Agilent Technologies N5106A PXB Baseband User manual

N5106A PXB Baseband Generator
and Channel Emulator
Configuration Guide
The purpose of this guide is to assist in the ordering process for the PXB.
Choose an order convenience bundle or start at Step 1 to build your own
configuration. Refer to the on-line configuration assistant for more detailed
guidance on configuring the PXB.
www.agilent.com/find/PXBconfig
You Can Upgrade!
Options can be added
after initial purchase.

2
Agilent N5106A PXB
baseband generator
and channel emulator
bundle configurations
Choose an order convenience bundle
Options 2B2, 2B4, and 4B2 are order convenience bundles representing a specif-
ic set of PXB hardware and firmware options for MIMO baseband generation
and channel emulation. Each MIMO bundle option supports internal baseband
generation with real-time fading, RF fading with PXA/MXA/EXA signal analyzers
as RF inputs and EXG/MXG/ESG vector signal generators as RF outputs, and all
other valid configurations including baseband summing.
Option Description Includes
Application bundles
2B2 2x2 MIMO bundle N5106A, with Options 616, 634,
EFP, JFP, QFP
2B4 2x4 MIMO bundle N5106A, with Options 620, 636,
EFP, JFP, QFP
4B2 4x2 MIMO bundle N5106A, with Options 622, 636,
EFP, JFP, QFP
185 Global navigation satellite systems
application bundle
N5106A, with Options 611, 632,
EFP, JFP
186 Digital video application bundle N5106A, with Options 612, 632,
EFP, JFP, QFP
Requirements and recommendations for using PXB
with other instruments
• When an EXG/MXG is purchased for use with the PXB, internal baseband generation option is
not required, only Option 503 or 506.
• When E5515C (8960) is purchased for use with the PXB, digital bus Option E5515C-004 is
required.
• When a PXA is purchased for use with the PXB, all analysis bandwidth options are compatible
for up to 40 MHz RF fading or signal capture. For MIMO inputs, PXA cannot be mixed with
EXA/MXA, or different bandwidth options.
• When an EXA/MXA is purchased for use with the PXB, analysis bandwidth Option B25 or B40
is required. For MIMO inputs, analyzers must have the same bandwidth option.
• When an analyzer is purchased with PXB Option QFP, a preamplifier option is recommended.
• When an ESG is purchased for use with the PXB, an internal baseband generator Option 601 or
602 is required.
• When the PXB is used for signal creation, Signal Studio software should be licensed to the
PXB. When the ESG is used for signal creation for loopback fading, Signal Studio software
should be licensed to the ESG.

33
The high level of flexibility offered by the PXB allows
for a variety of configurations. It supports up to 12
independently licensed digital signal processing (DSP)
blocks that can be defined by the instrument firmware
to function as baseband generators or faders.
Refer to Figure 1 for an example of a MIMO 2x2 configuration. This 2x2 MIMO
configuration illustrates 2 DSP blocks for baseband generation, 4 DSP blocks
for fading, and two I/O ports connected to MXGs for RF outputs. A total of
6 DSP blocks and 2 I/O ports is required for this configuration.
Figure 1. Example of a MIMO 2x2 configuration. Each orange block represents 1 DSP block.
The 4x4 and 2x8 MIMO configurations exceed the physical number of installed
DSP blocks for the number of playback channels and faders needed. These
configurations require firmware license options N5106A-R2C and N5106A-169.
This maximizes the hardware resources and enables up to two faders per DSP
block.
See the Release Notes or www.agilent.com/find/N5106AK-R2C for more information.
Agilent N5106A PXB
configuration steps
4 DSP blocks
for fading
2 DSP blocks for
baseband generation

4
Build your own
PXB configuration
Step 1. Identify your PXB use model to determine
the applicable baseband card, I/O card, and
firmware options
PXB use model
(configuration)
Baseband
options
I/O
cards
PXB FW
options
Recommended
PXB options
1-Channel generate 611 632 EFP JFP
2-Channel generate 612 632 EFP JFP
4-Channel generate 614 634 EFP JFP
6-Channel generate 616 636 EFP JFP
2-Channel generate & sum 612 632 EFP JFP
4-Channel generate & sum 614 632 EFP JFP
1-Channel generate & fade 612 632 EFP, QFP JFP
2-Channel generate & fade 614 632 EFP, QFP JFP
1-Channel fading (ext. inputs) 611 632 QFP JFP
1-Channel loopback fading (ext. inputs) 611 632 QFP JFP
2-Channel fading (ext. inputs) 612 634 QFP JFP
1-Channel fading (ext inputs) with
internal faded interferer 613 632 EFP, QFP JFP, 8FP
1x2 single-user MIMO 613 632 EFP, QFP JFP, RFP, TFP
1x4 single-user MIMO 615 634 EFP, QFP JFP, RFP, TFP
1x6 single-user MIMO 617 636 EFP, QFP JFP, RFP, TFP
1x8 single-user MIMO 619 638 EFP, QFP JFP, RFP, TFP
2x1 single-user MIMO 614 632 EFP, QFP JFP, RFP, TFP
2x1x2 single/multi-user MIMO 616 634 EFP, QFP JFP, RFP, TFP
2x2 single/multi-user MIMO 616 632 EFP, QFP JFP, RFP, TFP
2x4 single/multi-user MIMO 620 634 EFP, QFP JFP, RFP, TFP
2x8 single-user MIMO 620 638 EFP, QFP, 169 JFP, RFP, TFP
4x1 single-user MIMO 618 632 EFP, QFP JFP, RFP, TFP
4x2 single/multi-user MIMO 622 632 EFP, QFP JFP, RFP, TFP
4x4 single-user MIMO 622 634 EFP, QFP, 169 JFP, RFP, TFP
1x2 single-user MIMO (ext. inputs) 612 634 QFP JFP, RFP, TFP
1x4 single-user MIMO (ext. inputs) 614 636 QFP JFP, RFP, TFP
1x6 single-user MIMO (ext. inputs) 616 638 QFP JFP, RFP, TFP
2x2 single-user MIMO (ext. inputs) 614 634 QFP JFP, RFP, TFP
2x4 single-user MIMO (ext. inputs) 618 636 QFP JFP, RFP, TFP
2x6 single-user MIMO (ext. inputs) 622 638 QFP JFP, RFP, TFP
2x8 single-user MIMO (ext. inputs) 620 638 QFP JFP, RFP, TFP
4x2 single-user MIMO (ext.inputs) 622 632 QFP JFP, RFP, TFP
4x4 single-user MIMO (ext.inputs) 622 638 QFP JFP, RFP, TFP
1-Channel fading for
Agilent E5515C (8960) 1, 2 611 632 QFP, 8FP JFP
2-Channel fading for
Agilent E5515C (8960) 1, 2 612 632 QFP, 8FP JFP
1-Channel fading with faded interferer
for Agilent E5515C (8960) 1, 2 613 634 EFP, QFP, 8FP JFP
1x2 single-user MIMO (Rx Diversity)
for Agilent E5515C (8960) 1, 2 612 634 QFP, 8FP JFP
2x2 MIMO for HSPA
Agilent E5515C (8960) 2614 634 QFP, 8FP, R2C JFP
1. For DC-HSPA support with Agilent E5515C (8960)
configurations, Option R2C is required.
2. If purchasing the E5515C (8960) for use with the
PXB, digital bus Option E5515C-004 is required.

5
1. For upgrade model, options, and quantities,
refer to the N5106A configuration assistant
www.agilent.com/find/PXBconfig and the
upgrade section in this guide.
2. If purchasing the E5515C (8960) for use with the
PXB, digital bus Option E5515C-004 is required.
3. Requires the 8960 test application's corresponding
Option 405 digital bus software license
(E1962B-405, E1966A-405). The E1987A Fast
Switch test application requires the corresponding
Option 405 license to use a desired format.
Step 2. Choose firmware options (required)
Option Description Requires Upgrade1
EFP Baseband generation Yes
8FP 2Connect to E5515C (8960) N5106A-QFP Yes
JFP Calibrated AWGN Yes
QFP Fading with SISO channel models Yes
RFP Mobile WiMAX™channel models N5106A-QFP Yes
TFP LTE channel models N5106A-QFP Yes
169 Fader interleaving for 4x4 and 2x8 N5106A-QFP, R2C
+ RFP or TFP Yes
Note: Option EFP or QFP is required for a valid N5106A configuration.
The PXB currently supports the following 8960 wireless communications test
set applications
Model Description Firmware version
E1962B 2, 3 cdma2000®mobile test application B.16.12 or later
E1966A 2, 3 1xEV-DO terminal test application A.11.12 or later
E1987A 2, 3 Fast Switch test application supports: cdma2000 and
1xEV-DO
A.10.12 or later
E6701G GSM/GPRS Lab App G G.01.12 or later
E6702C cdma2000 Lab App C C.01.12 or later
E6703C W-CDMA Lab App C C.01.17 or later
E6706C 1xEV-DO Lab App C C.01.12 or later
E6785G Fast Switch Lab App G
Supports: GSM/GPRS, cdma2000, W-CDMA and 1xEV-DO
G.00.15 or later
Step 3. Choose accessory options
Option Description
Not
compatible Upgrade
181 USB enabled keyboard, mouse,
and DVD-ROM drive Yes
1CP Rack mount and front handle kit N5106A-1CR Yes
1CR Rack slide kit N5106A-1CP Yes

66
1. For factory installation of Signal Studio software,
Signal Studio model-number must be ordered
under the N5106A.
Step 4. Choose signal creation software options
Option Description
Real-time
generation Upgrade
N7600B1Signal Studio for 3GPP W-CDMA FDD Yes Yes
N7601B1Signal Studio for cdma2000/1xEV-DO Yes Yes
N7602B1Signal Studio for GSM/EDGE Yes Yes
N7606B1Signal Studio for Bluetooth®No Yes
N7609B1Signal Studio for global navigation satellite
systems Yes Yes
N7611B1Signal Studio for broadcast radio No Yes
N7612B1Signal Studio for TD-SCDMA No Yes
N7615B1Signal Studio for 802.16 WiMAX No Yes
N7617B1Signal Studio for 802.11 WLAN No Yes
N7622B Signal Studio Toolkit None Yes
N7623B1Signal Studio for digital video Yes Yes
N7624B1Signal Studio for 3GPP LTE FDD Yes Yes
N7625B1Signal Studio for 3GPP LTE TDD Yes Yes
Step 5. Choose extended warranty and start up
assistance options
Option Description
Included 3-year warranty (return-to-Agilent), standard
R-51B-001-5C Warranty Assurance Plan, Return to Agilent, 5 years
PS-S10 Remote scheduled assistance 1-999 hours
PS-S20 Daily productivity assistance
PS-S20-01 Recommended startup assistance
PS-X10 Custom services to be qualified by Agilent

7
Available upgrades
for the PXB
You Can Upgrade!
Options can be added
after initial purchase.
www.agilent.com/find/N5106A_upgrade
For upgrade DSP block licenses, baseband cards and I/O cards, first identify the
current N5106A configuration. To determine the correct upgrade options (031,
032, or 034) and quantities to order, refer to the N5106A configuration assistant
at www.agilent.com/find/PXBconfig.

“WiMAX”, “Mobile WiMAX” and “WiMAX Forum” are trademarks of the WiMAX Forum.
cdma2000®is a US registered certification mark of the Telecommunications Industry Association.
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Agilent
Technologies, Inc.
myAgilent
www.agilent.com/find/myagilent
A personalized view into the information most relevant to you.
Three-Year Warranty
www.agilent.com/find/ThreeYearWarranty
Beyond product specification, changing the ownership
experience. Agilent is the only test and measurement company
that offers three-year warranty on all instruments, worldwide
Agilent Assurance Plans
www.Agilent.com/find/AssurancePlans
Five years of protection and no budgetary surprises to ensure
your instruments are operating to specifications and you can
continually rely on accurate measurements.
www.agilent.com/quality
Agilent Electronic Measurement Group
DEKRA Certified ISO 9001:2008
Quality Management System
Agilent Channel Partners
www.agilent.com/find/channelpartners
Get the best of both worlds: Agilent’s measurement expertise
and product breadth, combined with channel partner
convenience.
www.agilent.com
www.agilent.com/find/PXB
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
www.agilent.com/find/contactus
Americas
Canada [phone]
Brazil (11) 4197 3600
Mexico 01800 5064 800
United States [phone]
Asia Pacific
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 375 8100
Europe & Middle East
Belgium 32 (0) 2 404 93 40
Denmark 45 45 80 12 15
Finland 358 (0) 10 855 2100
France 0825 010 700*
*0.125 €/minute
Germany 49 (0) 7031 464 6333
Ireland 1890 924 204
Israel 972-3-9288-504/544
Italy 39 02 92 60 8484
Netherlands 31 (0) 20 547 2111
Spain 34 (91) 631 3300
Sweden 0200-88 22 55
United Kingdom 44 (0) 118 927 6201
For other unlisted countries:
www.agilent.com/find/contactus
(BP-09-27-13)
Product specifications and descriptions in
this document subject to change without
notice.
© Agilent Technologies, Inc. 2013
Published in USA, November 25, 2013
5989-8972EN