Aircat 808-22 Datasheet

MODEL: 808-22
3/8” Long Reach Ratchet

SPECIFICATIONS
Important Warnings - Ratchets
1. Eye protection and hearing protection and safety gloves must always be worn when operating an impact wrench or impact
driver.
2. When using heavy impact sockets or sockets on impact wrenches with 3/4” drive anvils or larger, a socket retaining ring
and pin should be used to prevent the socket falling off and causing injury.
Accessory Hazards
3. Disconnect the assembly power tool for threaded fasteners from the energy supply before changing the inserted tool or
accessory.
4. Do not touch sockets or accessories during impacting as this increases the risk of cuts, burns or vibration injuries.
5. Use only sizes and types of accessories and consumables that are recommended by the assembly power tool for threaded
fasteners manufacturer; do not use other types or sizes of accessories and consumables.
Tools of this class operate on a wide range of air pressure. It is recommended that air pressure of these tools measures 90 PSI at the tool while running free. Higher
pressure and unclean air will shorten the tool’s life because of faster wear and may create a hazardous condition and void the warranty. Water in the air line will
cause damage to the tool. Drain the air tank daily. Clean the air inlet lter screen on at least a weekly schedule. The recommended hookup procedure can be viewed
in the illustration below. The air inlet, used for connecting air supply, has standard 1/4”NPT American Thread. Line pressure should be increased to compensate for
unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8”I.D. and ttings should have the same inside dimensions.
Free Speed
(RPM)
Bolt Capacity
(in.)
Square
Drive
(in.)
Maximum
Torque
Weight
(lbs.)
Length
(in)
Air Cons.
(CFM)
Rec. Hose
Size
(in.)
Air Inlet
(in.)
160 1/2 3/8 65 ft-lb 4.3 22.5 3 3/8 1/4 NPT
ADVERTENCIA: Este producto puede exponerlo a sustancias
químicas, incluyendo plomo, los cuales son conocidos por el Estado
de California como causantes de cáncer y defectos de nacimiento u
otros daños reproductivos. Para obtener más información vaya a
www.P65Warnings.ca.gov

MODEL: 808-22
3/8” Long Reach Ratchet
Exploded View & Parts List
REF# PARTS NO PARTS NAME REF# PARTS NO PARTS NAME
101 12302-1009202-1 HOUSING(Aircat) 212 2040300-09010-0 C - RING
102 12305-1004701-1 VALVE STEM 213 1231D-1004701-1 DRIVE BUSHING
103* 2041100-01040-0 O - RING 214 12322-1014703-1 MOTOR SHAFT BALANCER
104* 1230J-1000006-1 VALVE STEM SPRING 215 1230Y-1014711-1 RATCHET HOUSING
105 12397-1004701-1 DISCHARGE VALVE SEAL 216 1230K-1000003-1 LATCH SPRING BUSHING
106 2041102-04050-0 O - RING 217 1239J-1014702-1 EXTONSION POLE
107 12352-1004701-1 OUTLET CONTROLLER 218 1232Y-1014702-1 DEEP IMPACT SOCKET 1
108 12310-1004704-1 TRIGGER 219 12321-1004701-1 LOCK RING
109 1236D-1004701-1 PIN 220 12241-1010006-1 PLAENT CAGE ASSY
110 12309-1004708-1 AIR INLET 221 1231B-1000001-1 PLANET GEAR
111 1135V-0000007-1 AIR PLUG 222 1231A-1004701-1 INTERNAL GEAR
201 1231H-1004703-1 REVERSE LEVER 301 1230J-1004701-1 LOCK WASHER
202 12340-1004701-1 ANVIL WASHER 302 2041200-00021-0 BEARING
203 1231F-1014701-1 ANVIL 303 12312-1000001-1 FRONT PLATE
204 1230J-1000001-1 THRUST WASHER SPRING 304 12315-1000003-1 CYLINDER
205 2040800-02010-0 BALL 305* 12314-1000001-1 BLADE
206 1230J-1000002-1 REVERSE SPRING 306 12313-1000001-1 ROTOR
207 1230B-1004701-1 REVERSE PIN 307 2040400-02030-0 SPRING PIN
208 1231G-1000001-1 RATCHET PAWL 308 12316-1000001-1 REAL PLATE
209 1230B-1000001-1 PLANET PIN 309 2041200-00013-0 BEARING
210 1231E-1004701-2 YOKE 310 1230X-1004701-1 HOUSING COVER
211 12378-1014701-1 THRUST WASHER