AFi HB-POR User manual

ASSEMBLY INSTRUCTIONS
Before assembling your headboard, please read through these
instructions carefully and familiarize yourself with the different parts.
HEADBOARD
Page 1 of 2
BACK VIEW
Step 1
Step 2
1
1
6
6
2
5
3
B
B
B
B
B
C
C
C
C
Instructions apply for bed sizes
QUEEN > KING
PARTS LIST HARDWARE
JCB M6 X 70mm (2 3/4”) - 4 pcs
Spare - 1 pc
B
A
C
D
H
HEADBOARD PANEL 1 PC
1
2
3
5
6
4
1 PC
1 PC
1 PC
2 PCS
2 PCS
LEFT LEG
RIGHT LEG
PILLOW STOP
PACKING STICK
SPACER BLOCK
Allen wrench - 1pc
Spare - 1pc
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
Barrel nut - 4 pcs
Wooden dowel - 8 pcs
Wood screw - 4 pcs
Spare - 1 pc
Spare - 2 pcs
Spare - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
READY
ASSEMBLE
TO
Attach the legs (2) and (3) to the headboard panel (1) and pillow stop (5),
using JCB (B) and barrel nut (C). Tighten with the Allen wrench (H).
5
4
4
4
2
3
D
D
A
A
PO :
Remove packing stick (6) from headboard panel (1) and . Insert wooden dowels (A) to the
locator holes on spacer block (4) and pillow stop (5). Attach the spacer blocks (4) to the legs (2) and
(3), using wood screws (D), as shown below. Tighten with Phillips screwdriver. (customer supplied)
DISCARD
Adult assembly
If you purchased a wood headboard to attach to metal bed frame, please refer to page 2.
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
G
F
E
CODE ITEM ITEM
HB-POR
R-28984X R-28985X

ASSEMBLY INSTRUCTIONS
Before assembling your bed frame, please read through these
instructions carefully and familiarize yourself with the different parts.
Wood button - 2 pcs
Spare - 1 pc
Barrel nut - 2 pcs
JCB M6 X 100mm (4”) - 2 pcs
Wooden dowels - 4 pcs
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Page 1 of 1
Instructions apply for all bed sizes
Twin > Twin XL > Full > Queen > King
PARTS LIST HARDWARE
END RAIL 1 PC
b
ad
c
2 PCS
2 PCS
2 PCS
TALL LEG
SHORT LEG
SIDE RAIL
1
2
3
4
Allen wrench - 1pc
Spare - 1pc
e
1
4
4
2
1
3
b
b
c
c
d
d
a
Attach the legs (2) or (3) to end rail (1),
using JCB M6 X 100mm (b) and barrel nut (c).
Tighten with the Allen wrench (e).
Cover holes with wood button (d).
Insert wooden dowels (a) into the
locator holes on (1) both ends
of end rail.
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Attach side rails (4) to the end rail using bed hook
as shown. For headboard assembly, follow assembly
instructions included with headboard.
Short leg
Tall leg
Choose the when using
storage drawers, Trundle bed or
mattress only, choose the
tall legs
short
legs if using both foundation and
mattress.
OR
Step 1
Step 2
Step 3
READY
ASSEMBLE
TO
PO:
Adult assembly
BED FRAME
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishigs at [email protected] or 1-800-955-3726
ITEMCODE
FR-UBN
FR-UBN
FR-UBN
FR-UBN
FR-UBN
R-26311X
R-26321X
R-26331X
R-26341X
R-26351X

02
A
A
E
E
F
F
H
ASSEMBLY INSTRUCTION
( QUEEN )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST
H
Please note that you will require a Phillips screwdriver and an Allen wrench.
Allen wrench
Assemble support leg (03 / 04) and support rail (02).
Assemble bed frame according to assembly instructions.
If using mattress and foundation set the bed up low and use short support leg.
If using Storage Drawers or Trundle Bed choose the tall support leg.
Using JCB(A) split and flat washer (E)(F).
Tighten with the Allen wrench M6 (H).
Repeat for other support rail.
Page 1 of 2
03 / 04
03 / 04
HARDWARE
A
B
C
EF
DG
H
1 5/8” JCB M8 - 4 pcs
1 3/8” JCB M6 - 6 pcs
Cap Nut - 6 pcs
Split Washer - 4 pcs Flat Washer - 4 pcs
Spare - 1 pc
Spare - 1 pc
1 1/4” Wood screw - 12 pcs
Spare - 1 pc
Spare - 1 pc Spare - 1 pc
Allen wrench M4 - 1 pc
Allen wrench M6 - 1 pc
Spare - 1 pc
01
02
03
03
SLAT KIT
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
A
1 5/8” JCB M8
READY
ASSEMBLE
TO
PO :
Adult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Step 1
Step 2
04
04
03
SLAT SECTION
SUPPORT RAIL
2 SET
2 PCS
4 PCS
01
02
03
SHORT SUPPORT LEG 4 PCS
04
TALL SUPPORT LEG
CODE ITEM
SL-PF E-65403

Page 2 of 2
Attach support rail(02)to slat section(01).
Using JCB (B) and cap nut (C) tighten
with the Allen wrench (G).
Repeat for section 2.
Lay the slat section (01) onto the bed.
Screw slat section (01) to side rail,
using wood screw (D). Tighten with
Phillips screwdriver. (Customer supplied)
Be sure the space between slats is even.
D
B
B
B
C
C
C
01
01
D
1 1/4” Wood screw
SECTION 1
SECTION 2
Phillips screwdriver
Customer supplied
If using a Trundle Bed attach center rail off center
as shown. Repeat for section 2.
SECTION 1
Be sure to align slat section evenly
with both ends of side rail.
02
D
B
B
C
B
1 3/8” JCB M6
CG
Cap nut Allen wrench
Adult assembly
Adult assembly
Step 3
Step 4
( QUEEN )