Whakin AH-01 User manual
SUCTION CUP
Model：AH-01
-Wireless Charging Suction Cup Mount
-Dual Port Quick Charge Car Charger（Optional）
-1m Type-C to USB-A Sync & Charge Cable
-Wireless Charging Suction Cup Mount
AH-01
1.Close Button
2.Locking Side Arms
3.Locking Side Arms
4.Coil
5.Tray
6.Tray
7.Indicator
8.Stabilizing Nut
9.Motor
10.Open Button
11.Open Button
12.Type- C Charging Port
13.Ball Joint
14.Stabilizing Nut
15.Suction Lock
16.Suction Cup
17.Car Charger/Indicator
（Green：Fast Charging;Blue:Standard Charging）
18.USB A Output:Quick Charge 3.6V-6.5V/3A,6.5V-9V/2A,9V-12V/1.5A(Green)
19.USB A Output：5V/2.4A(White)
20.Type-C Cable
Optional
What is included?
Wireless Charging Suction Cup Mount LED Indicator/Status
1
3
5
7
2
4
6
8
9
10 11
12
13
14
15
16
17
18
19
20
Charging Indicators
Turns blue for 10 seconds,
then turns o
Turns on solid blue
Blue indicator turns o
Flashes red
Working Status
Standby
Charging a compatible device
Device fully charged
FOD (Foreign Object Damage)
alarm
1.Connect the Type-C cable into the charging port.
2.Insert the USB connector into a car charger.
3.Position your phone so that the arm automatically clamps the phone by
generating electromagnetic induction.
1.Loosen the stabilizing nut,insert the ball joint,and then tighten the nut to lock
in place.
3.Press the open button to open the locking side arms.
5.Rotate the ball joint to obtain your best viewing angle.
4.Place your phone when your phone start charging,the arms clamp your phone
automatically.
2.Place the suction cup mount on the dashboard or windshield,and then press
down the suction lock.
