AirLive SmartCube 300W User manual

SmartCube 300W
Intelligent 3MP Wireless Cube IPCAM
with Temperature and Humidity Sensor
Quick Installation Guide
Support
You can download the
complete guides and
supporting programs from
<http://www.airlive.com/pro
duct/smartcube-300w/downl
oad>, or scan the QR code
here.
Please consult with the FAQs
<http://www.airlive.com/pro
duct/smartcube-300w/faq>
before writing to OvisLink
Tech Support Team for further
assistance
For any other question, please read the user
manual in the CD or mail to [email protected]
for technical support.

SmartCube 300W Package Contents
Please check the package contents and contact
your distributor if any part is missing.
1
2
3
SmartCube 300W
5V AC Power Adapter
4 Quick Installation Guide
5 User Manual CD
6Label
Mounting Accessories
(Screws / Plastic Anchors)
I/O Interface
802.11n Wi-Fi
Micro SD Slot

I/O Interface
Power Input
Ethernet Port
WPS and Reset Button
DC
Remove Cover box
01 Remove Cover box

Remove Cover box01 Assemble the bracket and the stand 02
Assemble the bracket and the stand

Assemble the bracket and the stand02 Assemble the bracket and the stand
02

Assemble the bracket and the stand
02 Assemble the bracket and the stand
02

Assemble the bracket and the stand
02
Plug the power cable into the camera.
Plug the adapter
03

When SmartCube 300W is powered on, the
green led will be on first. After SmartCube
300W is ready, the red len will be on and the
green led will be off.
Power on SmartCube 300W
04
Please use three screws to fix the camera.
Mount the camera05

Adjust the View of the Camera
06
There are two ways to connect to WiFi
1. WPS connection.(WPS function only
supports that the router is in WPA2 AES
security protocols or no protected password.)
2. Connect wire to setup wireless connection.
WiFi Connection
07

Click WPS button on the router first.
WPS Wireless connection
08
Ant. Ant.Reset/WPSLAN4 LAN3 LAN2 LAN1
12V DC
WAN
Internet
on
Click Reset/WPS button on SmartCube 300W
then the green led will be on for 2 minutes.
When SmartCube 300W connects to the router
sucessfully, the green led will be flashing.
WPS Wireless connection08