Aike AK1333 User manual

AK1333Model DC3.7V (Lithium battery,using
Type-C charging interface)
Power Supply
Sensing Distance
Liquid Supply
Waterproof
Volume
Dimension
Net Weight
280ml
121×77×186mm
3-7cm
1.0-3.0ml
IPX40.48kg
Indicator light
Outlet nozzle
Induction window
Body
On-off button
Charging interface
Annotation：
Subject to the actual object
Top cover
Automatic Soap Dispenser
AK1333
E-mail : [email protected]
Manufacturer
Zhejiang Aike Appliances Co., Ltd.
Yong’an Industry Zone, Xianju, Taizhou City, 317306 Zhejiang, China
Importer
Zhejiang Aike Appliances Co., Ltd.
www.zjaike.com
186mm
77mm 121mm

Warning
Minors please use this product with a guardian to prevent
eating soap by mistake!
This machine contains microcomputer and other precision
electronic circuits. It is strictly forbidden to shower！
Machine X 1 Type-C X 1 Product Certificate X 1 User Manual X 1
1. Open the upper cover, pour in the soap, if there is overflow, please
wipe it clean.
2. Long press the on-off button on the back of the machine for more than
two seconds, the indicator light will turn white ,which means the machine
come into operation. Long press the on-off button to switch between on
and off, and the indicator light will turn orange when machine is turned
off.
3. Put your hand under the sensor. When the sensor receives the signal,
the LED indicator will light up and the soap will flow automatically.
4. It must be repeatedly sensed for many times until the soap flows out
normally at the first time of using.
5. When the battery voltage is lower than 3.3V, the indicator light will flash
orange to remind charging as soon as possible. The conventional 5V
charging plug needs to be provided by yourself.
Long press the on-off button for more than 2 seconds, the machine
turns on when light flash white and the liquid output of the machine is
set by default.
The factory default liquid output is about 1.0ml (the liquid output is
measured with water as the liquid). After pressing the on-off button
once, the liquid output changes to about 2.0ml (the indicator light
flashes twice). After pressing the button again, the liquid output
changes to about 3.0ml (the indicator light flashes three times).
Pressing the button three times again changes to the factory default
setting. This cycle repeats.
1. Before first installation, if there is any discrepancy with the packing list,
please contact the local dealer or manufacturer in time.
2. The specifications of some accessories are subject to change without
prior notice. For problems that cannot be solved during installation,
please contact the dealer or manufacturer in time.
3. The main parts are packed in special bags. Please don't collide and rub
excessively during handling and unpacking to avoid damage.
On-off button
On-off button
AK-1333-YYSMS-001