AirLive VOIP-111A User manual

AirLive VoIP-111A / 120A User’s Manual 0
VoIP-111A / 120A
SIP VoIP ATA Adapter
User’sManual

Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
SIP VOIP ATA Adapter
VOIP-111A , VOIP-120A
is in conformity wit
In accordance with 89/336 EEC-EMC Directive and 999/5 EC-R & TTE Directive
Clause Description
Limits and methods of measurement of radio disturbance
characteristics of information technology equipment
Disturbances in supply systems caused by household appliances
and similar electrical equipment "Harmonics"
Disturbances in supply systems caused by household appliances
and similar electrical equipment "Voltage fluctuations"
Information Technology equipment-Immunity characteristics-Limits
And methods of measurement
Safety for information technology equipment including electrical
business equipment
Manufacturer/Importer
Position/ Title : Vice President
OvisLink Corp.
5F., NO.6, Lane 130, Min-C uan Rd.,
Hsin-Tien City, Taipei County, Taiwan
■ EN 55022:1994/A1
:1995/A2:1997
■ EN 61000-3-2:2000
■ EN 61000-3-3:1995/
A1:2001
■ EN 55024:1998/A1
:2001/A2:2003
■ EN 60950-1:2001
■ CE marking
Signature：
Name ：
Albert Ye
Date： 2007/5/17
(Stamp)

VOIP-111/120A CE Declaration Statement
Country Declaration Country Declaration
cs
Česky [Czech]
OvisLink Corp. tímto prohlašuje, že tento OIP-
111/120A je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice
1999/5/ES.
lt
Lietuvių
[Lithuanian]
Šiuo OvisLink Corp. deklaruoja, kad šis OIP-
111/120A atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
da
Dansk [Danish]
Undertegnede OvisLink Corp. erklærer herved,
at følgende udstyr OIP-111/120A overholder de
væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
nl
Nederlands [Dutch
Hierbij verklaart OvisLink Corp. dat het toestel OIP-
111/120A in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn
1999/5/EG.
de
Deutsch
[German]
Hiermit erklärt OvisLink Corp., dass sich das
Gerät OIP-111/120A in Übereinstimmung mit
den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
mt
Malti [Maltese]
Hawnhekk, OvisLink Corp, jiddikjara li dan OIP-
111/120A jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
et
Eesti [Estonian]
Käesolevaga kinnitab OvisLink Corp. seadme
OIP-111/120A vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
hu
Magyar
[Hungarian]
Alulírott, OvisLink Corp nyilatkozom, hogy a OIP-
111/120A megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
en
English
Hereby, OvisLink Corp., declares that this OIP-
111/120A is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
pl
Polski [Polish]
Niniejszym OvisLink Corp oświadcza, że OIP-
111/120A jest zgodny z zasadniczymi wymogami
oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
es
Español
[Spanish]
Por medio de la presente OvisLink Corp. declara
que el OIP-111/120A cumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
pt
Português
[Portuguese]
OvisLink Corp declara que este OIP-111/120A está
conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
el
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ
ΟΤΙ OIP-111/120A ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/ΕΚ.
sl
Slovensko
[Slovenian]
OvisLink Corp izjavlja, da je ta OIP-111/120A v
skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
fr
Français [French]
Par la présente OvisLink Corp. déclare que
l'appareil OIP-111/120A est conforme aux
exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE
sk
Slovensky [Slovak]
OvisLink Corp týmto vyhlasuje, že OIP-111/120A
spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
it
Italiano [Italian]
Con la presente OvisLink Corp. dichiara che
questo OIP-111/120A è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
fi
Suomi [Finnish]
OvisLink Corp vakuuttaa täten että OIP-111/120A
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen
lv
Latviski [Latvian]
Ar šo OvisLink Corp. deklarē, ka OIP-111/120A
atbilst Direktīvas 1999/5/EK būtiskajām prasībām
un citiem ar to saistītajiem noteikumiem.
Íslenska [Icelandic]
Hér með lýsir OvisLink Corp yfir því að OIP-
111/120A er í samræmi við grunnkröfur og aðrar
kröfur, sem gerðar eru í tilskipun 1999/5/EC.
sv
Svenska
[Swedish]
Härmed intygar OvisLink Corp. att denna OIP-
111/120A står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv
1999/5/EG.
no
Norsk [Norwegian]
OvisLink Corp erklærer herved at utstyret OIP-
111/120A er i samsvar med de grunnleggende krav
og øvrige relevante krav i direktiv 1999/5/EF.
A copy of the full CE report can be obtained from the following address:
OvisLink Corp.
5F, No.6 Lane 1 0,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan, R.O.C.
This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, L , LT, LU, MT, NL, PL, PT, SK,
SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR

FCC Certifications
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV technician for help.
CAUTION
Any changes or modifications not expressly approved by the grantee of this device could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
All trademarks and brand names are the property of their respective proprietors.
Specifications are subject to change without prior notification.

Table of Contents
1. Introduction.................................................................................. 2
1.1 Hardware Overview...............................................................................................................2
1.2 Software Overview................................................................................................................2
2. Keypad Interface for The ATA..................................................... 3
3. Setup the ATA by Web Browser (LAN Connection) .................. 5
3.1 Login......................................................................................................................................5
3.2 System Information for the ATA.............................................................................................6
3.3 Phone Book...........................................................................................................................6
3.4 Phone Setting........................................................................................................................7
3.5 Hot line................................................................................................................................15
3.6 Alarm setting.......................................................................................................................15
3.7 Network...............................................................................................................................16
3.8 DMZ Setting........................................................................................................................21
3.9 Virtual Server Setting..........................................................................................................21
3.10 SIP Settings.........................................................................................................................22
3.11 NAT Trans. ..........................................................................................................................26
3.12 Others..................................................................................................................................27
3.13 MAC Clone setting..............................................................................................................31
3.14 Tone Settings: you can configure your tone settings in this page ...................................32
3.15 System Authority.................................................................................................................32
3.16 Save Change ......................................................................................................................33
3.17 Update ROM firmware: .......................................................................................................33
3.18 Reboot.................................................................................................................................35
4. Setup the ATA by using Console (Hyper Terminal)................. 36
4.1 Configure the COM port......................................................................................................36
4.2 ATA Login ............................................................................................................................37
4.3 Using CLI command to configure the ATA ..........................................................................37
5. How to make a phone call......................................................... 43
1 AirLive VoIP-111A / 120A User’s Manual

1. Introduction
This user’s manual is for VoIP-111A (1PSTN+1Phone) / VoIP-120A (2Phone) VoIP terminal adapter
(ATA). This user’s manual will explain the IVR instruction, web configuration, and command line
configuration for the ATA. Before using the ATA, some setup processes are required to make the ATA
work properly. Please refer to the Setup Menu for further information.
1.1 Hardware Overview
The ATA has the following interfaces for Networking, telephone interface, LED indication, and power
connector.
1.1.1 Two RJ-45 Networking interfaces—these two interfaces support 10/100Mps Fast Ethernet.
You can connect one RJ-45 Fast Ethernet port to the ADSL or Switch and connect the other
one to your computer.
1.1.2 One RJ-11 Type analog telephone jack interfaces. You can connect one analog telephone to
the terminal adapter.
1.1.3 LED Indication: There are three LED indicators in the ATA to show the Power, Register, and
Off-Hook indication.
1.2 Software Overview
Network Protocol Tone
•Ring Tone
•Ring Back Tone
•Dial Tone
•Busy Tone
•Programming Tone
•SIP v1 (RFC2543), v2 (RFC3261)
•IP/TCP/UDP/RTP/RTCP
•IP/ICMP/ARP/RARP/SNTP
•TFTP Client/DHCP Client/ PPPoE Client
•Telnet/HTTP Server
•DNS Client
•NAT/DHCP Server Phone Function
Codec •Volume Adjustment
•Speed dial key
•Phone book
•Flash
IP Assignment
•G.711: 64k bit/s (PCM)
•G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
•G.729A: 8k bit/s (CS-ACELP)
•G.729B: adds VAD & CNG to G.729
Voice Quality
•Static IP
•DHCP
•PPPoE
Security
•HTTP 1.1 basic/digest authentication for Web setup
•MD5 for SIP authentication (RFC2069/ RFC 2617)
•VAD: Voice activity detection
•CNG: Comfortable noise generator
•LEC: Line echo canceller
•Packet Loss Compensation
•Adaptive Jitter Buffer QoS
Call Function •ToS field
NAT Traversal
•STUN
•Call Hold
•Call Waiting
•Call Forward
•Caller ID
•3-way conference Configuration
DTMF Function •Web Browser
•Console/Telnet
•IVR/Keypad
•In-Band DTMF
•Out-of Band DTMF
•SIP Info
SIP Server Firmware Upgrade
•Registrar Server (three SIP account)
•Outbound Proxy •TFTP •Console
•HTTP
2
AirLive VoIP-111A / 120A User’s Manual

2. Keypad Interface for The ATA
You can use the PSTN phone keypad to operate the ATA. Please follow the instruction to configure your
terminal adapter.
Group IVR Action IVR Menu Choice Parameter(s) Notes:
Function Dial out from
PSTN Line 0＊None Press 0* can pass call to PSTN
Line, user can dial out from PSTN
Line. (For VoIP-111A only)
Function Unlock keypad
setting #190# None After you unlock keypad setting,
then you may configure the ATA.
Function Reboot #195# None After you hear “Option Successful,”
hang-up. The system will reboot
automatically.
Function Factory Reset #198# None
System will automatically reboot.
WARNING: ALL “User-Changeable”
NONDEFAULT SETTINGS WILL
BE LOST! This will include network
and service provider data.
Function Enable PPTP
client #116# None System will automatically reboot and PPTP client will be enabled
Function Disable PPTP
client #117# None System will automatically reboot
and PPTP client wll be disabled
Function Enable VLAN #118# None System will automatically reboot
and VLAN will be enabled.
Function Disable VLAN #119# None System will automatically reboot
and VLAN will be disabled
Function Enable Call
Waiting #138# None System will automatically reboot
and Call Waiting will be enabled.
Function Disable Call
Waiting #139# None System will automatically reboot
and Call Waiting will be disabled.
Function Enable
Anonymous #140# None System will automatically reboot
and Send Anonymous CID will be
enabled.
Function Disable
Anonymous #141# None System will automatically reboot
and Send Anonymous CID will be
disabled.
Function Blind Transfer #510# None Can only be performed in a phone
call conversation
Function Attendant
Transfer #511# None Can only be performed in a phone
call conversation
Function 3-way calling
(Conference) #512# None Can only be performed in a phone
call conversation
Info Check WAN IP
Address #126# None IVR will announce the current WAN
IP address of the ATA
Info Check LAN IP
Address #120# None IVR will announce the current LAN
IP address of the ATA
Info Check IP Type #121# None IVR will announce if DHCP in
enabled or disabled.
Info Check the Phone
Number #122# None IVR will announce current in use
VoIP number
Info Check Network
Mask #123# None IVR will announce the current
network mask of the ATA.
Info Check Gateway
IPAddress #124# None IVR will announce the current
gateway IP address of the ATA.
Info Check Primary
DNS Server
Setting #125# None IVR will announce the current
setting in the Primary DNS field.
Info Check Firmware
Version #128# None IVR will announce the version of the
firmware running on the ATA.
3 AirLive VoIP-111A / 120A User’s Manual

Setting Set DHCP client #111# None The system will change to DHCP
Client type
Setting Set Static IP
Address #112xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
DHCP will be disabled and system
will change to the Static IP type.
Setting Set Network
Mask #113xxx*xxx*xxx*xxx# Enter value-using numbers on the
telephone keypad. Use the * (star)
key when entering a decimal point. Must set Static IP first.
Setting Set Gateway IP
Address #114xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Primary DNS
Server #115xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Codec #130+[1-8]# 1:G.711 u-Law, 2: G.711 a-Law, 4:
G.729a, 5: G.726 16K, 6: G.726 24K,
7: G.726 32K, 8: G.726 40K,
You can set the codec you want to
the first priority.
Setting Set Handset
Gain #131+[00~15]# Handset Gain from 0~15 You can set the Handset gain to
proper value, default is 6
Setting Set Handset
Volume #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to
proper value, default is 10
Setting Set Auto
Configuration
Mode #137X# Select the auto configuration mode, in
the X field, you can press the
following; 0:OFF 1:TFTP 2:FTP
You can set the auto configuration
method you want, default is off
Setting Set Auto
Configuration
For TFTP Server #135xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set auto configuration method
to TFTP first
Setting Set Auto
Configuration
For FTP Server #136xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set auto configuration method
to FTP first
4
AirLive VoIP-111A / 120A User’s Manual

3. Setup the ATA by Web Browser (LAN
Connection)
The ATA provides a built-in web server. You can use a Web browser to configure the ATA. For more detail
instructions, please refer to the procedures below.
Step 1
Connect a straight-through cable from the ATA’s LAN port to a hub or switch while making sure that your
computer is also connected to the same hub or switch.
Step 2
Make sure you set your computer’s network setting to DHCP mode (obtain IP address automatically). This is
done in the Network Connections option that can be accessed in Control Panel.
Step 3
Open your web browser and in the address field, input the following IP address “http://192.168.100.1”.
The diagram below will show you an example of the web page menu:
htt
p
://192.168.100.1
(
LAN Port’s default IP
)
Figure 0. Login Page
3.1 Login.
3.1.1 Please input the username and password into the blank field. The default setting is:
1. For Administrator, the username is: airlive; and the password is: airlive. If you use this
account to login, you can configure all the settings.
2. For normal user, the username is: user; and the password is: null. If you use this account to
login, you will not be able to configure any SIP settings due to authorization level.
3.1.2 Click the “Login” button to move into the ATA web based management information page.
5 AirLive VoIP-111A / 120A User’s Manual

3.1.3 If you change the setting in the Web Management interface, please remember to click the
“Submit” button in that page. After you finished the change of the setting, click the “Save”
function in the left sideand click the Save Button. When you have finished the setting,
please click the Reboot function in the left side, and click the Reboot button in that page.
After the system has restarted, all the settings can work properly.
3.2 System Information for the ATA.
3.2.1 When you login to the web page, you can see the ATA current system information like
firmware version, company, etc. in this page.
3.2.2 Also you can see the function lists on the left side. You can use the mouse to click the
function you want to set up.
Figure 1. System Information
3.3 Phone Book
3.3.1 In Phone Book page contains (from page 1~14).
3.3.2 Phone : show serial number.
3.3.3 Name : setting other side telephone number
3.3.4 URL : other side IP address
Example:
When you dial 1# the device should search phone book,if search match number 1 will
send out “070000002@192.168.15.210”, if not got match number will send out 1.
-1- If you need to add a phone number into the phone book, you need to input the position, the
name, and the phone number (by URL type). When you finished a new phone list, just click
the “Add Phone” button.
-2- If you want to delete a phone number, you can select the phone number you want to delete
then click “Delete Selected” button.
-3- If you want to delete all phone numbers, you can click “Delete All” button.
6
AirLive VoIP-111A / 120A User’s Manual

-4-
Figure 2. Speed Dial
3.4 Phone Setting
3.4.1 In Phone Setting there are Call Forward, SNTP Settings, Volume Settings, Block Setting,
Caller ID, Auto Dial Setting, Flash Time Setting, Call Waiting, and T.38(FAX) Setting functions.
3.4.2 Call Forward function: you can setup the phone number you want to forward in this page.
There are three type of Forward mode. You can choose All Forward, Busy Forward, and No
Answer Forward by click the icon.
-1- All Forward: All incoming calls will be forwarded to the number you have chosen. You can
input the name(description) and the phone number in URL field. If you select this function,
then all the incoming call will be directly forwarded to the speed dial number you choose.
-2- Busy Forward: If you are on the phone, the new incoming call will be forwarded to the
number you have chosen. You can input the name(description) and the phone number in
URL field.
-3- No Answer Forward: If you cannot answer the phone, the incoming call will be forwarded
to the number you have chosen. You can input the name(description) and the phone
number in URL field. Also you have to set the Time-Out time for system to start to forward
the call to the number you have chosen.
-4- When you have finished the setting, please click the Submit button.
-5- If no further changes are needed, please click the Save Change Item on the left side; then
click the Save button. The changes you have made will be saved and the system will reboot
automatically.
7 AirLive VoIP-111A / 120A User’s Manual

Figure 3. Forward Setting
3.4.3 SNTP Setting function: you can setup the primary and second SNTP Server IP Address to get
the date/time information. Also you can base on your location to set the Time Zone, and
how long need to synchronize again. When you have finished the setting, please click the
Submit button.
Figure 4. SNTP Setting
8
AirLive VoIP-111A / 120A User’s Manual

3.4.4 Volume Setting function: you can setup the Handset Volume, Ringer Volume, and the
Handset Gain. When you have finished the setting, please click the Submit button.
-1- Handset Volume is to set the volume for you can hear from the handset.
-2- Ringer Volume is to set the ringer volume for you can hear.
-3- PSTN-Out Volume is to set the volume for you can hear from the PSTN side.
-4- Handset Gain is to set the volume sent to the other side’s handset.
-5- PSTN-In Gain is to set the volume sent to the other side.
-6- When you have finished the setting, please click the Submit button.
-7- If no further changes are needed, please click the Save Change Item on the left side; then
click the Save button. The changes you have made will be saved and the system will reboot
automatically.
Figure 5. Volume Setting
3.4.5 DND Setting function: you can setup the DND Setting to keep the phone slient. You can
choose Always Block or Block a period.
-1- Always DND: All incoming call will be blocked until this feature is disabled.
-2- DND Period: Set the amount of time that the phone will be blocked. If the “From” time is
larger than the “To” time, the Block time will from Day 1 to Day 2.
-3- When you have finished the setting, please click the Submit button.
-4- If no further changes are needed, please click the Save Change Item on the left side; then
click the Save button. The changes you have made will be saved and the system will reboot
automatically.
9 AirLive VoIP-111A / 120A User’s Manual

Figure 6. DND Setting
3.4.6 Caller ID function: displays Caller ID in your PSTN Phone or IP Phone.
-1- There are four selection of Caller ID. You need to base on your environment to set the
Caller ID function for FSK or DTMF. When you change the setting, please also double
check the FXS Port settings in Others. You need to choose the correct country code for the
Caller ID function to be in effect.
-2- When you have finished the setting, please click the Submit button. If no further changes
are needed, please click the Save Change Item on the left side; then click the Save button.
The changes you have made will be saved into the system and the system will reboot
automatically.
Figure 7. Caller ID Setting
10
AirLive VoIP-111A / 120A User’s Manual

3.4.7 Auto Dial Setting function: This function is when you input the phone number by the
keypad but you don’t need to press “#”. After time out the system will dial directly. When
you have finished the setting, please click the Submit button. If no further changes are
needed, please click the Save Change Item on the left side; then click the Save button. The
changes you have made will be saved and the system will reboot automatically.
Figure 8. Auto Dial Setting
Drop Prefix - No (add number): when the rule match will direct add number。
- Yes (reduce number): when the rule match will cut match number
then add you setting number。
Replace rule1 Setting dial number rule。
+: or。
xxx: number limit。
Dial Now (*) When there is a number that matches this field, the device will
automatically dial the number specified. However, first digit cannot
be set to 0, because the feature Dial Now is unable to detect first digit
as 0. Therefore if Dial Now is set to 0xxxx, the system will not be
able to send out this piece of information
Auto Dial Time Wait setting time then auto dial number
Submit [Button] Save setting value。
Reset [Button] Clean all setting。
11 AirLive VoIP-111A / 120A User’s Manual

For example:
Figure 9.Virtual Server Setting
1：Drop prefix: No, Replace rule 1: 002, 8613+8662。
Comment 1：when you dial number match 8613，device will auto add 002；dial out number
is [002+8613+xxx]。
Comment 2：when you dial number match 8662，device will auto add 002；dial out number
is [002+8662+xxx]。
2：Drop prefix: Yes, Replace rule 2: 006, 002+003+004+005+007+009；
comment 1：when you dial number has 002，device should drop all the 002，then change to
006；dial out number is [006+xxx]。
Comment 2：when you dial number has 003，device should drop all the 003，then change to
006；dial out number is[006+xxx]。
3：Drop prefix: No, Replace rule 3: 009, 12。
Comment 1：when you input 12，device should match 12 number auto add 009；dial out
number is [009+12+xxx]。
4：Drop prefix: No, Replace rule 4: 007, 5xxx+35xx+21xx。
Comment 1：if you input number is 5xxx，when device search match 5 and after 3 number
should auto add 007；device dial out number is [007+5xxx]。
Comment 2：if you dial out number is 534，when device search match 5 and after add 2
number date ；this rule is not match above dial number rule;dial out number is
[534]。
Comment 3：if you input number has 35xx，device search match 35 and after add 2 data
should auto add 007；dial out number is[007+35xx]。
12
AirLive VoIP-111A / 120A User’s Manual

Comment 4：if you dial out number not match setting rule ,device should dial out you dial
number 。
5：Dial now: *xx+#xx+11x+xxxxxxxx
Explanation 1: If the number dialed matches the rule “*xx”, it will automatically dial the
dialed number, e.g. *00, *01, *02… *99. If the user happens to dial more
digits in the end such as *001111, the system will detect that the first two
matches the rule, and send out the number *00 regardless of the remaining
digits. Hence the name Dial Now.
Explanation 2: If the number dialed matches the rule”#xx”, it will automatically dial the
dialed number, e.g. #00, #01, #02… #99. If the user happens to dial
more digits in the end such as #001111, the system will detect that the first
two matches the rule, and send out the number #00 regardless of the
remaining digits. Hence the name Dial Now.
Explanation 3: If the number dialed matches the rule “11x”, then it will automatically dial the
dialed number, e.g. 110, 111, 112…119. If the user happens to dial more
digits in the end such as 1101234 the system will detect that the first three
matches the rule, and send out the number 110 regardless of the remaining
digits. Hence the name Dial Now.
Explanation 4: If it detects the number dialed is 8 digits, then it will automatically send out
the number dialed, e.g. 12345678.
3.4.8 Flash Time Setting function: When you use the PSTN Phone and you need to press the
Hook to do the Flash (Switch to the other phone line or HOLD), this function is for you to set
the time you press the Hook to represent the Flash function. When you have finished the
setting, please click the Submit button. If no further changes are needed, please click the
Save Change Item on the left side; then click the Save button. The changes you have made
will be saved and the system will reboot automatically.
Figure 10. Flash Time Setting
13 AirLive VoIP-111A / 120A User’s Manual

3.4.9 Call Waiting Setting function: You can Enable/Disable the Call Waiting function. When
there is a new incoming call while you are talking with someone, you will hear the call waiting
tone. When you have finished the setting, please click the Submit button. If no further
changes are needed, please click the Save Change Item on the left side; then click the Save
button. The changes you have made will be saved and the system will reboot automatically.
Figure 11. Call Waiting Setting
3.4.10 T.38 Setting function: You can Enable/Disable the T.38 function. When you have finished
the setting, please click the Submit button. If no further changes are needed, please click
the Save Change Item on the left side; then click the Save button. The changes you have
made will be saved and the system will reboot automatically.
Figure 12. T.38 (FAX) Setting
14
AirLive VoIP-111A / 120A User’s Manual

3.5 Hot line
This function supports auto dial for you to set a hot line number. When you set this function the device
should not dial any number.
3.6 Alarm setting
Alarm time: setting telephone ring time, when you setting time with current time are match device should
produce a ring; this time format is 24 hours.
15 AirLive VoIP-111A / 120A User’s Manual

3.7 Network
3.7.1 In Network you can check the Network status, WAN setting,LAN setting,DDNS settings and
VLAN Settings.
3.7.2 Network Status: You can check the current Network setting in this page.
Figure 13. Network Status
16
AirLive VoIP-111A / 120A User’s Manual