AirLive BT-120ADS User manual

Bluetooth Combo Don
g
le
BT-120ADS
QuickSetupGuide
English ●●●
Русский ●●●
Português ●●●
Deutsch ●●●
日本語 ●●●
한국어 ●●●
33
17
25
1
9
41

1
1
English
Bluetooth Combo Dongle
B
T
-
120AD
S
Important Notices
If you use the BT-120ADS only for A2DP (Stereo) Bluetooth, you don’t
need this software because the BT-120ADS is automatically to become
the default sound device without any software required.
This Bluesoleil software is intended to support Bluetooth functions beyond
just A2DP (Stereo) application. Please refer to IVT’s website for detailed
User’s Guide and any support issues at
http://www.ivtcorporation.com .
Package contents
English

2
2
English
Bluetooth Combo Dongle
B
T
-
120AD
S
Run Bluesoleil for Skype
Install Bluesoleil software on Windows XP or 2000
NOTE: please uninstall other Bluetooth software before install Bluesoleil,
especially from WidComm.
1. DONOT plug your BT-120ADS into your PC/NB before install the
software.
2. Place Bluesoleil CD, or download the software from website and
execute it (It is recommended to uninstall, without BT-120ADS
plugged in, older version before install newer one. There is no
upgrade on installation.)
3. Follow the installation instructions to complete the installation.
(PC/NB will re-start to activate the Bluesoleil.)
RECOMMENDED: Remove the Bluesoleil from Startup list so that it will not
be automatically started when system boots up. Just run or execute the
Bluesoleil when you need it.
1. Execute the Bluesoleil software on Windows XP or 2000
2. Follow the instruction to plug into BT-120ADS.
English

3
3
English
Bluetooth Combo Dongle
B
T
-
120AD
S
A
3. Power on your AirLive Bluetooth Stereo headset or Reciver.
4. Click on (A) the bright center of the pictorial Sun to search
Bluetooth devices
5. You should find a stereo headset on the surrounding trail matches
your headset (with MAC or BD address or just a name of “Stereo
headset”) and you may see other Bluetooth devices nearby as
well.
Note: The MAC address of BT-120ADS may be found inside the left
cushion of ear cup. Other models may be found inside battery cover, or
back of the devices.
6. You may click the (A) to stop searching or let it run out of
searching time.
7. Click on the stereo headset to activate a connection and available
services.
English

4
4
English
Bluetooth Combo Dongle
B
T
-
120AD
S
8. You will see the icons of available services are highlighted and
framed.
9. For BT-120HP, you will see Bluetooth AV Service speaker for
stereo music and Bluetooth Headset Service headset for Skype
or Mono Audio-MIC headset application
10. Click Bluetooth Headset Service. The LED will be blinking and
you will hear ring tones on the headset to indicate a connection
established.
11. On the headset, click on the phone pick up bottom (same as power
bottom on BT-120HP.)
12. Go ahead to use Skype as usual. You may listen and talk on the
Bluetooth headset.
NOTE: When using Skype, if you do not hear any voice you may need to
check on “Control Panel”Æ”Sounds and Audio Devices”Æ”Audio” to check
if Windows has switched your Sound device to Bluetooth. If not, you need
to switch to BT-120ADS – “Bluetooth AV/HS”.
English

5
5
English
Bluetooth Combo Dongle
B
T
-
120AD
S
Run Bluesoleil for A2DP Stereo Bluetooth
1. Follow the step 1-9 in above section Run Bluesoleil for Skype
2. Click Bluetooth AV Service. The LED will be blinking to indicate
a connection established. On BT-120HP, you will hear a short
music played for connection.
3. Go ahead and play your favorite music on PC/NB
Switching Between AV and Headset Mode
The BT-120ADS can function in 2 different Audio Mode:
AV Mode: When the BT-120ADS is in AV mode, you will be able to
hear Hi-Fi Stereo sound. However, the Microphone will not function in
this mode. It is recommended that you use this mode when listening to
music. On the IVT utility, the AV Mode is represented by the Speaker
icon.
Headset Mode: When the BT-120ADS is in Headset Mode, you
will be able to listen and record at the same time. However, the sound
quality is reduced. It is recommended that you use this mode for
applications that require microphone input, such as Skype. On the IVT
utility, the Hi-Quality Mode is represented by the Headset icon.
Please follow the procedure below to switch between 2 modes:
1. Close all music listening programs such as Windows Media Player.
2. Run IVT BlueSoleil program. You can double click on the tray icon
or you can run it from Start -> All Programs -> IVT BlueSoleil->
BlueDoleil.
English

6
6
English
Bluetooth Combo Dongle
B
T
-
120AD
S
3. You will see the following screen.
4. Please note that you can not just click on the AV or Headset
Icons to change modes. Otherwise, you will get the following
error message.
5. Please Right click on the device icon and click on menu item
Disconnect. Select the menu item Bluetooth AV Service (or
Bluetooth Headset Service)
English

7
7
English
Bluetooth Combo Dongle
B
T
-
120AD
S
6. A pop-up message asks you to confirm the disconnection. Click on
Yes to continue.
7. Now you can click on the AV or Headset icon to connect. Or, you
can right click on the device and click on menu item connect.
Select either Bluetooth AV Service or Bluetooth Headset
Service.
English

8
8
English
Bluetooth Combo Dongle
B
T
-
120AD
S
Specification
Standards Bluetooth specification V1.2 compliant
Native Bluetooth A2DP profile
Native Bluetooth AVRCP profile
Support following profile in HCI mode with
software install
- GAP, DUN, OPP, HCRP, HID, PAN, BIP, A2DP,
AVRCP, SYNC, HSP, FAX, LAP, FTP
Frequency Band 2402 ~ 2480 MHz
Tx Power 0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity < -80dBm (PER 1%)
Distance > 10m (open space)
Audio Streaming
Format
SBC 48.000kHz
Audio Frequency
Range
20Hz ~ 22kHz
Physical
Specification:
Dimension: 69.53 x 26.68 x 9.19 mm
(LxWxH)
Weight: 10g
Environmental
Range:
Operating temperature:-10 ~ +50℃
Humidity: Relative humidity 0 ~ 95%
Certifications: FCC, CE, BQB, TELEC
English