AIRPULSE A200 User manual

A200
User manual Mode d'emploi
Active Speaker System
Dongguan Planum Audio Systems Co., LTD
No. 2 East Industry Road, Songshan Lake Naonal High-tech
Industrial Development Zone, Dongguan 523808 China
www.airpulseaudio.com
Printed in China

12
1. Read these instrucons. 2. Keep these instrucons.
3. Heed all warnings. 4. Follow all instrucons.
5. Clean only with dry cloth.
6. Do not use this speaker near water and never put this speaker into liquids or allow liquids to drip or spill onto it.
7. Do not place appliance filled with water on this speaker, such as vase; nor place any form of open fire such as lit candle.
8. Do not block any venlaon openings. Please leave enough space around the speakers to keep good venlaon (the distance
should be above 5cm). Install in accordance with the manufacturer’s instrucons.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
11. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles, and the point
where they exit from the speaker.
12. Only use aachments/accessories specified by the manufacturer.
13. Unplug this speaker during lightning storms or when unused for long periods of me.
14. Refer all servicing to qualified service personnel. Servicing is required when the speaker has been damage in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the speaker, the
speaker has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
16. Do not use strong acid, strong alkali and other chemical solvents to clean the product surface. Please use neutral solvent
or water to clean the product.
17. A warning that an apparatus with CLASS I construcon shall be connected to a MAINS socket outlet with a protecve
earthing connecon.
18. For apparatus containing a USER-replaceable COIN/BUTTON CELL BATTERY, the following text or equivalent.
WARNING: To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Thank you for purchasing AIRPULSE A200 Acve Speakers. Please read this manual carefully before operang this system.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collecon systems or contact the retailer where the product was purchased. They can take
this product for environmental safe recycling.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use cauon when moving the cart/apparatus combinaon to avoid injury from p-over.
Important Safety Instrucon
To prevent the risk of electric shock, do not
remove cover (or back). No user-serviceable
Parts inside. Refer servicing to qualified
Service personnel only.
The lightning flash with arrowhead inside
the triangle, is intended to alert the user
to the presence of un-insulated dangerous
voltage within the product's enclosure
that may be of a sufficient magnitude to
constute a risk of electric shock to persons.
The exclamaon point inside the triangle
is intended to alert the user to the presence
of important operang and maintenance
(servicing) instrucons in the literature
accompanying the product.
FCC Statement
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operaon.
Any Changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
IC Cauon
The device meets the exempon from the roune evaluaon limits in secon 2.5 of RSS 102 and compliance with RSS-102 RF
exposure, users can obtain Canadian informaon on RF exposure and compliance.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to the following two condions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operaon of the device.
This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Le disposif rencontre l'exempon des limites courantes d'évaluaon dans la secon 2.5 de RSS102 et la conformité à l'exposion
de RSS-102 rf,ulisateurs peut obtenir l'informaon canadienne sur l'exposion et la conformité de rf. Le present appareil
est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitaon estautorisée aux deux
condions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareildoit accepter tout brouillageradioélectrique subi, mêmesi le brouillage est suscepble d'en compromere
le fonconnement.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et votre corps.
Statement
English English

RCA to 3.5mm jack plug
Power cable
Inside the Box
Box Contents:
RCA to RCA audio cable（1.5M / 5）
Speaker connecng cable (5M / 16)
Fiber opc input cable (1.5M / 5)
Remote control
User manual
Passive speaker Acve speaker
Speaker Controls
1. Master volume control/ input selecon
Press in to navigate between audio sources:
BAL->AUX->Opcal->Coaxial->Bluetooth.
Note: Press and hold the Master volume
control to disconnect from Bluetooth devices
2. Bass
3. Treble
4. Balanced input port
5. AC input
6. Auxiliary input socket
7. Opcal input socket
8. Coaxial input socket
9. Le speaker output
10. On/Off Switch
11. Speaker input
12. LED indicator
Red: Opcal/Coaxial mode
Green: BAL/AUX mode
Blue: Bluetooth mode
3 4
12
②
①③
④
⑤
6
7
8
9
10
11
English English

5 6
②
③
④
①
⑥
⑤
⑦
ＢＡＬ
Connecons
1. IR Window
2. Power On
3. Master Volume Control
4. Mute
5. Opcal/Coaxial mode
6. BAL/AUX mode
7. Bluetooth mode
How to change baery:
Insert a coin into the slot and rotate an-clockwise to open the baery
compartment, install the new CR 2025 baery (electrode + upturned)
and rotate the cover clockwise to close the compartment.
WARNING!
1. Do not expose the remote control to extreme heat or humidity.
2. Do not charge the baeries.
3. Remove the baeries when not in use for an extended period of
me.
4. Do not expose the baery to excessive heat such as direct sun,
fire, etc.
open close
Remote Control
English English
5. Do not ingest baery, chemical burn hazard (The remote control supplied with)This product
contains a coin/buon cell baery. If the coin/buon cell baery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to death.
6. Keep new and used baeries away from children, if the baery compartment does not close
securely, stop using the product and keep it away from children.
7. If you think baeries might have been swallowed or placed inside any part of body, seek
immediate medical aenon.

Balance and AUX Input
78
or
or
1. Press the master volume control on the acve speaker or press the “OPT/COAX” buon on the
remote control to select the opcal/coaxial input.
2. Using opcal or coaxial cable (opcal cable included) to connect audio sources to your speaker.
3. Play from your devices and adjust the volume accordingly.
Note:
In opcal and coaxial modes, only PCM signal with 44.1KHz/48KHz/96KHz/192KHz can be decoded.
Opcal and Coaxial Input
1. Press master volume control on acve speaker or press the “BAL/AUX” key on the remote control
to select AUX audio source, LED indicator turns to green.
2. Connect BAL/AUX input port on acve speaker to your audio source (cellphone, mp3, mp4 player
etc) using the included RCA-RCA audio cable.
3. Touch play on your device and adjust the volume to a desired level.
or
BAL
or
English English

910
or
Power Output: L/R Ribbon Tweeter: 10W+10W
L/R Mid-Range: 55W + 55W
Signal-Noise Rao dB(A): ≥90dB(A)
Input Interface: AUX, Balance Input, Opcal, Coaxial, Bluetooth
Input Sensivity: Balance Input: 1000±50mV
Aux Input: 550±50mV
Bluetooth Input: 1000±50mFFs
Opcal Input: 350±50mFFs
Coaxial Input: 350±50mFFs
Noise Level: ≤25dB(A)
Frequency Response: 46Hz~20KHz
Tweeter: Phase Correcon Horn Loaded Ribbon Tweeter
Mid-Woofer: 5.5" Aluminum Cone Neo Power Mid-Woofer
Cabinet Size (WxHxD): 203 x 355 x 295 (mm)
Net Weight: 19 Kg (42 Pounds ) / Set
Specificaons
Pairing
Bluetooth Input
1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth buon on the
remote control or press the master volume control on back panel of the acve speaker.
2. Go to setup secon on your source devices (mobile phones, tablets, etc.) and search for
nearby Bluetooth devices, you will find “AIRPULSE A200”in the list.
3. Pair your device with “AIRPULSE A200”.
4. Play audio tracks on your device and adjust the volume to a desired level.
Other operaons
5. Aer pairing, using the pair record on your source device to re-connect to the speaker;
6. Bluetooth of the product will be powered off aer switching away from Bluetooth mode,
so in other audio mode Bluetooth connecon can not be made.
7. When switch to Bluetooth mode, the speaker will try to connect the last connected
Bluetooth source device.
8. To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.
Note:
1. Bluetooth connecvity and compability may be different among different source
devices, depending on the soware versions of source devices.
2. To enjoy the full Bluetooth funcons of this product, please ensure your mobile device
supports A2DP and AVRCP profile.
3. PIN code for connecon is “0000” if needed.
AIRPULSE A200
English English

11
Troubleshoong
Problem Soluon
• Check if the power indicator light is ON
• Try to turn up the volume using either the master
volume control or remote control.
• Ensure the audio cables are firmly connected and
the input is set correctly on the speakers.
• Check if there is signal output from the audio source.
• Make sure the speaker is switched to Bluetooth input,
in other audio input mode Bluetooth can not be paired
or connected.
Disconnect from any Bluetooth device by press and hold
the volume dial in Bluetooth mode, then try again.
• Effecve Bluetooth transmission range is 10 meters,
please make sure operaon is within the range.
• Try another Bluetooth device for connecon.
• Check if mains power is connected. or if the wall outlet
is switched on.
No sound
Cannot connect via Bluetooth
The A200 does not turn on
If you want to find out more about AIRPULSE, please visit our website at www.airpulseaudio.com
English