AFi MURPHY MB-PD-SAN User manual

READY
ASSEMBLY INSTRUCTIONS
TWIN
PO :
MURPHY BED
Before assembling your murphy bed, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
Adult assembly
Phillips screwdriver
Customer supplied
CODE ITEM
MB-PD-SAN
MB-BL-SAN
C-7721X
C-7722X
Page 1 of 7
AB
E
CD
I
FJ
K
G
JCB M6 X 30mm (1 1/4”) - 8 pcs JCB M6 X 55mm (2 1/8”) - 2 pcs
Spare - 1 pc Spare - 1 pc
Hexagon Nut - 8 pcs
Wood screw 1” - 17 pcs Flat Washer - 8 pcs Spare - 1 pc
Spare - 2 pcs Spare - 2 pcs
Triangle Bracket - 2 pcs
Barrel Nut - 2 pcs Surface Mount Charger 2 - 1 set
Screw 1/2" - 2 pcs
Spare - 1 pc
Allen wrench - 1 pc
Hexagon wrench - 1 pc
Spare - 1 pc
HARDWARE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
HSpring clip set with screw - 2 pcs

03
01
02
04
05
06
07
08
09
10
11
LEFT SIDE PANEL
HARDWARE
SMC2
RIGHT SIDE PANEL
BASE
LEG
FOLDING PANEL
BACK RAIL
BACK PANEL
TOP PANEL
FOLDING MATTRESS
01
02
09
03
04
07
10
11
03
05
04
08
08
05
06
06
06
06
Page 2 of 7
1 BOX C-7722X
1 BOX C-7721X
1 BOX
A
A
A
PARTS LIST
STEP 1
TWIN
Install spring clip (H) set with screw to side panels (03)(04). Attach left side panel (03)
and right side panel (04) to the base (05) as shown below.
Use JCB (A).Tighten with Allen wrench (K)
JCB M6 X 30mm
FOLLOW PILOT HOLES
A
Adult assembly
Spring Clip
Allen wrench
H
K
04
H

Page 3 of 7
JCB
B
Adult assembly
STEP 2
STEP 3
Barrel nut
Allen wrench
F
K
Guide the back panel (08) and back rail (07) in carefully so that it won’t jump out of
its grooves. Be sure it fits fully into its groove at the back rail before fitting the top
panel. Use JCB (B) and barrel nut (F). Tighten with allen wrench (K).
08
08
07
B
B
F
F
A
A
A
Attach top panel (09) to cabinet assembly as shown below. Use JCB (A).
Tighten with Allen wrench (K)
09
JCB M6 X 30mm
A
Adult assembly
Allen wrench
K
TWIN
BOTTOM VIEW

STEP 4
Attach legs (06) to cabinet assembly as shown below. Use flat washer (D) and
hexagon nut (E).Tighten with Hexagon wrench (G)
Adult assembly
Hexagon Nut
Flat Washer
Hexagon Wrench
E
D
G
06
06
06
06
06
DE
TWIN
Page 4 of 7
STEP 5
Open top drawer folding leg as shown below. Using metal support and lock to the
post.(both side)
Top drawer folding leg
LOCK
Adult assembly

Page 5 of 7
STEP 6
Attach folding panel assembly (10) to cabinet assembly as shown below. Use wood
screw (C). Tighten with Phillips head screwdriver. Customer supplied.
Be sure to align with cabinet.
C
10
C
C
C
C
Adult assembly
Phillips screwdriver
Customer supplied
Wood Screw 1"
TWIN
STEP 7
Adult assembly
Unlock metal support. Lift the door and latch to side panel. Push the door closed and
latch both sides as shown below.
Lock
UNLOCK BOTH SIDE

STEP 8
STEP 9
Attach triangle bracket (I) to the back of cabinet as shown below. Use wood screw (C)
tighten with Phillips head screwdriver. (customer supplied).
Install USB charger (J) to the location
as shown. Using 1/2" screws and tighten
with Phillips head screwdriver.
(Customer supplied )
C
C
C
I
I
Phillips screwdriver
Customer supplied
I
PILOT HOLES
J
J
Triangle bracket
Wood Screw 1”
SMC 2
I
C
J
Adult assembly
TWIN
Page 6 of 7
STEP 10
Adult assembly
Unlatch the door and open, folding down and lock metal support to the post as shown.
Open
LOCK BOTH SIDE
Lock

STEP 11
TWIN
Page 7 of 7
STEP 12
Adult assembly
Adult assembly
Open and pull footboard frame and open footboard leg as shown below.
FOOTBOARD FRAME
FOOTBOARD LEG
Install folding mattress (11) to the bed. Open top panel as shown below.
11
11
Congratulations!
Your Murphy bed is now ready for use.
We recommend that you recheck that all screws are tight,
and that all parts are secure before use to ensure lasting Safety.