Aeroflex 8800 Series User manual

Digital Radio
Test System
8800
Operation Manual
EXPORT CONTROL WARNING: This document contains controlled technical data under the
jurisdiction of the Export Administration Regulations (EAR), 15 CFR 730-774. It cannot be
transferred to any foreign third party without the specific prior approval of the U.S. Department of
Commerce, Bureau of Industry and Security (BIS). Violations of these regulations are punishable
by fine, imprisonment, or both.

Subject to Export Control, see Cover Page for details.
OPERATION MANUAL
DIGITAL RADIO TEST SYSTEM
8800
PUBLISHED BY
Aeroflex
COPYRIGHT Aeroflex 2014
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise without the prior permission of the publisher.
Original Printing Jun 2014
10200 West York / Wichita, Kansas 67215 U.S.A. / [phone] / FAX [phone]

Subject to Export Control, see Cover Page for details.
Electromagnetic Compatibility:
For continued EMC compliance, all external cables must be shielded and three meters or less in
length.
Nomenclature Statement:
In this manual, 8800, Test Set or Unit refers to the 8800 Digital Radio Test System.

Subject to Export Control, see Cover Page for details.
THIS PAGE INTENTIONALLY LEFT BLANK.

Subject to Export Control, see Cover Page for details.
SAFETY FIRST: TO ALL OPERATIONS PERSONNEL
REFER ALL SERVICING OF UNIT TO QUALIFIED TECHNICAL PERSONNEL. THIS UNIT CONTAINS NO
OPERATOR SERVICEABLE PARTS.
WARNING: USING THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY THE ACCOMPANYING
DOCUMENTATION MAY IMPAIR THE SAFETY PROTECTION PROVIDED BY THE EQUIPMENT.
CASE, COVER OR PANEL REMOVAL
Opening the Case Assembly exposes the operator to electrical hazards that can result in electrical shock or
equipment damage. Do not operate this Test Set with the Case Assembly open.
SAFETY IDENTIFICATION IN TECHNICAL MANUAL
This manual uses the following terms to draw attention to possible safety hazards, that may exist when
operating or servicing this equipment.
CAUTION: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN
EQUIPMENT OR PROPERTY DAMAGE (E.G., FIRE).
WARNING: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN
PERSONAL INJURY OR DEATH.
SAFETY SYMBOLS IN MANUALS AND ON UNITS
CAUTION: Refer to accompanying documents. (This symbol refers to specific CAUTIONS
represented on the unit and clarified in the text.)
AC OR DC TERMINAL: Terminal that may supply or be supplied with AC or DC voltage.
DC TERMINAL: Terminal that may supply or be supplied with DC voltage.
AC TERMINAL: Terminal that may supply or be supplied with AC or alternating voltage.
EQUIPMENT GROUNDING PRECAUTION
Improper grounding of equipment can result in electrical shock.
USE OF PROBES
Check the specifications for the maximum voltage, current and power ratings of any connector on the Test Set
before connecting it with a probe from a terminal device. Be sure the terminal device performs within these
specifications before using it for measurement, to prevent electrical shock or damage to the equipment.
POWER CORDS
Power cords must not be frayed, broken nor expose bare wiring when operating this equipment.
USE RECOMMENDED FUSES ONLY
Use only fuses specifically recommended for the equipment at the specified current and voltage ratings.
INTENDED USE
The 8800 is intended for indoor use only and should not be subjected to conditions which cause water or other
liquids to collect on the Touch Screen Display.
INTERNAL BATTERY
This unit contains a Lithium Ion Battery, serviceable only by a qualified technician.
CAUTION: SIGNAL GENERATORS CAN BE A SOURCE OF ELECTROMAGNETIC INTERFERENCE (EMI) TO
COMMUNICATION RECEIVERS. SOME TRANSMITTED SIGNALS CAN CAUSE DISRUPTION AND
INTERFERENCE TO COMMUNICATION SERVICES OUT TO A DISTANCE OF SEVERAL MILES.
USERS OF THIS EQUIPMENT SHOULD SCRUTINIZE ANY OPERATION THAT RESULTS IN
RADIATION OF A SIGNAL (DIRECTLY OR INDIRECTLY) AND SHOULD TAKE NECESSARY
PRECAUTIONS TO AVOID POTENTIAL COMMUNICATION INTERFERENCE PROBLEMS.

Subject to Export Control, see Cover Page for details.
THIS PAGE INTENTIONALLY LEFT BLANK.

Subject to Export Control, see Cover Page for details.
DECLARATION OF CONFORMITY
The Declaration of Conformity Certificate included with
the Unit should remain with the Unit.
Aeroflex recommends the operator reproduce a copy of
the Declaration of Conformity Certificate to be stored
with the Operation Manual for future reference.

Subject to Export Control, see Cover Page for details.
THIS PAGE INTENTIONALLY LEFT BLANK.

Subject to Export Control, see Cover Page for details.
RoHs Product Information for People’s Republic of China
Toxic or Hazardous Substance Content Table
The table provided below lists information as required by People’s Republic of China
Electronic Industry Standard SJ/T11364-2006, Marking for Control of Pollution Caused by
Electronic Information Products. The table lists toxic or hazardous substances contained in
Aeroflex products that exceed limits in SJ/T11363-2006
Table 1. Toxic or Hazardous Substances in Product
部件名称
Parts Toxic or Hazardous Substances 有毒有害物质或元素
Lead
(Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium
(Cr6+)
Polybrominated
Biphenyls (PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
铅汞镉六价铬 多溴联苯 多溴二苯醚
印刷板组件
Printed Board
Assemblies
X O O O O O
机箱子组件
Chassis
subassembly
X O O O O O
电源
Power Supply
X O O O O O
电缆及电缆组件
Cables & Cable
Assemblies
X O O O O O
O: Indicates that the toxic or hazardous substance contained in all of the homogenous
materials for this component is below the limit requirement in SJ/T11363-2006
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006
标准规定的限量要求以下
X: Indicates that the toxic or hazardous substance contained in at least one of the
homogeneous materials for this component is above the limit requirement in SJ/T11363-
2006.
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006
标准规定的限量要求

Subject to Export Control, see Cover Page for details.
RoHs Product Information for People’s Republic of China (cont)
Pollution Control Marking
The following marking is located on all Aeroflex products sold in China. The number in the
center indicates the Environmental Protection Use Period. This indicates the period in years
during which the hazardous substances described in Table 1 will not leak or mutate under
normal operating conditions so that the use of the product will not result in any severe
environmental problem, any bodily injury, or damage to assets. The Environmental Protection
Use period is valid only when the product is operated under the conditions defined in the
product manual.

PREFACE
Subject to Export Control, see Cover Page for details. i
SCOPE
This Manual contains Instructions for operating the 8800. It is strongly recommended that the
Operator be thoroughly familiar with this manual before attempting to operate the equipment.
ORGANIZATION
The Manual is composed of the following Chapters:
CHAPTER 1 - INTRODUCTION
Provides an Introduction and a Brief Overview of Functions and Features. Principles of
Operation are also included.
CHAPTER 2 - OPERATING INSTRUCTIONS
Identifies and functionally describes all Controls, Indicators and Connectors.
Provides UI interaction.
Provides a Turn-On Procedure and Initial Adjustments.
Provides Operation Procedures.
Provides Applications.
CHAPTER 3 - OPERATOR MAINTENANCE
Identifies and explains Routine Service, Troubleshooting, Maintenance and Storage
Procedures.

TABLE OF CONTENTS
ii Subject to Export Control, see Cover Page for details.
PARAGRAPH PAGE
CHAPTER 1 - INTRODUCTION
1-1 General Information ..................................................................................... 1-1
1-1A Scope .................................................................................................... 1-1
1-1B Nomenclature Cross-Reference List........................................................... 1-1
1-2 Equipment Capabilities and Features............................................................. 1-2
1-2A Capabilities ............................................................................................ 1-2
1-2B Features................................................................................................. 1-3
1-3 Equipment Data........................................................................................... 1-5
1-4 Principles of Operation................................................................................. 1-19
CHAPTER 2 - OPERATING INSTRUCTIONS
2-1 Operator’s Controls, Indicators and Connectors .............................................. 2-1
2-2 Functions and Tiles ..................................................................................... 2-5
2-2-1 System Icons .......................................................................................... 2-7
2-2-2 Touch Screen.......................................................................................... 2-10
2-2-3 User Interface (UI) Components ................................................................ 2-11
2-2-3A Launch Bar......................................................................................... 2-11
2-2-3B Function Icons .................................................................................... 2-12
2-2-3C Tile Windows ...................................................................................... 2-13
2-2-3D Defining Parameters ............................................................................ 2-16
2-2-3E Dropdown Menus................................................................................. 2-20
2-2-3F Message Windows ............................................................................... 2-22
2-2-4 System Menu .......................................................................................... 2-23
2-2-5 Suspend (Sleep) Mode............................................................................. 2-24
2-2-6 Multi-Language Support ........................................................................... 2-26
2-3 Preventive Maintenance Checks and Services................................................. 2-28
2-3-1 General.................................................................................................. 2-28
2-3-2 Preventive Maintenance Procedures .......................................................... 2-28
2-3-2A Tools, Materials and Equipment Required .............................................. 2-28
2-3-2B Routine Checks................................................................................... 2-28
2-3-2C Schedule of Checks............................................................................. 2-28
2-4 Operation Under Usual Conditions................................................................. 2-29
2-4-1 Turn-On Procedure .................................................................................. 2-29
2-4-2 Install/Remove License ............................................................................ 2-30
2-4-3 Install Software....................................................................................... 2-34
2-4-4 Save/Recall Function Windows.................................................................. 2-37
2-4-5 Snapshot................................................................................................ 2-38
2-4-6 Clone Unit .............................................................................................. 2-41
2-5 Basic Setups............................................................................................... 2-42
2-5-1 Analog Demod......................................................................................... 2-42
2-5-2 Analog SINAD ......................................................................................... 2-44
2-5-3 Digital DMR ............................................................................................ 2-46

Subject to Export Control, see Cover Page for details. iii
PARAGRAPH PAGE
CHAPTER 3 - MAINTENANCE
3-1 Service Upon Receipt................................................................................... 3-1
3-1-1 Service Upon Receipt of Material .............................................................. 3-1
3-1-1A Unpacking .......................................................................................... 3-1
3-1-1B Checking Unpacked Equipment ............................................................. 3-2
3-1-2 Preliminary Servicing and Adjustment of Equipment .................................... 3-3
3-2 Self Test..................................................................................................... 3-4
3-3 Troubleshooting .......................................................................................... 3-5
3-4 Maintenance Procedures .............................................................................. 3-9
3-4-1 Battery Recharging.................................................................................. 3-9
3-4-2 Battery Replacement................................................................................ 3-10
3-4-3 Fuse Replacement................................................................................... 3-11
3-4-4 DMM Fuse Replacement........................................................................... 3-12
3-4-5 Feet Replacement.................................................................................... 3-13
3-5 Preparation for Storage or Shipment.............................................................. 3-14
3-5A Packaging ............................................................................................. 3-14
3-5B Environment............................................................................................ 3-14
APPENDICES
A Connector Pin-Out Tables............................................................................. A-1
A-1 I/O Connectors........................................................................................ A-1
A-2 MIC Connector Pin-Out Table.................................................................... A-3
A-3 REMOTE Connector Pin-Out Table ............................................................ A-4
A-4 ETHERNET Connector Pin-Out Table......................................................... A-5
A-5 USB Connector Pin-Out Table................................................................... A-6
B Abbreviations ............................................................................................. B-1
INDEX

LIST OF ILLUSTRATIONS / TABLES
iv Subject to Export Control, see Cover Page for details.
LIST OF TABLES
TITLE PAGE
I/O Connectors (Front Panel) A-1
I/O Connectors (Rear Panel) A-2
MIC Connector Pin-Out Table A-3
REMOTE Connector Pin-Out Table A-4
ETHERNET Connector Pin-Out Table A-5
USB Connector Pin-Out Table A-6

SERVICE UPON RECEIPT OF MATERIAL
Subject to Export Control, see Cover Page for details. v
Unpacking
Special-design packing material inside the shipping container provides maximum protection for the
8800. Avoid damaging the shipping container and packing material during equipment unpacking.
Use the following steps for unpacking the 8800.
l Cut and remove the sealing tape on top of the shipping container and open the shipping
container.
l Remove the top packing mold.
l Remove 8800 and packing material from the bottom packing mold.
l Remove the protective plastic bag from the 8800 and inspect the contents.
l Place the protective plastic bag and packing material inside the shipping container.
l Store the shipping container for future use should the 8800 need to be returned/shipped.
Checking Unpacked Equipment
Use the following steps for checking the equipment.
l Inspect the equipment for damage incurred during shipment. If the equipment has been
damaged, report the damage to Aeroflex Customer Service.
l Review the packing slip to verify the shipment is complete. The packing slip identifies the
standard items as well as the purchased Options. Report all discrepancies to Aeroflex.
CONTACT: Aeroflex
Telephone: [phone] (U.S. only)
[phone]
FAX: [phone]
E-Mail: [email protected]

vi Subject to Export Control, see Cover Page for details.
Checking Unpacked Equipment (cont)
STANDARD ITEMS
DESCRIPTION PART NUMBER QTY
8800 Digital Radio Test System 112581 1
External DC Power Supply 67374 1
Fuse, Spare (5 A, 32 Vdc, Mini-Blade) 56080 2
Manual, Getting Started (Paper) (English) 113615 1
Manual, Operation (CD) (English) 113613 1
Power Cable (AC) (China) 91803 1
Power Cable (AC) (Continental Europe) 27480 1
Power Cable (AC) (North America) 27478 1
Power Cable (AC) (UK) 27477 1

Subject to Export Control, see Cover Page for details. vii
Checking Unpacked Equipment (cont)
STANDARD ITEMS
8800
112581
External DC Power Supply
67374
Fuse, Spare (5 A, 32 Vdc, Mini-Blade)
56080
Power Cable (AC) (China)
91803
Power Cable (AC) (Continental Europe)
27480
Power Cable (AC) (North America)
27478
8800
Digital Radio Test System
Getting Started Manual
EXPORT CONTROLWARNING: This document contains controlled technical data under the jurisdiction
of the Export Adminis tration Regulations (EAR), 15 CFR 730-774. It cannot be transferred to any foreign
third party without the spec ific prior approval of the U.S. Depa rtment of Commerce, Bureau of Ind ustry
and Security (BIS). Violations of these regulations are punishable by fine, imprisonment, or both.
Power Cable (AC) (UK)
27477
Manual, Getting Started (Paper) (English)
113615

viii Subject to Export Control, see Cover Page for details.
Checking Unpacked Equipment (cont)
STANDARD ITEMS
Manual, Operation (CD) (English)
113613

Subject to Export Control, see Cover Page for details. ix
Checking Unpacked Equipment (cont)
OPTIONAL ITEMS
(These optional items may be included if ordered)
DESCRIPTION PART NUMBER QTY
Manual, Getting Started (Paper)
Arabic
Chinese - Simplified
Chinese - Traditional
French
German
Japanese
Korean
Malay
Polish
Portuguese
Russian
Spanish
113699 1
Manual, Maintenance (CD) (English) 113614 1
Manual, Operation (CD)
Arabic
Chinese - Simplified
Chinese - Traditional
French
German
Japanese
Korean
Malay
Polish
Portuguese
Russian
Spanish
113698 1

x Subject to Export Control, see Cover Page for details.
Checking Unpacked Equipment (cont)
OPTIONAL ITEMS
Manual, Getting Started (Paper)
(Arabic)
(Chinese - Simplified) 113699
(Chinese - Traditional)
(French)
(German)
(Japanese)
(Korean)
(Malay)
(Polish)
(Portuguese)
(Russian)
(Spanish)
Manual, Maintenance (CD) (English)
113614
Manual, Operation (CD)
(Arabic)
(Chinese - Simplified) 113698
(Chinese - Traditional)
(French)
(German)
(Japanese)
(Korean)
(Malay)
(Polish)
(Portuguese)
(Russian)
(Spanish)