 3,45 39397 3,78 3,05 37786 4,10 2,70 35989 4,42 2,39 34154 4,77 2,10
42879 2,65 4,74 42692 3,09 4,05 41831 3,46 3,54 40558 3,79 3,13 38947 4,12 2,77 37225 4,43 2,46 35502 4,78 2,18
44153 2,67 4,84 43703 3,11 4,12 42730 3,49 3,59 41307 3,82 3,17 39696 4,13 2,81 37974 4,46 2,50 36401 4,80 2,22
44640 2,69 4,86 44115 3,13 4,13 42992 3,50 3,60 41531 3,83 3,18 39883 4,14 2,82 38198 4,47 2,51 36625 4,82 2,23
- - - 44377 3,15 4,13 43291 3,46 3,66 41644 3,85 3,17 39958 4,15 2,82 38273 4,49 2,50 36738 4,84 2,23
- - - 53140 3,20 4,87 50931 3,57 4,18 49283 3,90 3,70 47823 4,21 3,33 46250 4,53 2,99 44228 4,89 2,65
6- - - 60106 3,28 5,38 57859 3,65 4,65 56062 3,97 4,14 54451 4,28 3,73 52691 4,60 3,35 50444 4,94 2,99
7- - - 63214 3,42 5,41 60930 3,72 4,81 59095 4,03 4,30 55575 4,65 3,50 53215 4,99 3,12
- - - 66098 3,49 5,55 63776 3,79 4,93 61904 4,10 4,43 60181 4,40 4,01 58234 4,71 3,62 55799 5,05 3,24
- - - 71228 3,63 5,75 68869 3,93 5,14 66922 4,22 4,64 65049 4,52 4,22 62990 4,83 3,82 60368 5,15 3,44
- - - 75498 3,75 5,89 73101 4,06 5,28 71116 4,34 4,80 69169 4,63 4,38 66997 4,93 3,98 64225 5,25 3,59
- - - 78980 3,87 5,98 76621 4,16 5,39 74599 4,45 4,92 72614 4,73 4,50 70330 5,02 4,10 67446 5,33 3,71
- - - 80853 3,98 5,96 78906 4,26 5,43 77258 4,54 4,98 75535 4,83 4,59 73401 5,11 4,21 70517 5,41 3,82
- - - 83287 4,07 6,00 81302 4,36 5,47 79617 4,63 5,04 77857 4,91 4,65 75685 5,19 4,28 72801 5,49 3,89
- - - 85197 4,14 6,02 83212 4,44 5,50 81490 4,71 5,07 79729 4,98 4,69 77557 5,26 4,32 74599 5,55 3,94
- - - 86695 4,21 6,03 84673 4,50 5,52 82950 4,78 5,09 81190 5,04 4,72 78980 5,32 4,35 76022 5,61 3,97
- - - 87781 4,26 6,04 85796 4,55 5,52 84074 4,83 5,10 82239 5,10 4,73 80029 5,37 4,36 77071 5,66 3,99
- - - 88567 4,31 6,02 86545 4,60 5,51 84823 4,88 5,10 83025 5,15 4,73 80778 5,41 4,37 77782 5,70 4,00
---89054 4,34 6,01 87070 4,63 5,51 85309 4,92 5,09 83512 5,18 4,73 81265 5,45 4,37 78269 5,72 4,01
---89354 4,36 6,01 87332 4,66 5,49 85609 4,94 5,07 83774 5,21 4,71 81564 5,48 4,36 78569 5,75 4,00
- - - 89429 4,37 6,00 87444 4,67 5,49 85721 4,95 5,07 83886 5,23 4,70 81677 5,50 4,35 78681 5,77 3,99
- - - 89391 4,37 6,00 87407 4,68 5,47 85721 4,96 5,06 83924 5,24 4,70 81677 5,51 4,34 78718 5,78 3,99
- - - 89279 4,36 6,00 87332 4,67 5,48 85646 4,96 5,06 83849 5,24 4,69 81639 5,51 4,34 78681 5,78 3,99
- - - 89167 4,34 6,02 87219 4,66 5,48 85534 4,95 5,06 83774 5,24 4,69 81602 5,51 4,34 78643 5,78 3,99
- - - 89054 4,31 6,05 87144 4,63 5,51 85497 4,93 5,08 83774 5,22 4,71 81602 5,50 4,35 78681 5,77 3,99
- - - 89054 4,26 6,12 87182 4,60 5,55 85534 4,91 5,11 83849 5,20 4,73 81714 5,48 4,37 78793 5,75 4,01
Ph
Pe
Total Input Power
TAE
For intermediate points refer to the diagrams of operating limits.
Heating capacity correction factors 0,99 1,01 1,02
Total input power correction factors 1,01 0,98 0,96
EN
11_11. 6755532_02
TAE
7
P
EER
P
EER
P
EER
P
EER
P
EER
P
EER
3,34 4,14 9,69 3,42 4,15 9,90 3,58 4,16 10,33 3,83 4,19 10,96 4,27 4,24 12,10 4,57 4,27 12,84
3,29 3,75 10,52 3,37 3,76 10,74 3,53 3,78 11,21 3,77 3,81 11,90 4,22 3,85 13,14 4,51 3,89 13,94
3,24 3,42 11,39 3,32 3,42 11,63 3,48 3,44 12,15 3,73 3,46 12,90 4,17 3,51 14,25 4,47 3,55 15,11
3,19 3,12 12,29 3,27 3,12 12,57 3,43 3,14 13,10 3,68 3,17 13,92 4,12 3,22 15,37 4,42 3,25 16,30
3,15 2,86 13,21 3,23 2,87 13,50 3,39 2,89 14,09 3,63 2,91 14,97 4,08 2,96 16,53 4,37 2,99 17,53
3,11 2,64 14,11 3,19 2,65 14,41 3,34 2,67 15,05 3,59 2,69 15,99 4,04 2,74 17,66 4,33 2,78 18,72
3,07 2,46 14,96 3,15 2,47 15,29 3,30 2,48 15,97 3,55 2,51 16,97 4,00 2,56 18,69 4,29 2,59 19,86
3,03 2,31 15,73 3,11 2,32 16,07 3,26 2,33 16,79 3,51 2,36 17,85 3,95 2,41 19,65 4,25 2,45 20,83
62,99 2,19 16,36 3,07 2,20 16,71 3,23 2,22 17,46 3,47 2,24 18,56 3,91 2,30 20,43 4,21 2,33 21,73
2,95 2,10 16,82 3,03 2,11 17,19 3,19 2,13 17,97 3,43 2,16 19,11 3,88 2,21 21,04 4,17 2,24 22,31
2,91 2,04 17,09 2,99 2,05 17,48 3,15 2,07 18,22 3,39 2,10 19,39 3,84 2,15 21,43 4,13 2,18 22,73
2,87 2,01 17,15 2,95 2,02 17,54 3,11 2,03 18,36 3,36 2,07 19,49 3,80 2,11 21,56 4,09 2,15 22,86
2,83 2,00 17,01 2,91 2,01 17,42 3,07 2,03 18,18 3,32 2,05 19,38 3,76 2,10 21,47 4,06 2,13 22,79
2,79 2,01 16,68 2,87 2,02 17,06 3,03 2,03 17,88 3,27 2,06 19,08 3,72 2,11 21,10 4,01 2,15 22,41
2,75 2,04 16,19 2,83 2,05 16,58 2,99 2,07 17,35 3,23 2,09 18,52 3,67 2,14 20,59 3,97 2,18 21,91
2,71 2,09 15,57 2,78 2,09 15,96 2,94 2,11 16,70 3,19 2,14 17,87 3,63 2,19 19,90 3,93 2,22 21,19
2,66 2,15 14,86 2,74 2,16 15,24 2,90 2,18 15,98 3,14 2,20 17,11 3,58 2,25 19,11 3,88 2,29 20,32
2,61 2,22 14,09 2,69 2,23 14,48 2,85 2,25 15,19 3,09 2,28 16,30 3,54 2,33 18,20 3,83 2,37 19,43
2,56 2,31 13,29 2,64 2,32 13,66 2,80 2,34 14,35 3,04 2,37 15,42 3,48 2,41 17,32 3,78 2,46 18,48
2,51 2,41 12,49 2,58 2,41 12,84 2,74 2,43 13,51 2,99 2,46 14,56 3,43 2,52 16,36 3,73 2,55 17,53
2,45 2,51 11,69 2,53 2,52 12,01 2,68 2,54 12,69 2,93 2,56 13,71 3,37 2,62 15,45 3,67 2,65 16,59
2,38 2,62 10,92 2,46 2,63 11,26 2,62 2,65 11,89 2,87 2,67 12,87 3,31 2,73 14,55 3,61 2,76 15,66
2,32 2,73 10,18 2,40 2,74 10,49 2,56 2,76 11,10 2,80 2,79 12,04 3,24 2,84 13,71 3,54 2,87 14,78
2,28 2,79 9,83 2,36 2,80 10,13 2,77 2,84 11,67 3,21 2,89 13,31
2,25 2,84 9,48 2,32 2,85 9,79 2,48 2,87 10,38 2,73 2,90 11,30 3,17 2,95 12,89 3,47 2,99 13,93
2,17 2,96 8,81 2,25 2,97 9,09 2,41 2,98 9,70 2,65 3,01 10,56 3,09 3,06 12,13 3,39 3,10 13,14
2,09 3,07 8,18 2,17 3,08 8,45 2,32 3,09 9,03 2,57 3,12 9,90 3,01 3,17 11,40 3,31 3,21 12,39
2,00 3,17 7,58 2,08 3,18 7,85 2,24 3,20 8,40 2,48 3,23 9,24 2,93 3,27 10,72 - - -
1,91 3,27 7,01 1,98 3,27 7,27 2,15 3,29 7,81 2,39 3,32 8,63 - - - - - -
1,81 3,35 6,47 1,89 3,36 6,73 2,04 3,38 7,27 2,29 3,41 8,06 - - - - - -
Pc
Cooling capacity
Pe
Total Input Power
TAE
For intermediate points refer to the diagrams of operating limits.
Cooling capacity correction factor 0,99 1,02 1,03
Input power correction factor 0,99 1,01 1,02
[K*m2]/[W]
Cooling capacity correction factor 0,98 0,94
Input power correction factor 0,98 0,95
EN
11_11. 6755532_02
TAE
7
P
EER
P
EER
P
EER
P
EER
P
EER
P
EER
4,47 5,67 9,45 4,57 5,68 9,66 4,78 5,70 10,07 5,11 5,74 10,69 5,71 5,80 11,80 6,10 5,85 12,52
4,40 5,14 10,25 4,50 5,16 10,47 4,71 5,18 10,93 5,04 5,21 11,61 5,64 5,28 12,81 6,03 5,33 13,59
4,33 4,68 11,10 4,43 4,69 11,34 4,65 4,71 11,84 4,98 4,75 12,58 5,57 4,81 13,89 5,97 4,86 14,73
4,27 4,27 11,99 4,37 4,28 12,26 4,59 4,31 12,77 4,91 4,35 13,57 5,51 4,41 14,99 5,90 4,46 15,89
4,21 3,92 12,88 4,31 3,93 13,16 4,53 3,95 13,74 4,85 3,99 14,60 5,45 4,06 16,12 5,84 4,10 17,09
4,15 3,62 13,76 4,26 3,64 14,05 4,47 3,65 14,68 4,80 3,69 15,60 5,39 3,76 17,22 5,79 3,80 18,26
4,10 3,37 14,59 4,20 3,38 14,91 4,41 3,40 15,57 4,74 3,44 16,55 5,34 3,51 18,23 5,73 3,55 19,37
4,04 3,16 15,33 4,15 3,18 15,67 4,36 3,20 16,37 4,69 3,23 17,40 5,28 3,31 19,16 5,68 3,35 20,31
63,99 3,00 15,95 4,10 3,02 16,29 4,31 3,04 17,03 4,64 3,07 18,10 5,23 3,15 19,92 5,63 3,19 21,19
3,94 2,88 16,40 4,05 2,90 16,76 4,26 2,92 17,52 4,59 2,95 18,64 5,18 3,03 20,52 5,57 3,07 21,76
3,89 2,80 16,66 3,99 2,81 17,04 4,21 2,84 17,77 4,53 2,88 18,91 5,13 2,94 20,90 5,52 2,99 22,16
3,84 2,75 16,73 3,94 2,77 17,11 4,15 2,78 17,90 4,48 2,83 19,00 5,07 2,90 21,02 5,47 2,94 22,29
3,78 2,74 16,59 3,89 2,75 16,99 4,10 2,78 17,73 4,43 2,81 18,89 5,02 2,88 20,93 5,42 2,92 22,23
3,73 2,75 16,26 3,83 2,77 16,64 4,05 2,78 17,43 4,37 2,82 18,60 4,97 2,90 20,57 5,36 2,94 21,85
3,67 2,79 15,78 3,78 2,80 16,17 3,99 2,83 16,92 4,32 2,87 18,06 4,91 2,93 20,08 5,31 2,98 21,36
3,61 2,86 15,18 3,72 2,87 15,56 3,93 2,90 16,29 4,26 2,93 17,42 4,85 3,00 19,41 5,25 3,05 20,66
3,55 2,94 14,49 3,66 2,95 14,86 3,87 2,98 15,59 4,20 3,02 16,69 4,79 3,08 18,64 5,18 3,14 19,81
3,49 3,05 13,74 3,59 3,06 14,12 3,81 3,08 14,81 4,13 3,12 15,90 4,73 3,20 17,75 5,12 3,24 18,95
3,42 3,17 12,96 3,53 3,18 13,32 3,74 3,21 13,99 4,06 3,24 15,04 4,65 3,31 16,88 5,05 3,36 18,02
3,35 3,30 12,17 3,45 3,31 12,52 3,66 3,34 13,18 3,99 3,37 14,20 4,58 3,45 15,95 4,98 3,49 17,09
3,27 3,44 11,40 3,37 3,46 11,71 3,59 3,48 12,38 3,91 3,51 13,37 4,51 3,59 15,07 4,90 3,64 16,18
3,19 3,59 10,65 3,29 3,60 10,98 3,50 3,63 11,59 3,83 3,66 12,55 4,42 3,74 14,19 4,82 3,78 15,27
3,10 3,74 9,93 3,20 3,76 10,23 3,41 3,78 10,83 3,74 3,82 11,74 4,33 3,89 13,37 4,73 3,93 14,42
3,05 3,82 9,58 3,15 3,83 9,88 3,69 3,90 11,38 4,29 3,96 12,98
3,00 3,90 9,24 3,11 3,91 9,54 3,32 3,93 10,12 3,65 3,97 11,02 4,24 4,05 12,57 4,63 4,09 13,58
2,90 4,05 8,59 3,00 4,06 8,87 3,22 4,08 9,45 3,54 4,13 10,29 4,13 4,20 11,82 4,53 4,24 12,81
2,79 4,20 7,97 2,89 4,21 8,24 3,11 4,23 8,80 3,43 4,27 9,65 4,03 4,35 11,12 4,42 4,39 12,08
2,67 4,34 7,39 2,78 4,35 7,65 2,99 4,38 8,19 3,32 4,42 9,01 3,91 4,49 10,46 - - -
2,55 4,47 6,83 2,65 4,49 7,09 2,87 4,51 7,62 3,19 4,55 8,42 - - - - - -
2,41 4,59 6,31 2,52 4,61 6,56 2,73 4,63 7,09 3,06 4,67 7,86 - - - - - -
Pc
Cooling capacity
Pe
Total Input Power
TAE
For intermediate points refer to the diagrams of operating limits.
Cooling capacity correction factor 0,99 1,02 1,03
Input power correction factor 0,99 1,01 1,02
[K*m2]/[W]
Cooling capacity correction factor 0,98 0,94
Input power correction factor 0,98 0,95
EN
11_11. 6755532_02
TAE
7
P
EER
P
EER
P
EER
P
EER
P
EER
P
EER
5,36 6,36 10,11 5,48 6,38 10,32 5,74 6,40 10,77 6,13 6,44 11,43 6,85 6,51 12,62 7,32 6,56 13,39
5,27 5,77 10,96 5,40 5,79 11,19 5,66 5,81 11,68 6,05 5,85 12,41 6,76 5,92 13,70 7,24 5,98 14,53
5,19 5,25 11,87 5,32 5,26 12,13 5,58 5,28 12,66 5,97 5,33 13,45 6,68 5,40 14,85 7,16 5,45 15,75
5,12 4,79 12,81 5,24 4,80 13,10 5,50 4,83 13,66 5,90 4,88 14,51 6,61 4,95 16,02 7,08 5,00 16,99
5,05 4,40 13,77 5,18 4,41 14,07 5,43 4,44 14,69 5,82 4,48 15,61 6,54 4,55 17,24 7,01 4,60 18,27
4,98 4,06 14,71 5,11 4,08 15,03 5,36 4,10 15,69 5,76 4,14 16,67 6,47 4,22 18,41 6,94 4,27 19,52
4,92 3,78 15,60 5,04 3,80 15,94 5,30 3,82 16,65 5,69 3,86 17,70 6,40 3,94 19,49 6,88 3,98 20,71
4,85 3,55 16,39 4,98 3,57 16,75 5,23 3,59 17,50 5,62 3,63 18,61 6,34 3,71 20,49 6,81 3,76 21,71
64,79 3,37 17,05 4,92 3,39 17,42 5,17 3,41 18,20 5,56 3,45 19,35 6,27 3,53 21,30 6,75 3,58 22,65
4,73 3,23 17,54 4,85 3,25 17,92 5,11 3,27 18,73 5,50 3,31 19,92 6,21 3,40 21,94 6,69 3,45 23,26
4,67 3,14 17,82 4,79 3,16 18,22 5,05 3,19 19,00 5,44 3,23 20,21 6,15 3,30 22,34 6,63 3,36 23,70
4,60 3,09 17,88 4,73 3,10 18,29 4,98 3,12 19,14 5,38 3,18 20,31 6,09 3,25 22,47 6,56 3,30 23,84
4,54 3,07 17,73 4,67 3,08 18,16 4,92 3,11 18,95 5,31 3,16 20,20 6,02 3,23 22,38 6,50 3,28 23,76
4,47 3,09 17,39 4,60 3,10 17,79 4,85 3,12 18,64 5,25 3,17 19,89 5,96 3,25 21,99 6,43 3,30 23,36
4,41 3,13 16,88 4,53 3,15 17,29 4,79 3,18 18,09 5,18 3,22 19,31 5,89 3,29 21,46 6,37 3,34 22,84
4,34 3,21 16,23 4,46 3,22 16,64 4,72 3,25 17,41 5,11 3,29 18,63 5,82 3,37 20,75 6,29 3,42 22,09
4,26 3,30 15,49 4,39 3,31 15,89 4,64 3,34 16,66 5,04 3,39 17,84 5,74 3,46 19,92 6,22 3,52 21,18
4,18 3,42 14,69 4,31 3,43 15,09 4,57 3,46 15,83 4,96 3,50 17,00 5,67 3,59 18,97 6,14 3,64 20,26
4,10 3,55 13,86 4,23 3,57 14,24 4,48 3,60 14,96 4,87 3,64 16,08 5,58 3,71 18,05 6,06 3,77 19,27
4,01 3,70 13,02 4,14 3,71 13,39 4,39 3,74 14,09 4,79 3,79 15,18 5,50 3,87 17,05 5,97 3,92 18,27
3,92 3,86 12,19 4,05 3,88 12,52 4,30 3,90 13,23 4,70 3,94 14,29 5,41 4,03 16,11 5,88 4,08 17,30
3,82 4,03 11,39 3,95 4,04 11,74 4,20 4,07 12,40 4,60 4,11 13,42 5,30 4,19 15,17 5,78 4,25 16,33
3,71 4,20 10,62 3,84 4,22 10,94 4,10 4,25 11,57 4,49 4,29 12,56 5,20 4,36 14,30 5,67 4,41 15,41
3,66 4,29 10,24 3,78 4,30 10,56 4,43 4,37 12,16 5,14 4,45 13,88
3,60 4,37 9,88 3,73 4,38 10,20 3,98 4,41 10,82 4,37 4,46 11,78 5,08 4,54 13,44 5,56 4,59 14,52
3,48 4,54 9,18 3,60 4,56 9,48 3,86 4,58 10,11 4,25 4,63 11,01 4,96 4,71 12,64 5,43 4,76 13,70
3,35 4,71 8,52 3,47 4,73 8,81 3,73 4,75 9,41 4,12 4,79 10,32 4,83 4,88 11,89 5,30 4,93 12,91
3,21 4,87 7,90 3,33 4,89 8,18 3,59 4,92 8,76 3,98 4,96 9,63 4,69 5,03 11,18 - - -
3,06 5,02 7,31 3,18 5,03 7,58 3,44 5,06 8,15 3,83 5,11 9,00 - - - - - -
2,90 5,15 6,74 3,02 5,17 7,02 3,28 5,19 7,58 3,67 5,24 8,40 - - - - - -
For intermediate points refer to the diagrams of operating limits.
Pc
Cooling capacity
Pe
Total Input Power
TAE
Cooling capacity correction factor 0,99 1,02 1,03
Input power correction factor 0,99 1,01 1,02
[K*m2]/[W]
Cooling capacity correction factor 0,98 0,94
Input power correction factor 0,98 0,95
This manual suits for next models
8
Table of contents
Other AERMEC Heat Pump manuals
AERMEC
AERMEC VENICE Series Instruction Manual
AERMEC
AERMEC WWM Series Manual
AERMEC
AERMEC NRL 080 User manual
AERMEC
AERMEC ANL Series User manual
AERMEC
AERMEC NRL 280-75 User manual
AERMEC
AERMEC NRK 0150-0700 User manual
AERMEC
AERMEC NXW 0500-1650 User manual
AERMEC
AERMEC WRL 200H User manual
AERMEC
AERMEC ANK 020-085 H User manual
AERMEC
AERMEC NRA-C User manual
AERMEC
AERMEC AN R407C Installation and operation manual
AERMEC
AERMEC CR Series Manual
AERMEC
AERMEC ANKI 020 User manual
AERMEC
AERMEC ANZ 020 User manual
AERMEC
AERMEC ANL 100HA Technical document
AERMEC
AERMEC NRK 0700 User manual
AERMEC
AERMEC NRP 0280 User manual
AERMEC
AERMEC NXW 0500 User manual
AERMEC
AERMEC NRGI User manual
AERMEC
AERMEC WRK0300H User manual
Popular Heat Pump manuals by other brands
Panasonic
Panasonic S-22MU1E51 Technical data
Wellness
Wellness NE100 User and service manual
Airwell
Airwell XLM9 Installation and maintenance manual
Alto
Alto WHP-W05/RM Operation manual
Modine Manufacturing
Modine Manufacturing GEO16-501.4 Installation and service manual
Nibe
Nibe F1355 Series Installer manual
Sinclair
Sinclair S-THERM+ SHP-140IRC Operation manual
innovair
innovair Elite EIN13H2V32 manual
Dimplex
Dimplex BWP 20A Installation and operating instructions
MHG Heating
MHG Heating ThermSelect Series Assembly, Commissioning and Maintenance Instructions
LG
LG MULTI V ARNU-GVE Series owner's manual
Daikin
Daikin Super Multi NX FLXS25BAVMB Service Manual Removal Procedure