Aimco 2000 SERIES User manual

AcraDyne
Operations Manual
Parts Exploded View
2000 SERIES NUTRUNNERS
PO Box 16460, Portland OR 97292-0460 • 503-254-6600 • Fax [phone] • www.aimco-global.com

OPERATIONS
Angle Head Tool Body Light
Ring
Start
Lever
Cable
Connection
Square
Drive
1. Connect the tool cable to the Evolution controller and the tool:
Be sure the female end of the tool cable is connected to the tool and the male end of the tool cable is
connected to the controller. When connecting these, you'll see two alignment pins - one on the cable and
one on the tool or controller. Just align these two pins 180 degrees apart from each other and insert the
alignment pins into the matching holes. Once snug, twist the metal outer casing clockwise until it is tight.
2. Light Ring Operation:
The light ring controls the direction of the tool rotation and can activate an auxiliary control. The ring has
three positions - fully clockwise, center and fully counter-clockwise. The factory setting for each position is
• Clockwise position - forward rotation
• Center position - reverse rotation
• Counter-clockwise position - no rotation
Each position can be programmed individually using AcraDyne Toolware software. The auxiliary setting can
be used to advance to the next parameter set or other functions as programmed later.
3. Start Lever Operation:
To start the tool, simply depress the lever. The permanently mounted magnet on the underside of the handle
will activate the start circuit. When the tool reaches torque, the tool will stop automatically.
A complete tool system
consists of the
following items:
Nutrunner
Controller
Tool Cable
3

4
2000 SERIES ANGLE NUTRUNNERS - OVERALL ASSEMBLY
ITEM # AEN AEN AEN AEN AEN QTY. PART # DESCRIPTION
2015 2025 2030 2040 2055
1 X X X X X 1 20106 2000 MOTOR HAN LE HOUSING
2 X X X X 1 21251 2000 MOTOR / I BOAR ASSEMBLY
X 1 21270
3 X X 1 21145 12T SUN GEAR
4 X 1 21169 GEARTRAIN ASSEMBLY
5 X 2 20864 BELLEVILLE WASHER
6 X 1 21679 ANGLE HEA / GEARTRAIN ASSEMBLY
X 1 21069
X 1 21947
X 1 21078
X 1 20867 ANGLE HEA ASSEMBLY
7 X X X X X 2 20115 BELLEVILLE WASHER
8 X X X X 2 20116 PIN
X4
9 X X X X X 2 20532 SCREW
10 X X X X X 1 20020 LABEL
11 X X X X X 2 21205 O-RING
12 X X X X X 2 20535 OWEL
13 X X X X X 1 20300 REVERSE / LIGHT RING ASSEMBLY
14 X X X X X 1 20092 SET SCREW
15 X X X X X 1 20132 SPRING
16 X X X X X 1 20149 THROTTLE LEVER ASSEMBLY
17 X X X X X 2 20061 SCREW
18 X X X X X 1 20533 CALIBRATION ECAL

5
2000 SERIES IN-LINE NUTRUNNERS - OVERALL ASSEMBLY
USE ONLY ON AEM-2038 / 2068
AEM-2010 / 2020 / 2025 IN-LINE HEA S
ITEM # AEM AEM AEM AEM AEM QTY. PART # ESCRIPTION
2010 2020 2025 2038 2068
1 X X X X X 1 20106 2000 MOTOR HAN LE HOUSING
2 X X X X 1 21251 2000 MOTOR / I BOAR ASSEMBLY
X 1 21270
3 X X 1 21145 12T SUN GEAR
4 X 1 21169 GEARTRAIN ASSEMBLY
X 1 21141
5 X X 2 20864 BELLEVILLE WASHER
6 X 1 21170 IN-LINE HEA / GEARTRAIN ASSEMBLY
X 1 21943
X 1 20450
X X 1 20877 IN-LINE HEA ASSEMBLY
7 X X X X X 2 20115 BELLEVILLE WASHER
8 X X X 2 20116 PIN
XX 4
9 X X X X X 2 20532 SCREW
10 X X X X X 1 20020 LABEL
11 X X X X X 2 21205 O-RING
12 X X X X X 2 20535 OWEL
13 X X X X X 1 20300 REVERSE / LIGHT RING ASSEMBLY
14 X X X X X 1 20092 SET SCREW
15 X X X X X 1 20132 SPRING
16 X X X X X 1 20149 THROTTLE LEVER ASSEMBLY
17 X X X X X 2 20061 SCREW
18 X X X X X 1 20533 CALIBRATION ECAL
19 X X X X X 1 20437 REACTION BAR
20 X X X X X 1 20454 FIXTURE / RETAINER NUT

6
USE ONLY ON AEP-2038 / 2068
AEP-2010 / 2020 / 2025 PISTOL HEA S
ITEM # AEP AEP AEP AEP AEP QTY. PART # ESCRIPTION
2010 2020 2025 2038 2068
1 X X X X X 1 20346 2000 MOTOR HAN LE HOUSING
2 X X X X 1 21247 2000 MOTOR ASSEMBLY
X 1 21269
3 X X X X X 2 20115 BELLEVILLE WASHER
4 X 1 21169 GEARTRAIN ASSEMBLY
X 1 21141
5 X X 2 20864 BELLEVILLE WASHER
6 X 1 21170 IN-LINE HEA / GEARTRAIN ASSEMBLY
X 1 21943
X 1 20450
X X 1 20877 IN-LINE HEA ASSEMBLY
7 X X X 2 20116 PIN
X X 4 20116 PIN
8 X X X X X 1 21105 PC BOAR -HEA LAMP
9 X X X X X 1 21303 PC BOAR - ISPLAY
10 X X X X X 1 20762 CAP PLUG
11 X X X X X 1 20816 LABEL
12 X X X X X 1 20671 TOP COVER / CABLE RESTRAINT
13 X X X X X 2 20757 SCREW
14 X X X X X 1 20758 SCREW
15 X X X X X 1 21301 I PCB ASSEMBLY
16 X X X X X 2 20729 SCREW
17 X X X X X 1 20292 8' WHIP TOOL CABLE
18 X X X X X 1 20674 HAN LE COVER / CABLE RESTRAINT
19 X X X X X 2 20760 SCREW
20 X X X X X 1 20677 REVERSE LEVER
21 X X X X X 1 20810 REVERSE PIN/MAGNET ASSY.
22 X X X X X 1 20676 THROTTLE/REVERSE BUSHING
23 X X X X X 1 20768 SCREW
24 X X X X X 1 20809 THROTTLE PLUNGER ASSY.
25 X X X X X 1 20751 SPRING
26 X X X X X 1 20746 SPRING
27 X X X X X 1 20975 ETENT BALL
28 X X X X X 1 20745 THROTTLE/TRIGGER BUTTON
29 X X X X X 1 20749 ROLL PIN
30 X X X X X 1 20747 ROLL PIN
31 X X X X X 1 20533 CALIBRATION ECAL
32 X X X X X 2 21279 BUSHING
33 X X X X X 1 21278 HANGER ASSEMBLY
34 X X X X X 1 20437 REACTION BAR
35 X X X X X 1 20454 FIXTURE/RETAINING NUT
6
2000 SERIES PISTOL NUTRUNNERS - OVERALL ASSEMBLY
6
2000 SERIES PISTOL NUTRUNNERS - OVERALL ASSEMBLY

Corporate Headquarters
10000 S.E. Pine St. 1204 E. Maple Rd. Verlaine 706, Col. Obispado
Portland, OR 97216 Troy, MI 48083 Monterrey NL CP 64040,
Mexico
[phone] [phone] 52-81-8333-6447
FAX [phone] FAX [phone] FAX [phone]
LIT-AD131
Printed in USA