AirTouch ZoneTouch3 User manual

airtouch.net.au
User Manual

Suits Your Dećor

Contents
Getting Started
Quick Start 2
Quick Menu & Controls 4
Adjusting Airow for a Zone 5
Setting a Program 6
Turbo Zone 8
Setting up Favourites 10
ZoneTouch App 12
Advanced System Settings
Setting Date & Time 16
Console Colour 17
Naming Your Zones 18
Screen Lock 19
Owner’s Name 20
WiFi Setup & Software Update 21
Local Password 22
Troubleshooting 24
S p e c i  c a t i o n s 26
1User Manual | Edition 1, April 2021

2www.airtouch.net.au
Quick Start - Console
The console sleeps after 60 Seconds.
Zone Name & Airow Percentage
Push and hold any area of a tile with
zone name for 2s to activate the airow
percentage bar.
Slide the bar to adjust airow.
Zone Status
Tap the tile with the zone name
to turn on or o the zone
On
O
Turb o
Program
Spill
FavouritesRoom Temperature Quick Menu
Button

3User Manual | Edition 1, April 2021
Quick Start - Mobile App
Home Screen
Airow Screen
Some Settings & Zone names setup
on the ZoneTouch Console will be
replicated in the App.

4www.airtouch.net.au
Quick Menu & Controls
Access the Quick Menu by tapping on the
menu icon in the top right.
You can access common ZoneTouch 3
features using the Quick Menu.

5User Manual | Edition 1, April 2021
Adjusting Airow for a Zone
The percentage sliding bar will revert to the tile button if other
buttons are touched or no actions are taken for 5 seconds.
Push and hold any area of a tile for 2 seconds
to activate the airow percentage bar.
Slide a nger on the bar to adjust
opening percentage.

6www.airtouch.net.au
Setting a Program
A more advanced version of the Timer function is
the Program function, letting you turn the airow
ON or OFF for your entire house or individual zones.
Open the Quick Menu and select Programs.
1

7User Manual | Edition 1, April 2021
2Programs
Touch the +button
to add a program
(up to eight programs)
Tick the Days when
the program will be
repeated
Use Delete
button to
remove an
unused
program
Use Copy and
Paste buttons
to create new
programs which
have similar
settings
Tick the Groups which will
use the program.
Use Disable/Enable button
to deactivate/activate the
program. When the program is
disabled, its settings will be kept
in the system but the On/O
action will not be carried out.
Touch the On and O
areas to set the time
Touch the Name area
to rename the program

8www.airtouch.net.au
Turbo Zone
For high volumes of conditioned
air in a single zone.
ZoneTouch’s Turbo Zone feature can condition
a single zone quickly; or can be useful when there
is a lot of activity and you need more conditioned
air than normal.
Open the Quick Menu and
select System settings.
1
2Tap on Turbo Group and a drop-down menu will appear.
Select which room you want a larger volume of air.

9User Manual | Edition 1, April 2021
To activate the Turbo function, tap on the button again.
Turbo function activated.
Turbo function set but
not activated.
The Turbo function cannot be programmed.
It is activated manually when needed.
3
ON Turbo OFF

10 www.airtouch.net.au
Setting up Favourites
ZoneTouch’s Favourites feature allows you to
save your climate control scenarios.
Open the Quick Menu and
select Favourites.
1
Create up to four Favourite presets. Select whether
you want each zone ON or OFF.
2

11User Manual | Edition 1, April 2021
Give your Favourite(s) option a name and you’re
good to go!
3

12 www.airtouch.net.au
Install the ZoneTouch 3 App through the Apple App Store or
Google Play Store.
After downloading the application, run the app to control.*
ZoneTouch 3 is compatible with:
• iOS 10.0 and above
• Android 5.0 and above
ZoneTouch 3 App
The ZoneTouch 3 App can be downloaded free of charge.
*ZoneTouch 3 console can only be connected to 2.4GHz network. Mobiles have
to be on the same 2.4GHz as the console to run the ZoneTouch app.

13User Manual | Edition 1, April 2021

System
Settings

16 www.airtouch.net.au
Setting Date & Time
Select time zone and set date and time.
Select Preferences. Select Set Date Time to set date, time
and time zone from the pop up menu.
2
Open the Quick Menu and
select System settings.
1

17User Manual | Edition 1, April 2021
Console Colour
Choose the background colour to suit the home décor.
There are six dierent colours available.
Select Preferences. Select colour from the Display
Theme drop down menu.
2
Open the Quick Menu and
select System settings.
1

18 www.airtouch.net.au
Naming your Zones
*Zones are referred to as Groups in System Settings.
Customise ZoneTouch’s Zone Names to suit your home.
*Zones are referred to as Groups in System Settings.
Select Group Names and edit individual Groups by
tapping on the space provided to enter information.
To make it easy a preset name can be selected by
selecting Name List.
2
Open the Quick Menu and
select System settings.
1