Assembly and Operating Instructions Ver. 1 06/2012 (2321)
2
INTRODUCTION
Thank you for purchasing the Nose Cut-Out Cup from Aidapt.
Please examine your product for any visible damage before using/installing. If you see any damage or suspect a fault, please
do not use, but contact your supplier.
INTENDED USE
The Nose Cut-Out Cup is designed for users who have difficulty tilting their head back.
CLEANING
The Nose Cut-Out Cup should be cleaned using a non-abrasive cleaner or mild detergent with a soft cloth only. Abrasive
cleaners or abrasive cleaning pads may seriously damage the product beyond repair and should not be used. Always ensure
that you wipe dry the equipment.
If to be disinfected by heat, one of the following three temperatures and duration of exposition can be used:
a) a temperature of 90°C for 1 minute
b) a temperature of 85°C for 3 minutes
c) a temperature of 80°C for 10 minutes
MAINTENANCE
Please check the cup periodically for any signs of damage and if in doubt contact your supplier.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for service support.
TECHNICAL INFORMATION
Width 76 mm
Depth 54 mm
Height 121mm
Net Weight 0.024kg
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or other
commitment by Aidapt Bathrooms Limited or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the user you must accept
liability for safety when using the product.
A copy of the instructions leaflet can be downloaded from our website.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 •Fax: +44 (0) 1744 745 001 •Web: www.aidapt.com
