AirLive IG-642POE User manual

IG-642POE
6 Port Gigabit Industrial PoE Switch with 2 SFP Port
Quick Setup Guide
Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
6 Port Gigabit Industrial PoE Switch with 2 SFP Port
AirLive IG-642POE
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause
Manufacturer/Importer
Description
OvisLink Corp.
5F, No.6, Lane 130, Min-Chuan Rd., Hsin-Tien Dist.,
New Taipei City 231, Taiwan
■
■CE marking
Signature
：
Name : Albert Yeh
Position/ Title : Vice President
t
Y
eh
EN 50155:2007/AC:2012 Railway applications - Electronic equipment used on rolling stock
■EN 55011:2009/A1:2010 Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement
■EN 55022:2010/AC:2011 Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurement
■EN 55024: 2010 Information technology equipment - Immunity characteristics - Limits and
methods of measurement
■EN 61000-6-2:2005
/AC:2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments
■EN 61000-6-4:2007
/A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
■EN 60950-1:2006
/A11:2009/A1:2010
/A12:2011
Information technology equipment - Safety - Part 1: General requirements
Date : 2015/10/16
Place : Republic of China (Taiwan)

Regulatory Approvals
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
HR
OvisLink Corp. izjavljuje da je ovaj uređaj u
skladu sa neophodnimpreporukama i ostalim
važnim odredbama Directive 1999/5/EC.
RO
OvisLink Corporation declara ca acest
dispozitiv este în conformitate cu cerintele
esentiale si alte prevederi relevante ale
Directivei 1999/5/EC
ID
OvisLink Corporation menyatakan bahwa
perangkat ini telah sesuai dengan persyaratan
utama dan ketentuan terkait lainnya direktif
1999/5/EC.
Directive 1999 / 5 / EC
FCC Statement
This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HR, HU, ID, IE, IT,
LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR
Connect POE industrial switch into 46~ 56Vdc Power source (12V ~56Vdc for IG-602)
Insert positive/negative DC power wires into V+/V- for power 1 or Power 2
Tighten the wire-camp screw to prevent wire loosening
Mounting Installation
1. DIN-Rail: screw the DIN-Rail Bucket into the industrial switch
2. Wall-Mount mounting: Remove the DIN-Rail kit in the switch and screw the wall
mount kit into switch.
English
EN
OvisLink Corporation declares that this device is in compliance with the
essential requirements and other relevant provisions of directive 1999/5/EC.
Scan the QR Code Here
http://www.airlive.com/product/ig-642poe/download
Installation Guide
For more information, you can download the complete guides and supporting
programs from <http://www.airlive.com/product/ig-642poe/download> , or scan
QR code here