aivituvin AIR 14 User manual

INSTRUCTION
MANUAL
AIR 14
www.aivituvin.com
X

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
30MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
P5
02
M3.5x45mm SCREW
M3.5x40mm SCREW
M5.0x45mm BOLT
12PCS+1spare
4PCS+1spare
12PCS+1spare
P6
2PCS+1spare
M3.5x25mm SCREW
12PCS+1spare
M3.0x16mm SCREW
1PC
Roof hinge

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
D E F
G
1PC
1PC 1PC
03
HI
1PC
2PCS
1PC
1PC
1PC
Front panel
Back panel Left side panel
Right side panel
1PC Roof
The Bottom Floor
The Middle Floor
Ramp Roof Overhang

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
J K L
M N
2PCS
1PC 1PC
04
4PCS
2PCS Normal casters
Step supporting bar
Brake casters
The middle step
The Bottom Step

PRODUCT ASSEMBLY
01
02
06
①Attach Part L into the panel D from the inner by 1xP4 on the upper
position and 1xP1 on the down position.
②Repeat the same ways for 4 bars.
Screw Part H from the inner by 2xP2 screws.
P2X
P4X
1 X 4
D
Lx4
H
2
D
P1X
1 X 4

PRODUCT ASSEMBLY
03
04
07
Attach Part A, Part C, Part D, Part B by 12xP3 screws.
Put 2 pieces of bottom floor Part F into the house.
P3
X12
A
B
C
Fx2
D

PRODUCT ASSEMBLY
05
06
08
①Attach the ramp Part G to the middle floor Part E by 2xP5 screws.
②And then put into the house.
Screw Part K and Part J to Part L by 8xP4 screws.
K
E
G
P
5
X2
P
4
X8
J

PRODUCT ASSEMBLY
07
08
09
①Attach the roof Part I to the house by 6xP5 screws.
②Notive to level up the hinge.
③Screw the normal casters 2xN to the back legs of house.
①Attach the roof hinge P6 to the roof panel and left side panel by
4xP5 screws.
②Screw the brake castres 2xM to the front legs of house.
P
5
X6
Mx2
Nx2
P
5
X4
P
6
X1
I

HELP CENTER
[email protected]
Question about your product? we're here to help contact us via
Returns & Refunds
?
Product AssemblyOrders FAQProduct inquiry
THANK YOU
Thanks for your support to Aivituvin.
Your satisfaction is our #1 priority.
Once the items are received, opened, and deemed to be faulty
or other problems.
Pls contact us at [email protected] for the solution.
We will feedback to you within 24 hours.
If you are happy with the shopping ,welcome to share photos
and thoughts with others .
www.aivituvin.com
12

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.