Aiwa HV-DH1 EH User manual

aiiua
HV-DH1eh
DVD PLAYER/STEREO VIDEO
CASSETTE RECORDER
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
ISTRUZIONI PER LUSO
MANUAL DEL USUARIO
GEBRUIKSAANWIJZINGEN
020502AMK-U-L
sxs. iffl H E3 EBS showView*

Safety Precautions / Important notes on controlling this unit

Contents

Front Panel and Display Window
| ^ Disc Tray
STOP( ■ )
TapeCompartmenTl ' " ^
in
□ 4 - l i 1
L i '9 o0g©6o 1 ^
1 DVD/VCR
Point the remote control here.

si. Electrostatic discharge may cause permanent

Connections

fs;i^r;r„rr,-jr,'" u ' v o "
Select a TV channel number on which you wish to
4 S^r^S^nstructlon boo k I,
5
'IptiS'r

Before Operation - VCR part
Setting the clock Manually
The clock in your VCR controls time and date
settings for your VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a Teletext
signal. If the broadcast signal is weak the clock
will not be set and will require setting manually.
J Press ® /SETUP.
Press OK/ENTER.
The auto adjust mode can be set to “OFF’ by pressing
A or Y if you want to set the time manually.
Press OK/ENTER.
To set the colour system
J Press ©/SETUP.
Q Press ◄ or ► to select the SYSTEM .
O OK/ENTER.
£ Press ▲ or Y to select according to t
: ©/SETUP.

Before Operation - VCH parT
How to use the main menu
This VCR can easily be programmed by using the
menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
3
Press ◄ or ► to select COUNTRY.
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, ErSpain, F:France,
I: Italy, N:Norway, NL:Nertherlands, P:Portugal,
SrSweden, SF:Finland, Others)
Press OK/ENTER again to start the automatic tun-
• DECODER - To use a pay-TV decoder (or Satellite)
with your VCR (see p. 30).
• OPR - To improve the playback picture
(see p. 20).
3
4
; OK/ENTER ;
; ®/SETUP to
£ The TV STATION TABLE will appear when tuning is
Press (D/SETUP to save your settings.
‘HP

Before Operation - VCR part
Tuning in TV Stations Manually
In certain areas of the country broadcast signals
may be too weak for your VCR’s automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually in order for your VCR to store them,
f Press ®/SETUP.
Press OK/ENTER.
STATION so that you n
m Press OK/ENTER.

Before Operation - DVD part
General Explanation
Temporary Feedback Field Icons
IP

Before Operation (Continued) - DVD part
Initial Settings
You can set your own Personal Preferences on this unit.
Initial Settings General Operation
Press 0/SETUP.
Language
Disc Language d
Select a language for the disc’s Menu, Audio, and
Original: The original language set for the disc is selected.
Other: To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
Menu Language
Select a language for the setup menu. This is the me
you see when you press ©/SETUP.
Picture
TV Aspect 4^9
4:3 Letterbox: Select when a standard 4:3 TV is con-
above and below the picture.

CAUTION
DO NOT select “DOLBY DIGITAL/PCM” or
“Stream/PCM” for the “Digital Audio Output” in the
equipped with a Dolby Digital decoder or DTS
Merely attempting to play a disc may cause a
screeching noise which could be harmful to your
ears and damage the speakers. In this case, be
sure to select “PCM” for the “Digital Audio
Output”.

Operation with tape
Playing a tape
You will only be able to load and eject video cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
tapes (on PAL TV).
Getting a better picture
When a cassette is inserted and playback started, the
automatic tracking function works to get the best
possible picture automatically. If the quality of the
recording is poor, repeatedly press CH/TRACKING A
or ▼ on the remote control or CHANNEL A or V
on the front panel to manually adjust the tracking
until any distortions have been removed. Press num¬
bered 0 on the remote control to switch automatic
tracking back on again.
1 VCR as described earlier in this book.
Turn on your TV.
Press POWER to turn on your VCR.
JE Slow motion playback, Shuttle :
V During playing back or still picture press < or ► .
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
6
end playback.
s tape is reached, your VCR will stop
OPR (Optimum Picture Response)
This feature automatically improves playback pic
quality by adjusting your VCR to the condition o
J Press ©/SETUP.
^Press.or.toseiec
g Press OK/ENTER.
4
5
Press ▲ or ▼ repeatedly
SHARP.
Please note you may on
playing a tape.
Press ©/SETUP return t<
ily
select: OFF, SOFT or
set OPR when