AG Neovo PO-55F User manual

PO-55F & PO-55H LED-Backlit Display
User Manualdisplays.agneovo.com

TABLE OF CONTENTS
SAFETY INFORMATION .............................................................................. 1
CE Declaration of Conformity...................................................................................................................1
Polish Center for Testing and Certication Notice ....................................................................................1
Electric, Magnetic and Electromagnetic Fields (“EMF”)...........................................................................2
Information for U.K. only...........................................................................................................................2
North Europe (Nordic Countries) Information...........................................................................................4
End-of-Life Disposal .................................................................................................................................4
Waste Electrical and Electronie Equipment-WEEE..................................................................................4
Turkey RoHS............................................................................................................................................5
Ukraine RoHS ..........................................................................................................................................5
PRECAUTIONS ............................................................................................ 6
Cautions When Setting Up .......................................................................................................................6
Cautions When Using...............................................................................................................................7
Cleaning and Maintenance.......................................................................................................................7
Notice for the LCD Display .......................................................................................................................8
CHAPTER 1: PRODUCT DESCRIPTION..................................................... 9
1.1 Package Contents ..............................................................................................................................9
1.2 Preparing for the Installation ..............................................................................................................10
1.3 Moving the Display .............................................................................................................................10
1.3.1 Unpacking the Display.............................................................................................................10
1.3.2 Carrying the Display ................................................................................................................11
1.3.3 Setting Down the Display ........................................................................................................11
1.3.4 Placing the Display..................................................................................................................11
1.4 Wall Mounting Installation...................................................................................................................12
1.4.1 VESA Grid ...............................................................................................................................12
1.4.2 Ventilation Requirements for Enclosure Locating....................................................................13
1.5 Mounting in Portrait Position ..............................................................................................................13
1.6 LCD Display Overview .......................................................................................................................14
1.6.1 Control Panel...........................................................................................................................14
1.6.2 Input/Output Terminals ............................................................................................................16
1.7 Remote Control ..................................................................................................................................18
1.7.1 General Functions ...................................................................................................................18
1.7.2 Inserting the Batteries in the Remote Control .........................................................................19
1.7.3 Handling the Remote Control ..................................................................................................19
1.7.4 Operating Range of the Remote Control.................................................................................19
CHAPTER 2: MAKING CONNECTIONS...................................................... 20
2.1 Connecting the Power ........................................................................................................................20
2.2 Connecting a Computer .....................................................................................................................21
2.2.1 Using D-SUB Input .................................................................................................................21
2.2.2 Using HDMI Input ....................................................................................................................21
2.2.3 Using DVI Input .......................................................................................................................22
2.2.4 Using RS232 Input ..................................................................................................................22
2.2.5 Using DP Input ........................................................................................................................23

TABLE OF CONTENTS
2.3 Connecting External Equipment (Video Player) .................................................................................23
2.3.1 Using HDMI Video Input .........................................................................................................23
2.3.2 Using DP Video Input .............................................................................................................24
2.4 Connecting Audio Equipment.............................................................................................................24
2.4.1 Connecting an External Audio Device.....................................................................................24
CHAPTER 3: USING THE LCD DISPLAY .................................................... 25
3.1 Turning on the Power .........................................................................................................................25
3.2 Selecting the Input Source Signal ......................................................................................................25
3.3 Adjusting the Volume..........................................................................................................................26
3.4 Setting Up the IR Sensor....................................................................................................................27
CHAPTER 4: ON SCREEN DISPLAY MENU............................................... 28
4.1 Using the OSD Menu .........................................................................................................................28
4.2 OSD Menu Tree .................................................................................................................................29
CHAPTER 5: ADJ USTING THE LCD DISPLAY .......................................... 30
5.1 Luminance..........................................................................................................................................30
5.2 Picture ................................................................................................................................................31
5.3 Color...................................................................................................................................................32
5.4 OSD Settings......................................................................................................................................33
5.5 Setup ..................................................................................................................................................34
CHAPTER 6: APPENDIX.............................................................................. 35
6.1 Warning Messages.............................................................................................................................35
6.2 Supported Resolution.........................................................................................................................35
6.3 Cleaning.............................................................................................................................................37
6.4 Troubleshooting..................................................................................................................................38
6.5 Transporting the LCD Display ............................................................................................................39
CHAPTER 7: SPECIFICATIONS.................................................................. 40
7.1 Display Specications ........................................................................................................................40
7.2 Display Dimensions............................................................................................................................41
7.2.1 PO-55F Dimensions ................................................................................................................41
7.2.2 PO-55H Dimensions................................................................................................................41

1
SAFETY INFORMATION
CE Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws
of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/
EU), RoHS directive (2011/65/EU).
This product has been tested and found to comply with the harmonized standards for Information Technology
Equipment these harmonied standards published under Directives of Ofcial ournal of the European Union.
Polis ente o estin an etication Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket).
All equipment that works together (computer, display, printer, and so on) should have the same power supply
source.
The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device
in the form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply
socket, which should be located near the equipment and easily accessible.
A protection mark B conrms that the equipment is in compliance with the protection usage requirements of
standards PN-93/T-42107 and PN-89/E-06251.

2
SAFETY INFORMATION
Electric, Magnetic and Electromagnetic Fields
(“EMF”)
• We manufacture and sell many products targeted at consumers,
which, like any electronic apparatus, in general have the ability to
emit and receive electromagnetic signals.
• One of our leading Business Principles is to take all necessary
health and safety measures for our products, to comply with all
applicable legal requirements and to stay well within the EMF
standards applicable at the time of producing the products.
• We are committed to develop, produce and market products that
cause no adverse health effects.
• We conrm that if its products are handled properly for their
intended use they are safe to use according to scientic evidence
available today.
• We play an active role in the development of international
EMF and safety standards, enabling us to anticipate further
developments in standardization for early integration in its
products.
Information for U.K. only
WARNING - THISAPPLIANCE MUST BE EARTHED.
(A)
(B)
Important:
This apparatus is supplied with an approved moulded 13A plug. To
change a fuse in this type of plug proceed as follows:
1Remove fuse cover and fuse.
2Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI
approved type.
3Ret the fuse cover.
Note:
The severed plug must be
destroyed to avoid a possible shock
hazard should it be inserted into a
13A socket elsewhere.

3
SAFETY INFORMATION
If the tted plug is not suitable for your socket outlets it should be cut off and an appropriate 3-pin plug tted
in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at
the distribution board should not be greater than 5A.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN & YELLOW - “EARTH” (“E”)
• The GREEN & YELLOW wire must be connected to the terminal in the plug which is marked with the letter
“E” or by the Earth symbol or coloured GREEN or GREEN & YELLOW.
• The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
• The BROWN wire must be connected to the terminal which marked with the letter “L” or coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not
simply over the three wires.

4
SAFETY INFORMATION
Not ope Noic onties nomation
Placering/Ventilation
ANNG: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU
STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADAS: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT
TILGÆNGELIGE.
Paikka/Ilmankierto
AOS: SIOITA LAITE SITEN ETT VEROOHTO VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADAS: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE
FOR STØMTILFØRSEL ER LETTE Å NÅ.
End-of-Life Disposal
Your new Public Information Display contains materials that can be recycled and reused. Specialized
companies can recycle your product to increase the amount of reusable materials and to minimize the amount
to be disposed of.
Please nd out about the local regulations on how to dispose of your old display from your local dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.
For additional information on recycling contact www.eia.org (Consumer Education Initiative).
Waste Electrical and Electronie Equipment-WEEE
Attention users in European Union private households
This marking on the product or on its packaging illustrates that, under European Directive
2012/19/EU governing used electrical and electronic appliances, this product may not be
disposed of with normal household waste. You are responsible for disposal of this equipment
through a designated waste electrical and electronic equipment collection. To determine the
locations for dropping off such waste electrical and electronic, contact your local government
ofce the waste disposal organiation that serves your household or the store at which you
purchased the product.
Attention ses in nite States:
Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling information,
contact: www.mygreenelectronics.com or www.eiae.org.

5
SAFETY INFORMATION
End of Life Directives-Recycling
Your new Public Information Display contains several materials that can be recycled for new
users.
Please dispose of according to all Local, State, and Federal laws.
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
E-Waste Declaration for India
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment . The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment.
Batteries
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the
general household waste! There is a separate collection system for used batteries, to allow
proper treatment and recycling in accordance with legislation.
Please contact your local authority for details on the collection and recycling schemes.
For Switzerland: The used battery is to be returned to the selling point.
For other non-EU countries: Please contact your local authority for correct method of
disposal of the used battery.
According to EU directive 2006/66/EC, the battery can’t be disposed improperly. The battery shall be
separated to collect by local service.
Turkey RoHS
Trkiye Cumhuriyeti EEE netmeliine Uygundur.
Ukraine RoHS
        
         
   3  2  157.

6
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symbols used in this manual
This icon indicates the existence of a potential hazard that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
Notice
• Read this User Manual carefully before using the LCD display and keep it for future reference.
• The product specications and other information provided in this User Manual are for reference only. All
information is subject to change without notice. Updated content can be downloaded from our web site at
displays.agneovo.com.
• To register online, go to displays.agneovo.com.
• To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may
affect the determination of the warranty period.
Cautions When Setting Up
• Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct sunlight.
• Do not cover or block the ventilation holes in the housing.
• Place the LCD display on a stable area. Do not place the LCD display where it may subject to vibration or
shock.
• Place the LCD display in a well-ventilated area.
• Do not place the LCD display outdoors.
• To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or
an excessively moist environment.
• Do not spill liquid or insert sharp objects into the LCD display through the ventilation holes. Doing so may
cause accidental re electric shock or damage the LCD display.
PRECAUTIONS

7
PRECAUTIONS
Warning:
Unplug the power cord
from the power outlet and
refer to qualied service
personnel under the following
conditions:
♦When the power cord is
damaged.
♦If the LCD display has been
dropped or the housing has
been damaged.
♦If the LCD display emits smoke
or a distinct odor.
Cautions When Using
• Use only the power cord supplied with the LCD display.
• The power outlet should be installed near the LCD display and
be easily accessible.
• If an extension cord is used with the LCD display, ensure that the
total current consumption plugged into the power outlet does not
exceed the ampere rating.
• Do not allow anything to rest on the power cord. Do not place the
LCD display where the power cord may be stepped on.
• If the LCD display will not be used for an indenite period of time
unplug the power cord from the power outlet.
• To disconnect the power cord, grasp and pull by the plug head.
Do not tug on the cord doing so may cause re or electric shock.
• Do not unplug or touch the power cord with wet hands.
• When turning off the display by detaching the power cord, wait 6
seconds before re-attaching the power cord for normal operation.
• Do not knock or drop the display during operation or
transportation.
Cleaning and Maintenance
• To protect your display from possible damage, do not put
excessive pressure on the LCD panel. When moving your
display, grasp the frame to lift; do not lift the display by placing
your hand or ngers on the LCD panel.
• Unplug the display if you need to clean it with a slightly damp
cloth. The screen may be wiped with a dry cloth when the power
is off. However, never use organic solvent, such as, alcohol, or
ammonia-based liquids to clean your display.
• If your display becomes wet, wipe it with dry cloth as soon as
possible.
• If a foreign substance or water gets in your display, turn the
power off immediately and disconnect the power cord. Then
remove the foreign substance or water, and send the unit to the
maintenance center.
• In order to maintain the best performance of your display and
ensure a longer lifetime, we strongly recommend using the
display in a location that falls within the following temperature
and humidity ranges.
♦Temperature: 0-40°C (32-104°F)
♦Humidity: 20-80% RH

8
PRECAUTIONS
Notice for the LCD Display
• In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
• Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease
with time.
• When static images are displayed for long periods of time, the image may cause an imprint on the LCD
display. This is called image retention or burn-in.
♦To prevent image retention, do any of the following:
• Set the LCD display to turn off after a few minutes of being idle.
• Use a screen saver that has moving graphics or a blank white image.
• Execute the ANTI-BURN-IN function of the LCD display. See Anti-Burn-in on page 31.
• Switch desktop backgrounds regularly.
• Adjust the LCD display to low brightness settings.
• Turn off the LCD display when the system is not in use.
♦Things to do when the LCD display shows image retention:
• Turn off the LCD display for extended periods of time. It can be several hours or several days.
• Use a screen saver and run it for extended periods of time.
• Use a black and white image and run it for extended periods of time.
• There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.
• IMPORTANT Always activate a moving screen saver program when you leave your display unattended.
Always activate a periodic screen refresh application if the unit will display unchanging static content.
Uninterrupted display of still or static images over an extended period may cause burn in also known
as after-imaging or ghost imaging on your screen. This is a well-known phenomenon in LCD panel
technology. In most cases the burned in or after-imaging or ghost imaging will disappear gradually
over a period of time after the power has been switched off.
• WARNING Severe burn-in or after-image or ghost image symptoms will not disappear and cannot be
repaired. This is also not covered under the terms of your warranty.

9
1.1 Package Contents
When unpacking, check if the following items are included in
the package. If any of them is missing or damaged, contact your
dealer.
Quick start guide
Power cord (for EU
except UK)
Note:
♦The pictures are for reference
only. Actual items may vary
upon shipment.
POWER
F1 F2 F3 F4
MUSIC
2
MOVIE
3
PHOTO
1
ROTATE
5
16:9/4:3
4
ENTER
MENU
MUTE
SLIDE SHOW SOURCEEXIT
6
OSD
8
ZOOM
7 9
BACKMUSIC
0
VOL
Remote control
PO-55F & PO-55H
displays.agneovo.com
PO-55F/PO-55H_Quick Guide_V010
Quick Start Guide
PO-55F & PO-55H LED-Backlit Display Quick Start Guide
LCD Display
Note:
♦Remote control is shipped with
the supplied AAA batteries.
♦For all other regions, apply a
power cord that conforms to
the AC voltage of the power
socket and has been approved
by and complies with the safety
regulations of the particular
country.
♦You might like to save the
package box and packing
material for shipping the
display.
CHAPTER 1: PRODUCT DESCRIPTION
Power cord (for UK)
Power cord (for US)

10
PRODUCT DESCRIPTION
1.2 Preparing for the Installation
• Due to the high power consumption, always use the plug
exclusively designed for this product. If an extended line is
required, please consult your service agent.
• The product should be installed on a at surface to avoid tipping.
The distance between the back of the product and the wall should
be maintained for proper ventilation. Avoid installing the product in
the kitchen, bathroom or any other places with high humidity so as
not to shorten the service life of the electronic components.
• The product can normally operate only under 5000m in altitude. In
installations at altitudes above 3000m, some abnormalities may be
experienced.
1.3 Moving the Display
1.3.1 Unpacking the Display
Before unpacking the display prepare a at and stable surface near a
wall outlet. Set the product box in an upright position according to the
arrow markings on the outside of the product box.
1Detach the four locks.
2Open the product box from the top of the box.
3Take the accessories out and remove the top cushion.
4Hold the display by the carrying handles rmly with two
people to remove the display from the box.
Do not grasp the display by the screen.
POWER
F1 F2 F3 F4
MUSIC
2
MOVIE
3
PHOTO
1
ROTATE
5
16:9/4:3
4
ENTER
MENU
MUTE
SLIDESHOW SOURCEEXIT
6
OSD
8
ZOOM
7 9
BACKMUSIC
0
VOL
Lock
Warning:
♦Do not press too hard on the
LCD panel or edge of the
frame, as this may cause the
device to malfunction.
♦During unpacking, make sure
to hold the carrying handles
to remove the device from its
packaging.

11
PRODUCT DESCRIPTION
1.3.2 Carrying the Display
When carrying the display, always hold it with two people using both
hands and the screen facing forward.
1.3.3 Setting Down the Display
When setting the display down place the screen face down on a at
and stable surface covered by a protective sheet and a table cushion
as shown in the illustration provided.
1.3.4 Placing the Display
When placing the display, keep the display upright. Never tilt the
display towards the left, right, or balanced on a single corner of the
frame.
Caution:
♦Avoid applying force or using
sharp objects on the LCD panel
at all times.
Caution:
♦Never press or place anything
on the back cover. This may
damage the internal parts of the
display.

12
PRODUCT DESCRIPTION
Note:
♦Avoid the wall-mounting kit to
block the ventilation holes on the
back of the display.
♦Make sure the distance between
the LCD display fans and the
wall is at least 4~5 cm.
♦Secure the LCD display on a
solid wall strong enough to bear
its weight.
♦Lay a protective sheet on a table,
which was wrapped around the
display when it was packaged,
beneath the screen surface so as
not to scratch the screen face.
♦Ensure you have all accessories
for mounting this display (wall
mount, ceiling mount, etc).
♦Follow the instructions that
come with the base mounting
kit. Failure to follow correct
mounting procedures could result
in damage to the equipment
or injury to the user or installer.
Product warranty does not cover
damage caused by improper
installation.
♦For the wall-mounting kit, use
M6 mounting screws (having
a length 10 mm longer than
the thickness of the mounting
bracket) and tighten them
securely.
♦Unit weight= 29.2 kg/ 64.2 lbs
(PO-55F) or 36.7 kg/ 80.7 lbs
(PO-55H). The equipment and its
associated mounting means still
remain secure during the test.
For use only with UL Listed Wall
Mount Bracket with minimum
weight/load: 38.0 kg/ 83.8 lb
(PO-55F) or 47.0 kg/ 103.6 lb
(PO-55H).
1.4 Wall Mounting Installation
To mount this display to a wall, you will have to obtain a standard
wall-mounting kit (commercially available). We recommend using
a mounting interface that complies with TUV-GS and/or UL1678
standard in North America.
To wall-mount the LCD display, screw the mounting bracket to the
VESA holes at the rear of the LCD display.
The IR and Light sensors are located on the right side of the rear
of the display. Please reposition the IR and Light sensors to the
desired location before mounting the display. Refer to P.27 for more
information.
400mm
400mm
PO-55F
400mm
400mm
PO-55H
1.4.1 VESA Grid
Model Name VESA Grid
PO-55F/PO-55H 400(H) x 400(V) mm

13
PRODUCT DESCRIPTION
Caution:
To prevent the display from falling:
♦For wall or ceiling installation, we recommend installing the display with metal brackets which are
commercially available. For detailed installation instructions, refer to the guide received with the respective
bracket.
♦To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or
other natural disaster, be sure to consult the bracket manufacturer for installation location.
1.4.2 Ventilation Requirements for Enclosure Locating
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.
40 mm 40 mm
40 mm
40 mm
1.5 Mounting in Portrait Position
This display can be installed in portrait position.
Rotate 90 degrees counter-clockwise such that one of the arrows on the rear of the LCD display is pointing up
and the other to the left side (as illustrated below).
90 90
Note:
♦Before mounting, make sure there is space to connect your devices. See “CHAPTER 2: MAKING
CONNECTIONS” on page 20.

14
PRODUCT DESCRIPTION
1.6 LCD Display Overview
1.6.1 Control Panel
AUTO PLUS MINUS MENU POWER
1
2
4
5
6
7
8
3
PO-55F
AUTO PLUS MINUS MENU POWER
1
4
5
6
7
8
2
3
PO-55H

15
PRODUCT DESCRIPTION
1IR sensor indicator
Displays the status of the IR sensor.
• Green: The display’s power is on.
• Red: The display is in Stand-by mode.
• Off: The display’s power is off.
2IR sensor
Receives the signal from the remote
control.
3Light sensor
Receives ambient light and enable
automatic backlight adjustment.
Note:
♦Please make sure the light sensor
is not covered when enabling Auto
Dimming function.
4POWER
Turns the power on/off.
Note:
♦POWER button does not function
if the Main Power switch is off.
5MENU
• Displays the On Screen Display
(OSD) menu.
• Selects items or accepts the settings
made in the OSD menu.
6MINUS
• Decreases the audio output level
while OSD menu is off.
• Navigates through the OSD menu
items.
• Decreases the adjustment while
OSD menu is on.
7PLUS
• Increases the audio output level
while OSD menu is off.
• Navigates through the OSD menu
items.
• Increases the adjustment while OSD
menu is on.
8AUTO
• Performs auto adjustment for the VGA
input when the OSD menu is off.
• Exits the current menu when the
OSD menu is on.

16
PRODUCT DESCRIPTION
1.6.2 Input/Output Terminals
RS232 USB AUDIO
OUT AUDIO IN D-SUB HDMI DVI
DP
1 2 4 5 6 7 983
10
PO-55F
RS232 USB AUDIO
OUT AUDIO IN D-SUB HDMI DVI
DP
1 2 4 5 6 7 983
10
PO-55H

17
PRODUCT DESCRIPTION
1AC-IN
Connects with the supplied power cord.
2Main Power switch
Switches the main power on or off.
3RS232
Connects with the serial IO connector
of another device.
4USB
Reserved for the touch screen. Not
supported with this model.
5Audio out
• Outputs the audio that is supplied by
the video source.
• Connects with an external audio
amplier or other applicable audio
devices.
Note:
♦Headphones and earphones are not
supported.
6Audio in
Connects with the audio out connector of
a video source such as a computer, video
player when the display is connected to the
source via the VGA or DVI connector.
7D-SUB
Connects with the analog video output
(VGA) of a computer.
8HDMI
Connects with devices supporting audio/
video data using the HDMI interface.
9DVI
Connects with the digital video output of a
computer, and other applicable devices.
10 DisplayPort (DP)
Connects with the digital video output of a
computer, and other applicable devices.