AirLive Ether-8GF User manual

Quick Setup Guide
Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
Unmanaged Multi Gigabit Fiber Switch
Ether-8GF
is in conformity with
In accordance with 2014/30/EU and 2014/35/EU Directive
Clause
Manufacturer/Importer
Description
AirLive Technology Corporation
4F, No.132, Lane 235, Baoqian Rd., Xindian Dist.,
New Taipei City 23145, Taiwan
■
■CE marking
Name : A van Rossem Position/ Title : Product Manager
EN 55032:2015 Electromagnetic compatibility (EMC)
■EN 62368-1 Electromagnetic compatibility (LVD)
Date : December 2021Place : Republic of China (Taiwan)
/ po
ter
AirLive Technology Corporation declares that thisdevice
is in compliance with the essential requirements and
other relevantprovisionsofdirective 2014/30/EU.
Regulatory Approvals
CE Marking Warning
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
CE Statement
This product complies with the 2014/30/EU and 2014/35/EU directives, including
the following safety and EMC standards:
EN 55032:2015/A11:2020
■
Electromagnetic compatibility (EMC)
EN IEC 61000-3-2:2019
■
Electromagnetic compatibility (EMC)
Ether-8GF
EN 61000-3-3:2013/A1:2019
■
Electromagnetic compatibility (EMC)
EN 55024:2010+A1:2015
■
Electromagnetic compatibility (EMC)
EN 62368-1:2014+A11:2017
■
Electromagnetic compatibility (LVD) - Safety
SNMP-GSF12M
10-Port Unmanaged Multi Gigabit Fiber Switch
Including 8 SFP ports, 2 RJ-45 ports

Installation Steps
Quick Setup Guide
Ether-8GF
10-Port Unmanaged Multi Gigabit Fiber Switch
Including 8 SFP ports, 2 RJ-45 ports
Installation Step:
English
EN
1. Remove the switch and accessories from the package.
2. Connect power adapter to the switch. Make sure that Power (PWR) LED is on.
3. Connect your SFP LX/SX module to one of the 8 SFP port of the switch
Use the Fiber switch as main connection point of other fiber device (see A).
4. Check the Port LED indicator status. When a device is
connected SFP/RJ-45 it light on.
5. For more product information visit www.airlive.com.
Example (A) Connection
LED DEFINITIONS
PWR
Link/Act 1~8 SFP
Link/Act RJ-45
Green ON
Green OFF
Green ON
Green ON
Green OFF
Orange ON
Power is on and normal.
The switch is not receiving power.
The port Status LEDs ON Link Connection, LEDs Blinking Data transmission.
No Connection.
1Gbps.
Speed
The port Status LEDs ON Link Connection, LEDs Blinking Data transmission.