Agilent Technologies X Series User manual

Agilent N9062A Signal Analyzer User Guide
http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
This manual provides documentation for the
following X-Series Analyzers:
PXA Signal Analyzer N9030A
MXA Signal Analyzer N9020A
EXA Signal Analyzer N9010A
CXA Signal Analyzer N9000A
MXE EMI Receiver N9038A
ManualLib.com collects and classifies the global product
instrunction manuals to help users access anytime and
anywhere, helping users make better use of products.
http://www.manuallib.com

Agilent X-Series
Signal Analyzer
N9062A & W9062A
SCPI Language
Compatibility Guide
This manual provides documentation for the
following X-Series Analyzers:
PXA Signal Analyzer N9030A
MXA Signal Analyzer N9020A
EXA Signal Analyzer N9010A
CXA Signal Analyzer N9000A
MXE EMI Receiver N9038A
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Notices
© Agilent Technologies, Inc. 2010-2014
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into aforeign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
N9062-90001
Print Date
March 2014
Supersedes: February 2012
Printed in USA
Agilent Technologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403
Warranty
The material contained in this doc-
ument is provided “as is,” and is
subject to being changed, without
notice, in future editions. Further,
to the maximum extent permitted
byapplicablelaw, Agilent disclaims
all warranties, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of mer-
chantability and fitness for a par-
ticular purpose. Agilent shall not
be liable for errors or for incidental
or consequential damages in con-
nection with the furnishing, use, or
performance of this document or of
any information contained herein.
Should Agilent and the user have a
separate written agreement with
warranty terms covering the mate-
rial in this document that conflict
with these terms, the warranty
terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described
in this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance
of a U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer soft-
ware” as defined in DFAR 252.227-7014
(June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted
computer software” as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contract clause. Use,
duplication or disclosure of Software is
subject to Agilent Technologies’ standard
commercial license terms, and non-DOD
Departments and Agencies of the U.S.
Government will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Gov-
ernment users will receive no greater than
Limited Rights as defined in FAR 52.227-
14 (June 1987) or DFAR 252.227-7015
(b)(2) (November 1995), as applicable in
any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully
understood and met.
2
Trademark
Acknowledgements
Microsoftis a U.S. registered
trademark of Microsoft Corporation.
Windowsand MS Windowsare
U.S. registered trademarks of
Microsoft Corporation.
Adobe Readeris a U.S. registered
trademark of Adobe System
Incorporated.
Java™ is a U.S. trademark of Sun
Microsystems, Inc.
MATLABis a U.S. registered
trademark of Math Works, Inc.
Norton Ghost™ is a U.S. trademark
of Symantec Corporation.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

3
Warranty
This Agilent technologies instrument product is warranted against defects in material and workmanship for
a period of one year from the date of shipment. During the warranty period, Agilent Technologies will, at
its option, either repair or replace products that prove to be defective.
For warranty service or repair, this product must be returned to a service facility designated by Agilent
Technologies. Buyer shall prepay shipping charges to Agilent Technologies and AgilentTechnologies shall
pay shipping charges to return the product to Buyer. However, Buyer shall pay all shipping charges, duties,
and taxes for products returned to Agilent Technologies from another country.
Where to Find the Latest Information
Documentation is updated periodically. For the latest information about this analyzer, including firmware
upgrades, application information, and product information, see the following URLs:
http://www.agilent.com/find/pxa
http://www.agilent.com/find/mxa
http://www.agilent.com/find/exa
http://www.agilent.com/find/cxa
http://www.agilent.com/find/mxe
To receive the latest updates by email, subscribe to Agilent Email Updates:
http://www.agilent.com/find/emailupdates
Information on preventing analyzer damage can be found at:
http://www.agilent.com/find/tips
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

4
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Contents
5
1. Getting Started
What Does the Agilent N9062A & W9062A SCPI Language Compatibility Application Do? . . . . . . . . . 16
Documentation for the N9062A & W9062A SCPI Language Compatibility application . . . . . . . . . . . . . . 17
Signal Analyzers with N9062A/W9062A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Signal Analyzer Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SCPI Language Compatibility Application General Rules and Limitations . . . . . . . . . . . . . . . . . . . . . . . . 18
Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Data Formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Numeric Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Returning Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Status System & SRQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Supported Commands and Queries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Unsupported Commands and Queries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Hardware and Firmware Requirements for
N9062A/W9062A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installing the N9062A & W9062A SCPI Language Compatibility Application . . . . . . . . . . . . . . . . . . . . . 23
License for N9062A/W9062A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Licensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
License Installation Procedure over USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Verify the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Running Software that Requires SCPI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Service and Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2. Front Panel Operations
Selecting SCPI Language Compatibility Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Selecting SCPI Language Compatibility Mode as the Power-on Application. . . . . . . . . . . . . . . . . . . . . . . 29
Mode Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting Compatibility Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
R&S FSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
R&S FSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
R&S FSU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting Mode IDN Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Compatibility Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
System IDN Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
User IDN Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Restore Mode Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Send Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3. Compatible SCPI Commands
SCPI Summary Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Agilent N9062A/W9062A Supported IEEE SCPI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Supported SCPI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Mode Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Mode Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

6
Contents
Compatibility Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
R&S FSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
R&S FSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
R&S FSU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Mode IDN Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Compatibility Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
System IDN Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
User IDN Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
ABORt Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
ABORt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CALCulate:DELTamarker Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CALCulate<1|2>:DELTamarker<1...4>[:STATe] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CALCulate<1|2>:DELTamarker<1...4>:MODE ABSolute|RELative . . . . . . . . . . . . . . . . . . . . . . . . . 60
CALCulate<1|2>:DELTamarker<1...4>:AOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CALCulate<1|2>:DELTamarker<1...4>:TRACe <1…3> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CALCulate<1|2>:DELTamarker<1...4>:X<0…MAX>(frequency | sweep time) . . . . . . . . . . . . . . . . 61
CALCulate<1|2>:DELTamarker<1...4>:X:RELative?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CALCulate<1|2>:DELTamarker<1...4>:Y? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CALCulate<1|2>:DELTamarker<1...4>:MAXimum[:PEAK] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:LEFT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:NEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:RIGHt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
CALCulate<1|2>:DELTamarker<1...4>:MINimum[:PEAK]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
CALCulate<1|2>:DELTamarker<1...4>:MINimum:LEFT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
CALCulate<1|2>:DELTamarker<1...4>:MINimum:NEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
CALCulate<1|2>:DELTamarker<1...4>:MINimum:RIGHt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
CALCulate<1|2>:DELTamarker<1...4>:LINK ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed[:STATe] ON | OFF. . . . . . . . . . . . . . . . . . 64
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
<numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed:RPOint:Y <numeric_value> . . . . . . . . . . 65
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed:RPOint:Y:OFFSet <numeric_value> . . . 65
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed:RPOint:X <numeric_value> . . . . . . . . . . 66
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:PNOise[:STATe] ON|OFF . . . . . . . . . . . . . . . . . 66
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:PNOise:AUTO ON | OFF. . . . . . . . . . . . . . . . . . 66
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:PNOise:RESult? . . . . . . . . . . . . . . . . . . . . . . . . . 67
CALCulate:LIMit Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
CALCulate<1|2>:LIMit<1...6>:ACTive?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
CALCulate<1|2>:LIMit<1...6>:TRACe <1…3> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
CALCulate<1|2>:LIMit<1...6>:STATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
CALCulate<1|2>:LIMit<1...6>:UNIT DBM | DBPW | WATT | DBUV | DBMV | VOLT |DBUA |
AMPere| DB | DEG | RAD | S | HZ | PCT | UNITLESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
CALCulate<1|2>:LIMit<1...6>:FAIL?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CALCulate<1|2>:LIMit<1...6>:CLEar[:IMMediate]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CALCulate<1|2>:LIMit<1...6>:COMMent <string>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CALCulate<1|2>:LIMit<1...6>:COPY 1 to 6 | <name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
CALCulate<1|2>:LIMit<1...6>:NAME <name of limit line> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
CALCulate<1|2>:LIMit<1...6>:DELete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
CALCulate:LIMit:ESPectrum Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Contents
7
CALCulate<1|2>:LIMit<1...6>:ESPectrum:MODE AUTO | MANual | USER. . . . . . . . . . . . . . . . . . 71
CALCulate<1|2>:LIMit<1...6>:ESPectrum:VALue <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . 71
CALCulate<1|2>:LIMit<1...6>:ESPectrum:RESTore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CALCulate:LIMit:ACPower Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CALCulate<1|2>:LIMit<1…6>:ACPower[:STATe]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CALCulate<1|2>:LIMit<1…6>:ACPower:ACHannel[:RELative] . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CALCulate<1|2>:LIMit<1…6>:ACPower:ACHannel[:RELative]:STATe . . . . . . . . . . . . . . . . . . . . . 73
CALCulate<1|2>:LIMit<1…6>:ACPower:ACHannel:ABSolute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
CALCulate<1|2>:LIMit<1…6>:ACPower:ACHannel:ABSolute:STATe . . . . . . . . . . . . . . . . . . . . . . 74
CALCulate<1|2>:LIMit<1…6>:ACPower:ACHannel:RESult? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
CALCulate<1|2>:LIMit<1…6>:ACPower:ALTernate<1|2>[:RELative]. . . . . . . . . . . . . . . . . . . . . . . 75
CALCulate<1|2>:LIMit<1…6>:ACPower:ALTernate<1|2>[:RELative]:STATe. . . . . . . . . . . . . . . . . 75
CALCulate<1|2>:LIMit<1…6>:ACPower:ALTernate<1|2>:ABSolute. . . . . . . . . . . . . . . . . . . . . . . . 76
CALCulate<1|2>:LIMit<1…6>:ACPower:ALTernate<1|2>:ABSolute:STATe. . . . . . . . . . . . . . . . . . 76
CALCulate<1|2>:LIMit<1…6>:ACPower:ALTernate<1|2>:RESult? . . . . . . . . . . . . . . . . . . . . . . . . . 77
CALCulate:LIMit:CONTrol Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
CALCulate<1|2>:LIMit<1...6>:CONTrol[:DATA] <numeric_value>,<numeric_value>.. . . . . . . . . . 77
CALCulate<1|2>:LIMit<1...6>:CONTrol:DOMain FREQuency | TIME . . . . . . . . . . . . . . . . . . . . . . 77
CALCulate<1|2>:LIMit<1...6>:CONTrol:OFFSet <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . 78
CALCulate<1|2>:LIMit<1...6>:CONTrol:MODE RELative | ABSolute. . . . . . . . . . . . . . . . . . . . . . . 78
CALCulate<1|2>:LIMit<1...6>:CONTrol:SHIFt <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . 79
CALCulate<1|2>:LIMit<1...6>:CONTrol:SPACing LINear | LOGarithmic . . . . . . . . . . . . . . . . . . . . 79
CALCulate:LIMit:LOWer Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
CALCulate<1|2>:LIMit<1...6>:LOWer[:DATA] <numeric_value>,<numeric_value>... . . . . . . . . . . 79
CALCulate<1|2>:LIMit<1...6>:LOWer:STATe ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
CALCulate<1|2>:LIMit<1...6>:LOWer:OFFSet <numeric_value>. . . . . . . . . . . . . . . . . . . . . . . . . . . 80
CALCulate<1|2>:LIMit<1...6>:LOWer:MARGin <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . 81
CALCulate<1|2>:LIMit<1...6>:LOWer:MODE RELative | ABSolute . . . . . . . . . . . . . . . . . . . . . . . . 81
CALCulate<1|2>:LIMit<1...6>:LOWer:SHIFt <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
CALCulate<1|2>:LIMit<1...6>:LOWer:SPACing LINear | LOGarithmic. . . . . . . . . . . . . . . . . . . . . . 82
CALCulate<1|2>:LIMit<1...6>:LOWer:THReshold <numeric_value>. . . . . . . . . . . . . . . . . . . . . . . . 82
CALCulate:LIMit:UPPer Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
CALCulate<1|2>:LIMit<1...6>:UPPer[:DATA] <numeric_value>,<numeric_value>... . . . . . . . . . . . 83
CALCulate<1|2>:LIMit<1...6>:UPPer:STATe ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
CALCulate<1|2>:LIMit<1...6>:UPPer:OFFSet <numeric_value>. . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
CALCulate<1|2>:LIMit<1...6>:UPPer:MARGin <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . 84
CALCulate<1|2>:LIMit<1...6>:UPPer:MODE RELative | ABSolute . . . . . . . . . . . . . . . . . . . . . . . . . 84
CALCulate<1|2>:LIMit<1...6>:UPPer:SHIFt <numeric_value>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
CALCulate<1|2>:LIMit<1...6>:UPPer:SPACing LINear | LOGarithmic. . . . . . . . . . . . . . . . . . . . . . . 85
CALCulate<1|2>:LIMit<1...6>:UPPer:THReshold <numeric_value>. . . . . . . . . . . . . . . . . . . . . . . . . 85
CALCulate:MARKer Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
CALCulate<1|2>:MARKer<1...4>[:STATe] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
CALCulate<1|2>:MARKer<1...4>:AOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
CALCulate<1|2>:MARKer<1...4>:TRACe 1 to 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
CALCulate<1|2>:MARKer<1...4>:X <0…MAX> (frequency | sweep time) . . . . . . . . . . . . . . . . . . . 87
CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:STATe] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT <0…MAX> (frequency | sweep time). . . . . . . 87
CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHT <0…MAX> (frequency | sweep time) . . . . . 88
CALCulate<1|2>:MARKer<1...4>:COUNt ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

8
Contents
CALCulate<1|2>:MARKer<1...4>:COUNt:RESolution 0.1 | 1 | 10 | 100 | 1000 | 10000 Hz . . . . . . . 88
CALCulate<1|2>:MARKer<1...4>:COUNt:FREQuency?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CALCulate<1|2>:MARKer<1...4>:LOEXclude ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CALCulate<1|2>:MARKer<1...4>:Y?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CALCulate<1|2>:MARKer<1...4>:Y:PERCent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CALCulate<1|2>:MARKer<1...4>:MAXimum[:PEAK]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
CALCulate<1|2>:MARKer<1...4>:MAXimum:NEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
CALCulate<1|2>:MARKer<1...4>:MAXimum:LEFT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
CALCulate<1|2>:MARKer<1...4>:MAXimum:RIGHt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
CALCulate<1|2>:MARKer<1...4>:MAXimum:AUTO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
CALCulate<1|2>:MARKer<1...4>:MINimum:AUTO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
CALCulate<1|2>:MARKer<1...4>:MINimum[:PEAK]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CALCulate<1|2>:MARKer<1...4>:MINimum:NEXT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CALCulate<1|2>:MARKer<1...4>:MINimum:RIGHt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CALCulate<1|2>:MARKer<1...4>:MINimum:LEFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CALCulate<1|2>:MARKer<1...4>:PEXCursion <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CALCulate:MARKer:FUNCtion Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CALCulate<1|2>:MARKer<1…4>:FUNCtion:CENTer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CALCulate<1|2>:MARKer<1…4>:FUNCtion:CSTep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:COUNt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CALCulate<1|2>:MARKer<1…4>:FUNCtion:REFerence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:X?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:Y?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:SORT X|Y . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CALCulate<1|2>:MARKer<1…4>:FUNCtion:SUMMary:RMS[:STATe] ON | OFF. . . . . . . . . . . . . 95
CALCulate<1|2>:MARKer<1…4>:FUNCtion:SUMMary:RMS:RESult? . . . . . . . . . . . . . . . . . . . . . 95
CALCulate<1|2>:MARKer<1...4>:FUNCtion:NOISe[:STATe] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
CALCulate<1|2>:MARKer<1...4>:FUNCtion:NOISe:RESult? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
CALCulate:MARKer:FUNCtion:POWer Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:SELect ACPower | CPOWer | MCACpower |
OBANdwidth | OBWidth | CN | CN0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:RESult? ACPower | CPOWer | MCACpower |
OBANdwidth | OBWidth | CN | CN0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:RESult:PHZ ON | OFF . . . . . . . . . . . . . . . . . 97
CALCulate:STATistics Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
CALCulate:STATistics:APD[:STATe] ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
CALCulate:STATistics:CCDF[:STATe] ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
CALCulate:STATistics:CCDF:X<1…3>? P0_01 | P0_1 | P1 | P10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CALCulate:STATistics:NSAMples <100…1E9>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CALCulate:STATistics:SCALe:AUTO ONCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
CALCulate:STATistics:SCALe:X:RLEVel –130dBm to 30dBm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
CALCulate:STATistics:SCALe:X:RANGe 10dB to 200dB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
CALCulate:STATistics:SCALe:Y:UPPer 1E–8 to 1.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
CALCulate:STATistics:SCALe:Y:LOWer 1E–9 to 0.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
CALCulate:STATistics:PRESet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
CALCulate:STATistics:RESult<1…3>? MEAN | PEAK | CFACtor | ALL. . . . . . . . . . . . . . . . . . . . 101
CALCulate:THReshold Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Contents
9
CALCulate<1|2>:DLINe<1|2> MINimum…MAXimum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
CALCulate<1|2>:DLINe<1|2>:STATe ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
CALCulate<1|2>:THReshold MINimum to MAXimum (depending on current unit). . . . . . . . . . . . 102
CALCulate<1|2>:THReshold:STATe ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
CALCulate<1|2>:FLINe<1|2> 0...fmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
CALCulate<1|2>:FLINe<1|2>:STATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
CALCulate<1|2>:TLINe<1|2> 0...1000s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
CALCulate<1|2>:TLINe<1|2>:STATe ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
CALCulate:UNIT Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
CALCulate<1|2>:UNIT:POWer DBM | V | A | W | DB | PCT | UNITLESS |DBPW | WATT | DBUV
|DBMV | VOLT | DBUA | AMPere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
CALibration Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
CALibration[:ALL]?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
CALibration:STATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
DISPlay Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
DISPlay:FORMat SINGle | SPLit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
DISPlay:ANNotation:FREQuency ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
DISPlay:LOGO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
DISPlay:PSAVe[:STATe] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
DISPlay:PSAVe:HOLDoff 1 to 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
DISPlay:CMAP<1 to 26>:DEFault<1|2>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
DISPlay:CMAP<1 to 26>:HSL <hue>,<sat>,<lum> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
DISPlay:CMAP<1 to 26>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan | LRED | LMAGenta . . . . . . . . 108
DISPlay[:WINDow<1|2>]:SELect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
DISPlay[:WINDow<1|2>]:SIZE LARGe|SMALl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
DISPlay[:WINDow<1|2>]:TEXT[:DATA] <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
DISPlay[:WINDow<1|2>]:TEXT:STATe ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
DISPlay[:WINDow<1|2>]:TIME ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe] 10dB to 200dB . . . . . . . . . . . . . . . . . . . . . 110
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:MODE ABSolute | RELativ . . . . . . . . . . . 110
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:RLEVel . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:RLEVel:OFFSet . . . . . . . . . . . . . . . . . . . . 111
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:PDIVision . . . . . . . . . . . . . . . . . . . . . . . . . 112
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y:SPACing LINear | LOGarithmic| LDB. . . . . . . . . . . 112
DISPlay[:WINDow<1|2>]:TRACe<1…3>:MODE WRITe | VIEW | AVERage | MAXHold | MINHold
113
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>[:STATe] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
FORMat Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
FORMat[:DATA]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
HCOPy Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
HCOPy:ABORt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
HCOPy:CMAP<1 to 26>:DEFault1|2|3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
HCOPy:CMAP<1 to 26>:HSL <hue>,<sat>,<lum> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
HCOPy:CMAP<1 to 26>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan | LRED | LMAGenta. . . . . . . . 115
HCOPy:DESTination<1|2> <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
HCOPy:DEVice:COLor ON|OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
HCOPy:DEVice:LANGuage<1|2> GDI | WMF | EWMF | BMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

10
Contents
HCOPy[:IMMediate<1|2>]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
HCOPy:ITEM:ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
HCOPy:ITEM:WINDow<1|2>:TABle:STATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
HCOPy:ITEM:WINDow<1|2>:TEXT <string>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
HCOPy:ITEM:WINDow<1|2>:TRACe:STATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
HCOPy:PAGE:ORIentation<1|2> LANDscape | PORTrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
INITiate Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
INITiate<1|2>:CONTinuous ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
INITiate<1|2>:CONMeas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
INITiate<1|2>[:IMMediate] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
INPut Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
INPut<1|2>:ATTenuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
INPut<1|2>:ATTenuation:AUTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
INPut<1|2>:EATT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
INPut<1|2>:EATT:AUTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
INPut<1|2>:EATT:STATe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
INPut<1|2>:IMPedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
INPut<1|2>:GAIN:STATe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
INSTrument Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
INSTrument[:SELect] SANalyzer | DDEMod | ADEMod | MGSM | WCDPower|BWCDpower
|MWCDpower | BC2K| BDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
INSTrument:NSELect <numeric value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
MMEMory Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
MMEMory:CATalog? <path>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
MMEMory:CDIRectory <directory_name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
MMEMory:COPY <file_source>,<file_destination>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
MMEMory:DATA <file_name>[,<block_data>] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
MMEMory:DELete <file_name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
MMEMory:INITialize <msus>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
MMEMory:LOAD:STATe 1,<file_name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
MMEMory:LOAD:AUTO 1,<file_name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
MMEMory:MDIRectory <directory_name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
MMEMory:MOVE <file_source>,<file_destination> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
MMEMory:MSIS <device> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
MMEMory:NAME <file_name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
MMEMory:RDIRectory <directory_name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
MMEMory:STORe<1|2>:STATe 1,<file_name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
MMEMory:STORe<1|2>:TRACe <1…6>,<file_name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
MMEMory:CLEar:STATe 1,<file_name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
MMEMory:CLEar:ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
MMEMory:SELect[:ITEM]:HWSettings ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
MMEMory:SELect[:ITEM]:SCData ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
MMEMory:SELect[:ITEM]:TRANsducer:ALL ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
MMEMory:SELect[:ITEM]:ALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
MMEMory:SELect[:ITEM]:NONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
MMEMory:SELect[:ITEM]:DEFault. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
MMEMory:COMMent <string>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Contents
11
SENSe:AVERage Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
[SENSe<1|2>:]AVERage:COUNt 0 to 32767. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
[SENSe<1|2>:]AVERage[:STATe<1 to 3>] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
[SENSe<1|2>:]AVERage:TYPE VIDeo | LINear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
SENSe:BANDwidth Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution] <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . 131
[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:AUTO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . 131
[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:RATio 0.0001 to 1 . . . . . . . . . . . . . . . . . . . . . . 131
[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:TYPE NORMal | FFT | CFILter | RRC . . . . . . 132
[SENSe<1|2>:]BANDwidth|BWIDth:VIDeo 1Hz to 10MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
[SENSe<1|2>:]BANDwidth|BWIDth:VIDeo:AUTO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
[SENSe<1|2>:]BANDwidth|BWIDth:VIDeo:RATio 0.01 to 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . 133
SENSe:CORRection Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
[SENSe<1|2>:]CORRection:EGAin:INPut[:MAGNitude] –200...200dB . . . . . . . . . . . . . . . . . . . . . 133
[SENSe<1|2>:]CORRection:TRANsducer:SELect <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
[SENSe<1|2>:]CORRection:TRANsducer:UNIT <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
[SENSe<1|2>:]CORRection:TRANsducer:SCALing LINear | LOGarithmic . . . . . . . . . . . . . . . . . . 135
[SENSe<1|2>:]CORRection:TRANsducer:COMMent <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
[SENSe<1|2>:]CORRection:TRANsducer:DATA <freq>,<level>.. . . . . . . . . . . . . . . . . . . . . . . . . . 135
[SENSe<1|2>:]CORRection:TRANsducer[:STATe] ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
[SENSe<1|2>:]CORRection:TRANsducer:DELete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
[SENSe<1|2>:]CORRection:TRANsducer:VIEW ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
SENSe:DETector Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
[SENSe<1|2>:]DETector<1..3>[:FUNCtion] APEak | NEGative | POSitive | SAMPle | RMS |AVERage
| QPEak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
[SENSe<1|2>:]DETector<1 to 3>[:FUNCtion]:AUTO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
SENSe:FREQuency Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
[SENSe<1|2>:]FREQuency:CENTer 0 to fmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
[SENSe<1|2>:]FREQuency:CENTer:STEP 0 to fmax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
[SENSe<1|2>:]FREQuency:CENTer:STEP:LINK SPAN | RBW | OFF . . . . . . . . . . . . . . . . . . . . . . 138
[SENSe<1|2>:]FREQuency:CENTer:STEP:LINK:FACTor 1 to 100 PCT . . . . . . . . . . . . . . . . . . . . 139
[SENSe<1|2>:]FREQuency:SPAN 0 to fmax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
[SENSe<1|2>:]FREQuency:SPAN:FULL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
[SENSe<1|2>:]FREQuency:STARt 0 to fmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
[SENSe<1|2>:]FREQuency:STOP 0 to fmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
[SENSe<1|2>:]FREQuency:MODE CW | FIXed | SWEep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
[SENSe<1|2>:]FREQuency:OFFSet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
SENSe:POWer Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
[SENSe<1|2>:]POWer:ACHannel:SPACing:CHANnel 100 Hz to 2000 MHz . . . . . . . . . . . . . . . . . 141
[SENSe<1|2>:]POWer:ACHannel:SPACing:ACHannel 100 Hz to 2000 MHz. . . . . . . . . . . . . . . . . 142
[SENSe<1|2>:]POWer:ACHannel:SPACing:ALTernate<1|2> 100 Hz to 2000 MHz . . . . . . . . . . . . 142
[SENSe<1|2>:]POWer:ACHannel:TXCHannel:COUNt 1 | 2 | 3 | 4. . . . . . . . . . . . . . . . . . . . . . . . . . 142
[SENSe<1|2>:]POWer:ACHannel:ACPairs 0 | 1 | 2 | 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth[:CHANnel] 100 Hz to 1000 MHz. . . . . . 143
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ACHannel 100Hz–1000MHz . . . . . . . . . 144
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ALTernate<1|2> 100 Hz to 1000 MHz . . 144
[SENSe<1|2>:]POWer:ACHannel:MODE ABSolute | RELative. . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
[SENSe<1|2>:]POWer:ACHannel:REFerence:AUTO ONCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
[SENSe<1|2>:]POWer:ACHannel:REFerence:TXCHannel:AUTO MINimum | MAXimum | LHIGhest
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

12
Contents
145
[SENSe<1|2>:]POWer:ACHannel:REFerence:TXCHannel:MANual 1 | 2 | 3 | 4 . . . . . . . . . . . . . . . 145
[SENSe<1|2>:]POWer:ACHannel:PRESet ACPower | CPOWer | MCACpower | OBANdwidth |
OBWidth | CN | CN0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
[SENSe<1|2>:]POWer:ACHannel:PRESet:RLEVel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
[SENSe<1|2>:]POWer:BANDwidth|BWIDth 10 to 99.9PCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
[SENSe<1|2>:]POWer:HSPeed ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
[SENSe<1|2>:]POWer:NCORrection ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
[SENSe<1|2>:]POWer:TRACe 1 to 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
SENSe:ROSCillator Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
[SENSe<1|2>:]ROSCillator:SOURce INTernal | EXTernal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
SENSe:SWEep Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
[SENSe<1|2>:]SWEep:TIME 2.5ms to 16000s (frequency domain) | 1us to 16000s (time domain) 148
[SENSe<1|2>:]SWEep:TIME:AUTO ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
[SENSe<1|2>:]SWEep:COUNt 0 to 32767 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
[SENSe<1|2>:]SWEep:EGATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
[SENSe<1|2>:]SWEep:EGATe:TYPE LEVel | EDGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
[SENSe<1|2>:]SWEep:EGATe:POLarity POSitive | NEGative. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
[SENSe<1|2>:]SWEep:EGATe:HOLDoff 125 ns to 100 s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
[SENSe<1|2>:]SWEep:EGATe:LENGth 0 to 100 s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
[SENSe<1|2>:]SWEep:EGATe:SOURce EXTernal | IFPower | RFPower . . . . . . . . . . . . . . . . . . . . 151
[SENSe<1|2>:]SWEep:POINts 125 to 8001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
STATus Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
STATus:OPERation[:EVENt]?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
STATus:OPERation:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
STATus:OPERation:ENABle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
STATus:OPERation:PTRansition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
STATus:OPERation:NTRansition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
STATus:PRESet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
STATus:QUEStionable[:EVENt] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
STATus:QUEStionable:CONDition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
STATus:QUEStionable:ENABle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
STATus:QUEStionable:PTRansition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
STATus:QUEStionable:NTRansition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
STATus:QUEStionable:FREQuency[:EVENt]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
STATus:QUEStionable:FREQuency:CONDition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
STATus:QUEStionable:FREQuency:ENABle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
STATus:QUEStionable:FREQuency:PTRansition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
STATus:QUEStionable:FREQuency:NTRansition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
STATus:QUEue[:NEXT]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
SYSTem Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator LFEOI | EOI . . . . . . . . . . . . . . . . . . . . . . . . 157
SYSTem:DATE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
SYSTem:DISPlay:FPANel ON | OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
SYSTem:DISPlay:UPDate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
SYSTem:ERRor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
SYSTem:ERRor:LIST?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
SYSTem:ERRor:CLEar:ALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Contents
13
SYSTem:PRESet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
SYSTem:TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
SYSTem:VERSion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
TRACe Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
TRACe<1|2>[:DATA] TRACE1 | TRACE2 | TRACE3 | SPURious | ABITstream | PWCDp | CTABle,
<block> | <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
TRACe:IQ Subsystem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
TRACe<1|2>:IQ:DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
TRACe<1|2>:IQ:SET <filter type>,<rbw>,<sample rate>,<trigger source>,<trigger slope>,<pretrigger
samples>,<# of samples> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
TRACe:IQ:SRATe 15.625kHz to 32MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
TRACe:IQ:STATe ON | OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
TRIGger Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
TRIGger<1|2>[:SEQuence]:SOURce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
TRIGger<1|2>[:SEQuence]:LEVel:IFPower –30 to –10DBM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
TRIGger<1|2>[:SEQuence]:LEVel:RFPower. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo 0 to 100PCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
TRIGger<1|2>[:SEQuence]:HOLDoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
TRIGger<1|2>[:SEQuence]:SLOPe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
4. A Brief Introduction to the SCPI Language
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
SCPI Language Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Command Statement Rules Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Creating Valid Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Special Characters in Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Parameters in Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Variable Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Block Program Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Putting Multiple Commands on the Same Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
SCPI Termination and Separator Syntax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

14
Contents
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

15
1 Getting Started
This chapter gives a quick overview of the N9062A & W9062A SCPI Language Compatibility
application on Agilent X-series analyzers.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

16
Getting Started
What Does the Agilent N9062A & W9062A SCPI Language Compatibility Application Do?
What Does the Agilent N9062A & W9062A SCPI
Language Compatibility Application Do?
The Agilent N9062A & W9062A SCPI Language Compatibility application is designed to allow
X-Series signal analyzers (including CXA, EXA, MXA and PXA) to be controlled using the SCPI
programming commands (as known as SCPI commands, or SCPI) from the following Rohde & Schwarz
(R&S) instruments:
• R&S FSE
• R&S FSP
• R&S FSU
The X-Series analyzer with the N9062A/W9062A application installed is able to emulate the
FSE/FSP/FSU measurement functions as closely as possible in many automated systems with minimal
or no modification to the currently used measurement software.
The N9062A/W9062A application supports over 300 SCPI commands from the FSE/FSP/FSU
instruments and 16 of IEEE488.2 standard SCPI commands.
NOTE The N9062A/W9062A application supports commands from the Spectrum
Analyzer (default) mode. Commands from other options or modes are not
supported.
The N9062A/W9062A does not support the same front panel operations, user
interface and measurement screen display as the FSE/FSP/FSU instruments.

The N9062A/W9062A does not support the Split Screen feature.

The N9062A/W9062A partly supports Channel Power measurements, OBW
measurements, ACP measurements and IQ traces.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

17
Getting Started
Documentation for the N9062A & W9062A SCPI Language Compatibility application
Documentation for the N9062A & W9062A SCPI
Language Compatibility application
Signal Analyzers with N9062A/W9062A
When you purchase your X-Series signal analyzer with the SCPI Language Compatibility application,
this manual - the N9062A & W9062A SCPI Language Compatibility Guide (N9062-90001) is included
on the documentation CD.
For information on PXA series analyzers and other related documentation, refer to the PXA web site at
http://www.agilent.com/find/pxa.
For information on MXA series analyzers and other related documentation, refer to the MXA web site at 
http://www.agilent.com/find/mxa.
For information on EXA series analyzers and other related documentation, refer to the EXA web site at 
http://www.agilent.com/find/exa.
For information on CXA series analyzers and other related documentation, refer to the CXA web site at 
http://www.agilent.com/find/cxa.
This SCPI Language Compatibility Guide is not designed to be a comprehensive guide to all SCPI
commands. It gives brief descriptions of the supported commands, and highlights important functional or
behavioral differences that you should be aware of when transferring your existing code to your X-Series
analyzer. For a fuller description of these SCPI commands, refer to the manuals supplied with your
original analyzer.
Signal Analyzer Updates
For the latest information about this instrument, including software upgrades, application information,
and product information, please visit the URL above.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

18
Getting Started
SCPI Language Compatibility Application General Rules and Limitations
SCPI Language Compatibility Application General
Rules and Limitations
The N9062A/W9062A application has been designed to emulate the remote operation of the R&S
FSE/FSP/FSU instruments for the most commonly used commands needed for basic spectrum analyzer
functions. It is not an absolute direct replacement for these instruments in all cases, and does not support
instrument modes beyond the core spectrum analyzer. It also does not emulate the local front-panel
interface (buttons) and display as used for manual operation.
Couplings
The N9062A/W9062A application uses the auto coupling features of the X-Series analyzers, and may be
slightly different from the FSE/FSP/FSU. To eliminate the possibilities of "Meas Uncal" errors between
auto and manual values, values will default to the X-Series auto settings where applicable (for example
resolution bandwidth).
The parameter’s default value is adjusted to match that of the FSE/FSP/FSU unless otherwise stated.
Data Formats
N9062A/W9062A application supports data formats defined for the X-Series analyzers. For more
information, see SA Programmer’s Guide.
Markers
The N9062A/W9062A application emulates the behavior of FSE/FSP/FSU instruments.
Numeric Ranges
Numeric ranges are limited to that of the X-Series analyzers unless otherwise stated. For more
information about X-Series numeric ranges, see SA Programmer’s Guide.
Remote Control
The N9062A/W9062A application in X-Series signal analyzers supports remote operation through the
following interfaces: GPIB, LAN, USB or Telnet.
Returning Data
Data returned in response to a command or query is defined in the following Chapter 3 , “Compatible
SCPI Commands,” on page 37, unless otherwise stated. For more information about X-Series data
returning, see SA Programmer’s Guide.
The data returned from queries, especially from a trace query, match the FSE/FSP/FSU for the most
common data formats (ASCII, Binary 32).
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

19
Getting Started
SCPI Language Compatibility Application General Rules and Limitations
Units
The N9062A/W9062A application supports the following standard units. Any units supported by
FSE/FSP/FSU commands that are not supported by the application are noted in the table and details
found in Chapter 3 , “Compatible SCPI Commands,” on page 37.
Frequency Units: HZ, KHZ, MHZ, GHZ
Amplitude Units: DB, DBM, DBUV, DBMV, DBUA, V, A, W
Time Units: KS, S, MS, US, NS
Status System & SRQ
The STATus subsystem is a remote-only command structure that allows a controller to determine the
operating status of the instrument. The system can also allow the instrument to request service from the
controller on an interrupt basis. The system is a complex hierarchy, where specific details of an
instrument’s condition are summarized upward to higher level registers. The use of this system is
optional, and your programs may vary widely in the depth to which you use it.
The topmost Status Byte Register, Standard Event Status Register, and their SRQ behavior, are specified
by IEEE 488.2 standard. The N9062A/W9062A application adopts the Status system of the Agilent
X-Series analyzers, which conforms to the IEEE 488.2 standard and behaves like that of any
IEEE488.2-compliant instrument (including the FSE, FSP, or FSU). These status conditions, events, or
commands should emulate any compliant instrument, for example:
• operation complete, *OPC and *OPC?
• Status Byte bits, including Error/Event reporting, plus *CLS, *STB
• Standard Event Status Register bits, plus *ESE, *ESR, *PSC
• SRQ behavior and *SRE mask
• most error conditions (top level), plus STATus:QUEue? and SYSTem:ERRor? queries
• use of STATus:OPERation and STATus:QUEStionable commands, although specific bits may be
mapped differently
At lower levels of details, different vendors have implemented their status systems differently.
Therefore, if a program (written for FSE/FSP/FSU) makes deep or sophisticated use of the status
subsystem, it may not run correctly with N9062A/W9062A and so require modification. The top
differences include (but are not limited to) the following:
• RF & IF Overload condition
• parallel polling, IST-flag (Individual Status), and PPE (Parallel Poll Enable) mask
• limit or limit margin mask failure reporting
• sweep break feature (of a multi-sweep measurement)
• specific error message numbers, specific error message text
• status conditions associated with Screen B (specifically)
For more information about the X-Series Status system, see SA Programmer’s Guide.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html