Airflow 90001459 User manual
Installation, operation, and maintenance
manual
Part No. 90001459/90001460
Purigo M650/M850
Please keep this manual with the product
80001028 –Issue 1 10/21
2
Contents
1.0 General Information...................................................................................................3
1.1 Safety Information....................................................................................................3
1.2 Warranty Claims ......................................................................................................4
1.3 Regulation Guidelines..............................................................................................4
1.4 Intended Use............................................................................................................4
1.5 Receipt.....................................................................................................................4
1.6 Storage....................................................................................................................4
1.7 Shipping...................................................................................................................5
2.0 Disposal .....................................................................................................................5
2.1 Filter Disposal..........................................................................................................5
2.2 Electrical Connection ...............................................................................................5
2.3 Recycling.................................................................................................................5
3.0 Technical Information ...............................................................................................6
4.0 Installation .................................................................................................................8
4.1 Unboxing..................................................................................................................8
4.2 Installation Location .................................................................................................8
4.3 Mobility.....................................................................................................................8
4.4 Electrical Connection ...............................................................................................8
5.0 Operation ...................................................................................................................9
5.1 Operating the Power................................................................................................9
5.2 Speed Control..........................................................................................................9
6.0 Maintenance and Service........................................................................................10
6.1 Important safety information...................................................................................10
6.2 Maintenance Schedule...........................................................................................11
6.3 Components...........................................................................................................11
6.3 Filters.....................................................................................................................12
Notes..............................................................................Error! Bookmark not defined.
80001028 –Issue 1 10/21
3
1.0 General Information
Section 1 contains essential information about the operation of the unit, warnings and safety,
warranties, regulation guidelines, intended use, receipt, storage and shipping of the unit.
1.1 Safety Information
All essential safety information must be followed! A typical example of how a safety critical
warning is given will be displayed below. Typically, these are displayed In red box however
no guarantee every user safety warning will be displayed in the same way. Use common
sense and good judgement and never install or operate the unit if not properly qualified to do
so.
Special Regulations apply for use, connection, operation, transportation, and maintenance.
Consultation is needed in case of any doubt about requirements to safely carry out work.
Consult the relevant regulations and health and safety standards of your organisation or
seek expert advice. When carrying out maintenance, repair, installation, and any other work,
Airflow Developments recommends the following safety equipment be used:
•Protective glasses to protect against eye injuries.
•Ear protectors to protect against all kinds of noise.
•Hair net and protective clothing to guard against contact with moving parts. Do not wear
rings, chains, or other jewellery.
•Protective mask protects the airways from small particles, dust, pollen, bacteria, and
viruses.
•Protective gloves serve to protect the hands against rubbing, abrasions, cuts or more
injuries, as well as contact with hot surfaces.
•Protective footwear serves to protect against heavy falling parts and from slipping on
slippery surfaces.
Danger: Always pay close attention to danger and warnings signs. To not
do so could cause serious personal injury, death, and damage to the
product and property.
Warning: For all work on the Purigo M 650 and M 850, the applicable
general safety at work and accident prevention regulations must be
observed! The following must be observed before all cleaning and
maintenance work or before opening the terminal compartment:
1. All safety features like fuses, etc. must be correctly fitted and can
only be removed for maintenance and repair jobs by skilled and
authorized service engineers. Isolate the unit from the mains power
supply and secure against unintended restart! –The rotating parts
must first come to a standstill! –Once the rotating parts come to a
standstill, a waiting time of 5 minutes must be observed, as
dangerous voltages may be present due to internal capacitors, even
after isolation from the power supply!
2. All plant-related safety regulations must be observed! If applicable,
further country-specific regulations must also be observed!
3. Protection against contact must be ensured pursuant to BS EN ISO
13857:2008 when installed! Contact with rotating parts must be
avoided.
4. A uniform inflow and free outlet must be ensured!
80001028 –Issue 1 10/21
4
1.2 Warranty Claims
Any warranty, guarantee or offer provided by Airflow Developments shall not apply if the
instructions are not observed. The use of accessories, add-ons or other interactions which
are not recommended or offered by Airflow developments is not permitted. Any damage or
issues that may occur from misuse, unauthorized tampering or modification with the unit is
not liable for warranty. “Unit” shall refer to all items in the scope of this delivery. Upon
successful delivery the unit is considered correct. If modification, tampering or adjustment
has been done without the express instruction of Airflow Developments staff or authorized
technicians, your warranty and guarantee is considered breached if issues arise from this.
1.3 Regulation Guidelines
If the product is installed correctly and used to its intended purpose, it conforms to all
applicable regulations and directives at its date of manufacture as per its declaration of
conformity document. Upon delivery it is recommended that a manager or user check the
unit for breaches of relevant safety legislation that occurred in transit and then raise any
issues with the transport company if issues are found.
1.4 Intended Use
Purigo M 650 and M 850 are designed to be used in a typical residential/commercial
environment. It is for indoor use only and works with 230V AC supply from a normal utility
socket. It can be used for filtering indoor air by means of recirculating it and removing the
small particles, dust, pollen, bacteria, and viruses with the help of air filters. Any use other
than the intended use is prohibited!
Do not use the unit at a relatively humidity higher than 70%.
Do not use the unit at temperatures below 5°C and above 40°C.
Do not operate the unit with different utility/mains power then listed on this manual.
1.5 Receipt
The delivery contains the air purifier unit. The scope of delivery also includes the items
below as the assembly kit:
•Power supply cable, 1 piece
•The materials above are attached to the service panel of the unit with adhesive tape.
Please check delivery immediately on receipt for accuracy and damage. If damaged, please
notify the carrier immediately. In case of delayed notification, any possible claim may be
void.
1.6 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging
influences: Protection by dry, air-dustproof packing (plastic bags with drying agent and
moisture indicators). The storage place must be waterproof, vibration-free, and free of
temperature variations (ambient temperature limit min/max 0°C/ +40°C). Damages due to
improper transportation, storage or commissioning must be verified and are not liable for
warranty.
80001028 –Issue 1 10/21
5
1.7 Shipping
All manufactured devices are shipped from the factory after all tests and checks have been
carried out before shipment. The shipping must be carried out by trained and experienced
personnel and the necessary safety precautions should be taken to prevent the overturning
and slipping of the device. When shipping the devices, it should be ensured that the weight
is evenly distributed over the four corners and not unbalanced.
Packaging information Is displayed below:
Table 1: Packaging Information
Model
Packed
Quantity
Box Dimensions (LxWxH)
(mm)
Weight(Kg)
90001459
1
410x355x1045
42
90001460
1
560x515x1160
48
2.0 Disposal
In section 2.0 information about the safe and responsible disposal of the unit is included.
Dispose of all components and filters in an environmentally friendly manner in accordance
with the local codes, practices, and guidelines. An authorized specialist waste processing
company must dispose of the unit or the individual components. The appointed contractor
must ensure that the components are separated according to material type.
2.1 Filter Disposal
The filters of the unit can be considered toxic and harmful to the environment once they are
due for replacement. Please dispose of these in the most appropriate manner to the local
authority.
2.2 Electrical Connection
The product does not contain batteries, in the event of the failure of the unit try a different
plug and dispose of the one that came with the unit in a manner that is acceptable to the
local authority. It can be disposed as you would any other retail plug.
2.3 Recycling
Metal components of the product may be recycled, always check with your local disposal
outlet which parts can or can’t be recycled in your area.
Warning: When transporting the unit, carefully observe its behavior and
stay clear of any possible hazardous areas. It must be ensured that the
means of transport/lifting is suitable to accommodate the required weight
and size capacity. Never stand beneath suspended loads. Never try to lift
weight you cannot reasonably carry. Watch hands and fingers when lifting
or dropping the box to its side. Be careful in the transportation of the unit
that it is not dented in transit.
80001028 –Issue 1 10/21
6
3.0 Technical Information
Section 3 contains the technical parameters of the unit. Table 3 and 4 detail the values of
each setting when adjusted at the potentiometer.
Table 2: General Specification
Specification
M850
M650
Airflow Volume(m3/h)
160-850
100-650
Control
Stepless
Stepless
Noise Level(dBa)
27-58
28-61
Product Dimensions(mm)(HxWxD)
1138x515x460
1024x363x307
Product Weight(Kg)
40
35
Packaged Dimensions(mm)(LxWxD)
560x515x1160
410x355x1045
Packaged Weight(Kg)
48
42
Max power consumption(W)
170
170
Max power consumption(A)
1.7
1.7
Voltage(V)
230/50/60
230/50/60
Filters(HEPA)
H14
H14
Filters (EPM)
ePM10(70%)
ePM10(70%)
Table 3: Technical Specification
Specification
M850
M650
Airflow Volume min(m3/h)
160
100
Airflow Volume max(m3/h)
850
650
Max covering area(m2)
71
54
Sound Power(Min.)(dBa)
34
35
Sound Power(Max.)(dBa)
66
69
Acoustic Pressure (min.)(dBa) 1m
26
27
Acoustic Pressure at Max (dBa) 1m
58
61
Power Max(W)
168
166
Voltage(V)
230
230
Amps(A)
1.7
1.7
Frequency(Hz)
50
50
Height
1139
1024
Width
515
363
Depth
461
307
Weight(Kg)
40
35
Protection IP Rating
20
20
Body Construction
Mobile
Mobile
Filter 1
ePM10 70%
ePM10 70%
Filter 2
HEPA14
HEPA14
Control
Stepless
Stepless
Colour of body
White
White
80001028 –Issue 1 10/21
7
Table 4: M850 Setting levels
M850
Adjustment levels
Air
Volumes(m3/h)
Noise level at
1m(dBa)
Power(W)
20
0-140
26
4
25
140-200
30
6
30
200-250
32
9
35
250-315
36
13
40
315-365
39
18
45
365-420
42
24
50
420-490
45
36
55
490-530
47
45
60
530-590
50
60
65
590-650
52
78
70
650-700
54
97
75
700-768
56
125
80
768-815
57
149
85
815-830
57
160
90
830-844
58
168
95
844-844
58
168
100
844-844
58
168
Table 5: M650 Setting levels
M650
Adjustment levels
Air Volumes(m3/h)
Noise level at 1m(dBa)
Power(W)
20
0-90
27
4
25
90-140
32
6
30
140-180
37
8
35
180-200
39
12
40
200-270
43
17
45
270-310
46
24
50
310-350
48
32
55
350-400
51
44
60
400-460
53
59
65
460-490
55
74
70
490-535
57
93
75
535-575
58
114
80
575-625
59
143
85
625-640
60
155
90
640-651
61
166
95
651-651
61
166
100
651-651
61
166
80001028 –Issue 1 10/21
8
4.0 Installation
Section 4 contains information about the installation of the product into its intended area of
operation. It contains information about the installation location, mobility, electrical
connection, and unboxing.
4.1 Unboxing
The product will come in a cardboard box which can be disposed of and recycled. Ensure
this manual is kept with the unit. The unit will not come upright, and it is not
recommended the product is unboxed this way in case it may fall. Move the box to the
intended location of install using a suitable means. If the unit is too heavy, use 2 people or
suitable machinery such as a pallet mover. If for any reason, the box is damaged and
preventing transport, consult section 1.2 and 1.5 of this document. In this case, the product
may be removed from the box, upright it and wheel it to the desired location using the mobile
wheels at the bottom of the unit.
4.2 Installation Location
The Purigo M 650/850 air purifiers must be placed in a vertical position in such a way that
the air inlets and air outlets of the apparatus are not blocked by obstacles and a clear air
distribution path is guaranteed. The unit is intended to be stood on its wheels. Do not seal
the unit in place as the back will need to be accessed for maintenance. Do not put the unit in
a location which will exceed its maximum temperature tolerances. Do not place the unit in
areas which are to be kept clear for any reason, such as a fire exit. Allow easy access for
adjustment of the potentiometer. Do not place the unit inside a cupboard, wardrobe, or
cabinet. Do not rest heavy objects on the unit or use it to hold other objects in place. It is
recommended to not place the unit where there is a danger of it falling from a great height.
Do not place the unit in water or submerge it. Do not concrete the unit in place or install into
a wall, floor or ceiling.
4.3 Mobility
The Purigo M series has wheels at the base of the unit which allow free movement. These
wheels can be locked by pressing down on the handles on the top of the wheels. When the
unit is to be moved, unlock these wheels again. Do not attempt to move the unit when the
wheels are locked.
4.4 Electrical Connection
The electrical connection is made by plugging in the power cable to the back of the unit and
inserting the plug into a mains power socket. The black power switch on the back of the unit
will turn power on and off. Do not run the electrical connection through water using a cable
extender or any other cable. Ensure the plug and plug socket is safe and electrically secure
BEFORE operation or plugging in the unit. Never attempt to force the wrong plug type into
the power connection. Always check the plug is compatible with the product before
attempting to install.
80001028 –Issue 1 10/21
9
5.0 Operation
Section 5 contains information about the operation of the unit and includes the correct
operation of the potentiometer, speed control and an explanation of the labels that are
present on the unit.
5.1 Operating the Power
The fan is directly controlled by the speed controller (potentiometer). Push the rotary control
inwards to power the unit. The blue LED indicates the unit is running. The unit cannot be
switched on or off by pressing the blue button, it is for indication purposes only, the
potentiometer must be pressed in to power on the unit. Switch the switch down on the back
of the unit to engage the plug power supply.
5.2 Speed Control
Turn the knob of the potentiometer clockwise to increase the speed and the airflow. Turn the
potentiometer anti-clockwise to decrease it. The adjustment levels with power draw and
airflow rates can be seen in section 3.0, Table 3 and 4 of this document. Comfort is intended
to be the everyday operating speeds, and boost for short periods of increased purification.
Danger:
Danger to life due to electric shock. An electric shock can result in
death or serious injury. The unit must be fully isolated from the mains power
supply before all maintenance work and before opening the terminal
compartment!
•
Do not operate the unit without a proper electrical grounding/earthing.
•
Make sure the unit is connected to a power supply with a 30 mA
individual RCD.
•
Always disconnect the unit power supply before performing any service
or maintenance work.
Warning: Make sure to use protective gloves and a protective mask (min.
FFP2) BEFORE performing service and/or maintenance work.
Figure 1:Speed control potentiometer
80001028 –Issue 1 10/21
10
6.0 Maintenance and Service
Section 6 contains all the necessary service and maintenance information for the unit.
Included in this section is the relevant safety information, a weekly, monthly, and yearly
maintenance plan, and information about component maintenance and filter maintenance.
6.1 Important safety information
Please read and understand this section fully before continuing with maintenance work.
Airflow Developments recommends the following safety equipment be used before carrying
out work.
•Protective glasses to protect against eye injuries.
•Ear protectors to protect against all kinds of noise.
•Hair net and protective clothing to guard against contact with moving parts. Do not wear
rings, chains, or other jewellery.
•Protective mask protects the airways from small particles, dust, pollen, bacteria, and
viruses.
•Protective gloves serve to protect the hands against rubbing, abrasions, cuts or more
injuries, as well as contact with hot surfaces.
•Protective footwear serves to protect against heavy falling parts and from slipping on
slippery surfaces.
Danger:
Danger to life due to electric shock. An electric shock can result in
death or serious injury. The unit must be fully isolated from the mains power
supply before all maintenance work and before opening the terminal
compartment!
•
Do not operate the unit without a proper electrical grounding/earthing.
•
Make sure the unit is connected to a power supply with a 30 mA
individual RCD.
•
Always disconnect the unit power supply before performing any
service or maintenance work.
Warning: Make sure to use protective gloves and a protective mask (min.
FFP2) BEFORE performing service and/or maintenance work to prevent the
inhalation of built up harmful particles inside the filter.
80001028 –Issue 1 10/21
11
6.2 Maintenance Schedule
The below maintenance schedule is recommended by Airflow Developments.
Maintenance Plan for all Purigo units
Recommended inspection
intervals
Component
Task
Action if
unacceptable
Regularly
3
months
6
months
1
year
Outer
Housing
Check for corrosion,
contamination,
damage or scratches
etc
Clean and
repair
X
Check for Damage
Fix the
damage
X
Air Filters
Check for
unacceptable levels of
dirt, odours and
damage
Replace the
filter
X
Check the filter
change indicator next
to adjustment knob.
Replace the
filter
X
Fan
Check for pollution,
shading and
corrosion/damage
Clean or
replace the
fan
X
Check for abrasion or
unbalance
Change the
fan
X
Check internal fan
connection cable
Repair or
replace
X
Silencer
Check for dirt and
damage
Clean or
change
X
6.3 Components
Each component should be checked for damage. Below is a list of all the components within
the unit. Common symptoms include loose wires, dents, scratches, or other damages.
Figure 2: Exploded component view
80001028 –Issue 1 10/21
12
6.4 Filters
The filters must be changed and replaced when the filter warning symbol appears on the
front panel of the unit. In addition, When maintaining the unit, check for dirt and dust and any
other debris, if it is excessive (significant dust or blackened by dirt) clean it out.
Table 5 contains a list of the filters and the respective part numbers for ordering. The filters
are available for purchase from airflow.com. The filters are only guaranteed if purchased
from Airflow developments. No responsibility will be accepted for use of 3rd party filters or
other filters. 3rd party filters may not perform as intended.
Device
Filter Classes
Filter QTY
Filter Dimensions
Ref No.
Purigo M650
Epm10 70%
1
305x305x100
90001513
HEPA 14
1
305x305x292
90001514
Purigo M850
Epm10 70%
1
305x305x100
90001515
HEPA 14
1
305x305x292
90001516
Replacement filters must be ordered from Airflow Developments.
To replace the filters follow the step by step guidance below:
1. Remove the back cover, unscrewing it with an allen wrench.
2. The filters should be clear and easy to remove.
Beware of the unit tipping forward or back when performing maintenance!
Warning: Make sure to use protective gloves and a protective mask (min.
FFP2) BEFORE performing service and/or maintenance work to prevent the
inhalation of built-up harmful particles inside the filter. Consult section 6.1.
Figure 3: Location of filters and back plate removal screws
80001028 –Issue 1 10/21
13
Airflow Developments Limited
Aidelle House, Lancaster House
Cressex Business Park, High Wycombe
Buckinghamshire, HP12 3QP, UK
©Copyright 2016. Airflow Developments Ltd
This manual suits for next models
3
Table of contents
