Airgle PurePal AG900 User manual

Filter Replacement
PurePal® Clean Room Air Cleaner (Model: AG900)
®

19
18
The art of purication
®
®
19
The art of purication
CARE AND MAINTENANCE OF
YOUR PUREPAL®Clean Room AIR
CLEANING SYSTEM
Your PurePal®
tasks.
Your PurePal®
Filter Removal
Remove Filters (AG900 Model) when done and make sure that the rear door is
completed closed.
carbon) is not monitored by the
Filter Check system. The Gas &
least every two months to see if
cleaning is necessary. Trapped
shortens the life of the cHEPA
your room
Cleaning the Gas & Odor Filter
1 pull upȟ
2 pull outȟ
Open Rear Door

19
18
The art of purication
®
®
19
The art of purication
CARE AND MAINTENANCE OF
YOUR PUREPAL®Clean Room AIR
CLEANING SYSTEM
Your PurePal®
tasks.
Your PurePal®
Filter Removal
Open Rear Door
Remove Filters (AG900 Model) when done and make sure that the rear door is
completed closed.
carbon) is not monitored by the
Filter Check system. The Gas &
least every two months to see if
cleaning is necessary. Trapped
shortens the life of the cHEPA
your room
Cleaning the Gas & Odor Filter
1、Pull up
2、Pull out

®
20
®
The art of purication
The art of purication
21
IR
IR
Life LCD is blinking, it means the
Follow the instructions above to
new ones. Press the“Reset”button
on the Control Panel to reset the
reset to 6 full bars.
Replacing the Titanium Pro® module
When “Light bulb” sign on the
control panel is blinking, it
means the Titanium Pro®module
needs replacement. Follow the
instructions above to remove the
used Titanium Pro®and install a
new one. Press the “Reset” button
on the Control Panel to reset. The
“light bulb” will stop blinking.
All other electronic components of the unit such as motor/fan are maintenance-free.
Cleaning the Housing and Sensor
Our unique Airgle®system design includes
for human hair and large particles. This
®module.
Use your vacuum to clean the grill on the
rear door.
The sensor and housing can be cleaned
using lukewarm water and a small amount
of detergent.

®
20
®
The art of purication
The art of purication
21
IR
IR
Life LCD is blinking, it means the
Follow the instructions above to
new ones. Press the“Reset”button
on the Control Panel to reset the
reset to 6 full bars.
Replacing the Titanium Pro® module
When “Light bulb” sign on the
control panel is blinking, it
means the Titanium Pro®module
needs replacement. Follow the
instructions above to remove the
used Titanium Pro®and install a
new one. Press the “Reset” button
on the Control Panel to reset. The
“light bulb” will stop blinking.
All other electronic components of the unit such as motor/fan are maintenance-free.
Cleaning the Housing and Sensor
Our unique Airgle®system design includes
for human hair and large particles. This
®module.
Use your vacuum to clean the grill on the
rear door.
The sensor and housing can be cleaned
using lukewarm water and a small amount
of detergent.