aidapt VG888 Manual

Anti-fall Barrier PU Foam
VG888
Fixing and Maintenance Instructions

INTRODUCTION
Thank you for purchasing the Anti-fall Barrier PU Foam.
Please examine your product for any visible damage before using/installing. If you see any damage or suspect afault,
please do not use, but contact your supplier.
BEFORE USE
Remove from packaging, unroll and allow the foam to return to its full shape. This may take 2 hours.
Please note all new materials have their own particular smell, which will gradually disappear.
ASSEMBLY AND OPERATING INSTRUCTIONS
Place the barrier as required on the edge of your mattress under deep fitted sheets. The anti skid silicone beaded
material ensures the barrier stays in place.

WARNING:
It is recommended that a risk assessment be undertaken as to the suitability of the barrier for each individual
user or if used with any bed rails or other equipment.
TECHNICAL INFORMATION
Length = 1344mm
Height = 120mm
Width = 190mm
Net weight = 1.2kg (2.7lbs)
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or
other commitment by Aidapt Bathrooms Limited or its agents or its subsidiaries and no warranty or representation
concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the user you must
accept liability for safety when using the product.
A copy of the instructions leaflet can be downloaded from our website which can be enlarged if required.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: [phone] •Fax: [phone] •Web: www.aidapt.com
Email: [e-mail]
1. Water resistant cover with silicone beaded fabric.
2. Must be used with deep fitted sheets.
3. Suitable for use on all bed sizes - Single, Double, King, Super King, Queen.
4. Simple to fit between the mattress and fitted sheet.
5. Removable cover is machine washable up to 60°C
6. DO NOT use bleach to clean the product, drip dry and do not iron.