AFi Atlantic TWIN User manual

ASSEMBLY INSTRUCTIONS
TWIN
Before assembling your bed frame, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Barrel nut - 2 pcs
JCB M8 X 15mm ( 5/8") - 4 pcs
JCB M6 X 110mm (4 3/8”) - 2 pcs Wood screw(1 1/4”) - 24 pcs
Spare - 1 pc Spare - 2 pcs
OPEN BED FRAME
Page 1 of 2
PARTS LIST HARDWARE
FOOT RAIL 1 PC
AD
E
F
B
C
1 PC
1 PC
2 PCS
2 SETS
LEFT LEG
RIGHT LEG
SIDE RAIL
SLAT KIT
1
2
3
4
5
Allen wrench M4 - 1pc
Allen wrench M6 - 1pc
Spare - 1pc
4
4
1
1
2
3
B
B
A
A
B
C
C
C
C
A
Attach the legs (2) and (3)
to foot rail (1), using
JCB M6 X 110mm (A) and
barrel nut (B).
Tighten with the Allen wrench M4 (F).
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Attach side rails (4) to the foot rail (1) as shown below using JCB M8 X 15mm (C).
Tighten with Allen wrench M6 (E).
Step 1
Step 2
READY
ASSEMBLE
TO
PO:
Adult assembly
JCB M6 X 110mm
Barrel nut
JCB M8 X 15mm

TWIN
OPEN BED FRAME
READY
ASSEMBLE
TO
Page 2 of 2
Attach open bed frame to the headboard as shown below
using 4 JCB M8 X 15mm bolts that are supplied with your
headboard. Tighten with the Allen wrench M6 (E).
Attach 2 slat kit (5) to the open bed as shown below using wood screws 1 1/4" (D). Tighten with Phillips head
screw driver. (customer supplied)
Step 3
Step 4
D
Congratulations!
Your bed is now ready for use.
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
D
Wood screw 1 1/4"
JCB M8 X 15mm
5
5
C

Before assembling your bed drawer, please read through these
instructions carefully, familiarize yourself with the different parts.
BED DRAWER
Page 1 of 2
HARDWARE
A B C
JCB M6 X 1”( 25mm ) - 8 pcs Wood Screw X 1 1/4”( 32mm ) - 2 pcs
Spare - 1 pc Spare - 1 pc
E
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
Adult assembly
Adult assembly
PARTS LIST
01
02
03
HARDWARE 1 BOX
1 PC
2 PCS
DRAWER FACE
DRAWER SIDE
04
05
06
07
1 PC
2 PCS
1 PC
1 PC
DRAWER BACK
DRAWER BOTTOM
DRAWER MIDDLE
DRAWER CENTER SUPPORT
01
04
02
03
03
05
05
06
07
Step 1
Lay the drawer face (02) on smooth, flat surface so the drawer bottom (05) groove is facing upwards.
Attach the drawer sides (03) to drawer face (02) using JCB M6 X 1” (A). Align groove inside drawer
side with groove in drawer face. Tighten with Allen wrench (C).
A
C
JCB M6 X 1”
Allen wrench
03
03
02
A
AGROOVE

Page 2 of 2
05
05
06
06
07
07
05
05
Guide the drawer bottoms (05) and drawer middle (06) in carefully so that they align inside grooves. Be sure
it fits fully into the face and side groove before attaching the drawer back (04).
Attach drawer center support (07) to bottom of drawer face using wood screw 1 1/4" (B). Tighten with
Phillips head screw driver. (Customer supplied)
Attach drawer back (04) to bed drawer
assembly as shown. Use JCB M6 X 1”(A).
Tighten with Allen wrench (C). Use wood
screws 1 1/4" (B) to finish attaching drawer
center support (07) to drawer back (04)
Tighten with Phillips head screw driver.
(customer supplied)
Lastly, insert bed drawer to the bed as
shown below.
Step 2
Step 3 Step 4
Congratulations!
Your bed drawer is now ready for use.
BED DRAWER
A
B
A
04
BACK VIEW
B
B
Adult assembly
Adult assembly
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
A
B
C
JCB M6 X 1”
Wood Screw 1 1/4"
Allen wrench
B
Wood Screw 1 1/4"