AIRPULSE P100X User manual

Acve Speaker system
P100X
User manual
Printed in China
Dongguan Platinum Audio Systems Co., LTD.
No. 2 East Industry Road, Songshan Lake Naonal High-tech
Industrial Development Zone, Dongguan 523808 China
www.airpulseaudio.com
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / IN PUT

1 2
Please read the following contents carefully before turning on your equipment; and follow the
instrucons below.
Keep this informaon around for future reference.
1. Please read the instrucons carefully. Keep it in safe place for future reference
2. Heed all warnings.
3. Follow all instrucons.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
6. Protect the power cord from being walked on or pinched parcularly at plugs, convenience
receptacles, and the point where they exit from the speaker.
7. Only use aachments/accessories specified by the manufacturer.
8. Unplug this speaker during lightning storms or when unused for long periods of me.
9. Before connecng speakers to power source, please turn off the power switch and make sure
the volume is set at minimum level.
10. Please do not place power cable and signal cable near heat source (such as electric heater
and radiator).
Do not leave cables where they can easily be stepped on or compressed.
11. Use electric outlets that allow power cable be pulled out easily. When speakers are not being
used for an extended period of me, please turn off power switch and disconnect power plug.
12. In order to avoid damage from thunder and lightning, turn off power switch and disconnect
speaker from power source during a rain storm.
13. Please do not drag power cable when disconnecng from wall socket. Hold power cord firmly
at the top to unplug from the wall socket.
14. Use the speakers only within voltage specificaons. Using the speakers with voltage higher than
specificaons is dangerous and can cause equipment damage, fire damage or bodily injury.
15. These speakers do not include any self serviceable parts. Do not aempt to open the speaker
to uninstall any parts or do any type of modificaons. If problems occur during use please
contact professional technicians only for repair.
16. Please refer to the trouble shoong secon in owner’s manual for common operaon errors
and to determine possible malfuncon.
17. Please do not place speakers in places where they can be easily hit by falling objects or dropping
and splashing liquid. Do not place any lit fire (such as candle) on top of speaker as this may
lead to fire hazard.
Do not place any liquid containers on top of speaker as this may fall on speakers and causing
electric shock and damage to speaker.
18. Place speakers in a stable posion so they will not easily fall off causing damage and injury.
19. Place speakers in a well venlated and dry posion, far from direct sunlight, heat source,
vibraon, dust, moist or extremely cold condion. For opmal performance, please leave at
least 20 cm distance space around the speaker.
20. Please do not use speaker at maximum volume for an extended period of me, This may cause
damage to your hearing.
21. Before moving the speakers, please first turn off power switch and disconnect from power
source.
22. When the following symptoms occur, please turn off power switch and disconnect from
power source:
‒ Power cable or plug is worn or damaged.
‒ Abnormal odor or smoke is detected.
‒ Small objects falling inside the speaker.
‒ Sudden break off while playing music.
Consult a professional repair technician to diagnose and repair the speaker.
23. Do not use chemical solvent to clean the surface of speaker. To avoid surface damage, use
a clean and so cloth only.
24. Do not use the speakers in proximity closer than 22 cm to individuals wearing cardiac pacemaker
or defibrillator.
Warning:
1. Use the same type of baery only to replace baery in remote control.
2. Never disassemble, smash, or compress baery inside remote control; or toss it into a fire.
3. Please stop using the remote control if it has the appearance of bulging, leaking, discoloring
or any other abnormal symptoms. Improper use of baery can cause explosion or leaking
which leads to burn or other bodily injury. Please dispose baery by referring to local legislaon.
Excessively loud music may lead to hearing loss. Please keep the volume in a safe range.
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device,
please use the return and collecon systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the speakers. When a cart is used, use cauon when moving the cart/speakers combinaon to
avoid injury from p-over.
Power warning:
1. Place the product near the power outlet for easy use.
2. Before use, make sure that the operang voltage is the same as your local power supply. Correct
operang voltage can be found on the product plate.
3. For safety purpose, unplug the product during lightning storms or when unused for extended
periods of me.
4. Under normal condions, the power supply may get hot. Please keep good venlaon in the area and
exercise cauon.
5. Safety warning labels on the housing or boom of the product or power adaptor.
This symbol is to alert the user to the presence of un-insulated dangerous voltage within
the product's enclosure that may be of sufficient magnitude to constute a risk of electric
shock to persons.
This symbol is to warn the user not to disassemble the enclosure of the product and
there is no user-replaceable part inside. Take the product to an authorized service center for
repair.
This symbol indicates that the product is for indoor use only.
For wireless product:
1. Wireless product may generate shortwave radio frequencies and interfere with the normal
use of other electronic devices or medical equipment.
2. Turn off the product when it’s disallowed. Do not use the product in medical facilies, on
airplane, at gas staons, near automac gates, automac fire alarm system or other automated
devices.
3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves
may affect the normal operaon of the pacemaker or other medical devices.
This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth
requirement.
The MAINS plug is used as the disconnect device, the disconnect device shall remain readily
operable.
Important safety instrucon Important safety instrucon

3 4
FCC Statement
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operaon.
Any Changes or modificaons not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio
communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Important safety instrucon
IC Cauon
The device meets the exempon from the roune evaluaon limits in secon 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian informaon on RF exposure
and compliance.
This device contains licence-exempt transmier(s)/receiver(s) that comply with Innovaon, Science
and Economic Development Canada’s licence-exempt RSS(s). Operaon is subject to the following
two condions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operaon of the device.
This equipment should be installed and operated with a minumum distance of 20 cm between
the radiator and your body.
Le disposif rencontre l'exempon des limites courantes d'évaluaon dans la secon 2.5 de RSS102
et la conformité à l'exposon de RSS-102 rf, ulisateurs peut obtenir l'informaon canadienne sur
l'exposion et la conformité de rf.
L’émeeur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovaon, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitaon est autorisée aux deux
condions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscepble
d’en compromere le fonconne.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et
votre corps.
Catalog
Box contents
Speaker illustraon
Remote control illustraon
Installing baery in remote control
Preparaons
Connect to power source
Speaker placement
Playback instrucon
Connect to playback devices
Playing
Specificaons/statement
Troubleshoong
5
6
7
8
9
9
9
10
10
11
12
13

56
Speaker illustraon
RL
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INPUT
User manual
Remote control
RCA audio cable
Power cable
Speaker
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INP UT
3.5mm-RCA audio cable
Note: Images are for illustrave purposes only and may differ from the actual product.
Box contents
1. Power switch: Turn on/off speaker power
Turn on: rotate the switch right and
release unl you hear prompt tone along
with the orange light around the switch
lighng up (please note the light will be
lit in 1 secondaer the prompt tone rings);
Turn off: rotate the switch le and release
unl you hear prompt tone along with the
orange light around the switch turning off.
(Note: Turning off the power switch will
only turn the amplifier off, and power source
is sll available. To thoroughly turn the
speaker off, please unplug the power cable
from the mains socket.)
2. BASS: Bass level adjustment
Increase or decrease low frequencies
within the range of +/-3dB, sasfy
different listening preferences or match
various surroundings.
3. TREBLE: Treble level adjustment
Increase or decrease high frequencies
within the range of +/-3dB, obtain
different mbre through adjustment.
4. VOLUME/INPUT: Volume control
/Input selecon
Rotate: adjust volume level;
Press: switch input mode .
Indicate the current input mode in terms
of the input mode indicator.
5. Input mode indicator
Indicate the current input mode (type),
Orange light steady lit: Line In input mode
Blue light steady lit: Bluetooth input mode
Note: For inial pairing, the blue light will
flash when Bluetooth input is selected,
aer pairing is successful, theblue light
will be steady lit.
6. LINE IN: Line In input port
Connect to playback devices using RCA
audio cable.
7. AC input port
Connect to plug of power cable.

* When playing music in Bluetooth mode and switching to other modes, Bluetooth
connecon will automacally return if selecng Bluetooth mode again.
Mute off speaker output
8
How to operate the remote control
30 30
Infrared emission window
USB
OPT
PC
AUX
Remote control iIIustraon
78
Standby buon
Mute
Play/pause
Previous/
next track
Line In input
Bluetooth input
(Bluetooth)
6
Volume control buons
1
Volume up/down Adjust playing volume
Playback selecon buons
Audio source selecon buons
7
Play/Pause in
Bluetooth input
Previous/next track in
Bluetooth input
Standby/power on
2
3
4
5
LINE
Aim the remote control at the remote control receiving
window on the speaker.
When the system receives remote control commands,
the indicator will alert color or flash.
Note:
1. The baery life is normally about 6 months; please replace it when the remote control is
not sensive or the control distance to be shortened.
2. Remove the baery immediately when exhausted to avoid explosion or acid leaks.
3. Discard the baery immediately in the event of baery leakage, paying aenon not to
touch the leaking materials.
If leaking is in contact with skin or gets in eyes/mouth, rinse immediately and seek emergency
treatment immediately. Please clean the baery compartment thoroughly prior to installing
new baery.
4. Never use the remote control in condions below:
– Places with high humidity, e.g. a bathroom
– Places with high temperature, e.g. near a heater or stove
– Places with extremely low temperature
– In dusty places
5. Remove the baery when unused for a long period of me to avoid baery leakage.
6. Do not use this product when baery compartment is not securely closed, and keep the
remote control away from children.
7. There is a cell baery inside this product, if swallowed it will cause serious bodily injury;
possibly death in 2 hours. Never let children touch the baery.
8. If the baery is accidentally swallowed, rush to hospital immediately.
1. Insert a coin into the slot and rotate
counter-clockwise to open the baery
compartment.
2. Install the new baery, close baery
compartment and rotate the cover
clockwise to close the compartment.
Open Close
Installing baery in remote control
1
2
3
45
6
7
8

RL
RL
Connect to playback devices
Connect to power source
Speaker placement
109
AIRPULSE P100X
Bluetooth
Preparaons Playback instrucon
CD player/music player
/audio decoder, etc.
PC or Mac
CD player
RCA audio cable
2. Bluetooth input: Please switch to Bluetooth input mode, and set your Bluetooth
device to search for and connect to "AIRPULSE P100X".
* Connect the power cable included to power input port on the rear panel, and then
insert power plug into the mains socket on the ground or on the wall.
* Refer to the "Power switch" on page 6 to turn on/off the speaker, and press the
" " buon on the remote control to switch to Standby/Power on state.
(Note: Turning off the power switch will only turn the amplifier off, and power source
is sll available. To thoroughly turn the speaker off, please unplug the power cable
from the mains socket.)
* Place the speaker on a solid, leveled and steady surface.
* The speaker with compact and delicate look can be easily carried around. It can
also be placed on desktop, in bedroom, in living room, or at any other indoor
corners. Make your room full of vitality.
1. Line In input: Insert the RCA audio cable included into the "LINE IN" port on the
speaker; then connect the RCA audio cable to your playback device.
Note:
* Pin code for connecon is "0000" if needed.
* For inial pairing, the blue light will flash, and will be steady lit aer pairing is successful. If
the blue light flashes in a breathing paern, it means the pairing failed, please pair again.
Operaons may be different among different devices, please refer to the operaonal
instrucons aached with the devices.
* Effecve Bluetooth connecon distance is within 10 meters.
* The Bluetooth of P100X can only be searched and connected in Bluetooth input. The exisng
Bluetooth connecon will be disconnected once the speaker is switched to line in input.
When switched to Bluetooth input, the speaker will try to connect to the Bluetooth device
connected last me.
* To disconnect Bluetooth, press and hold the " " buon on the remote control for over 2
seconds, or press and hold the "VOLUME/INPUT" dial on the front panel of the speaker.
* To enjoy all Bluetooth funcons please ensure your audio device has A2DP(Advanced Audio
Distribuon Profile) and AVRCP(Audio Video Remote Control Profile) profiles.
* When connected to this product, Bluetooth connecvity and funcons may be different
among different Bluetooth devices, depending on soware sengs of Bluetooth devices.

Playing
11 12
Playback instrucon Specificaons/statement
1. For line in input, please ensure the orange light is lit; if not, please press the
"VOLUME/INPUT" dial to select line in input, then press the playing buon on
your device to play music, and adjust volume to a desired level with the
"VOLUME/INPUT" dial.
2. For Bluetooth input, please ensure the blue light is lit and the speaker and Bluetooth
device are paired (if not, please follow the pairing method menoned above to
complete pairing.), then press the playing buon on your device or on music APP to
play music, and adjust volume to a desired level with the "VOLUME/INPUT" dial.
In Bluetooth input mode, press the " "/ " " buon on the remote control
to skip to previous/next track, and press the " " buon to pause/play songs.
* It is recommended to set your player volume at a relavely high level, then use
the volume adjustment on the speaker to control the enre volume for opmum
effect.
* Please set the speaker volume at the minimum level prior to playing.
Tweeter: Airblade Tweeter
Mid-Woofer: 4.5 inch Aluminum Cone Mid-Woofer
Amplifier System: Digital Amplifier
Power Output: Treble: 10W+10W
Mid-Woofer: 40W
Frequency Range: 52Hz-22KHz
Signal-Noise Rao: L/R: ≥90dB(A)
Input Mode: Line In, Bluetooth
Mains Voltage: 100-240V AC 50/60Hz
Dimension (WxHxD): 300 x 179 x 215mm
Net Weight: 5.1 Kg(11.3 Pounds)
NOTICE: For the need of technical improvement and system upgrade, informaon
contained herein may be subject to change from me to me without prior noce.

Troubleshoong
No sound
• Check if the speaker is powered on.
• Try to turn up the volume using either the master volume control or remote control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speaker.
• Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
• Make sure the speaker is switched to Bluetooth input, in other audio input mode Bluetooth can
not be paired or connected. Disconnect from any Bluetooth device by press and hold the " "
buon in Bluetooth mode, and then try again.
• Effecve Bluetooth transmission range is 10 meters, please make sure operaon is within the
range.
• Try another Bluetooth device for connecon.
The P100X does not turn on
• Check if mains power is connected, or if the wall outlet is switched on.
Noise coming from speaker
• AIRPULSE speakers generate lile noise, while the background noise of some audio devices are
too high. Please unplug audio cables and turn the volume up, there should be no sound can be
heard at 1 meter away from this product.
• Move digital equipment or high-frequency equipment far away from this product.
If you want to find out more about AIRPULSE, please visit our website at www.airpul-
seaudio.com
13

P100X
Printed in China
Dongguan Platinum Audio Systems Co., LTD.
OFF ON

1 2
1.
4.
6.
9.
11.
14.
17.
19.
1.
Pour retourner
2.
4.
21.
22.
24.

3 4
5
6
7
8
9
9
9
10
10
11
12
13
1.
2.
ion ; dernier sera .

56
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INPU T
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INP UT
RL

78
8
30 30
USB
OPT
PC
AUX
6
1
7
2
4
1.
de
6.
1.
1
2
4
6
7

109
RL
RL
Bluetooth
Lecteur de CD/lecteur de
musique/décodeur audio,
etc.
PC ou Mac
Câble audio RCA
2.
*
entre
*
1.
*
*

11 12
2.
*

13
Other manuals for P100X
1
Table of contents
Languages:
Other AIRPULSE Speakers System manuals