ENGLISH ESPAÑOL FRANÇAIS
CONNECTIONS
First turn down the volume of the cassette car stereo.
• Connect the DC-602 to the 5~6V DC jack of the
compactdiscplayerandtothe cigarette lightersocket
a.
• Connecttheplugof the CAP-6 to the PHONES/LINE
OUT jack of the compact disc player and insert the
CAP-6 into the slot of the cassette car stereo b.
CAP-6 CAR AUDIO CASSETTE ADAPTOR
• TheCAP-6is designed only forside-loadingcassette
carstereo.Insert the CAP-6 totheslot of the cassette
car stereo in the direction of the arrow on the CAP-6.
• The CAP-6 may not be compatible with some
cassette car stereos.
• If the CAP-6 is ejected from the cassette car stereo,
change the playback direction of the cassette car
stereo and insert the CAP-6 again.
DC-602 CAR BATTERY ADAPTOR
• Check first if the metal tip of the DC-602 pops up by
spring action when you press it down and release it.
O c
• When you replace the fuse (1 amp.) of the DC-602,
remove the cap of the DC-602 by turning it
counterclockwise.
• Use the DC-602 only with an Aiwa compact disc
player.
SPECIFICATIONS
CAR AUDIO CASSETTE ADAPTOR
Frequency range 50 – 20,000 Hz (It may differ
depending on type of your cassette
car stereo.)
Cord length 1.5 m (4 feet 11 inches)
Dimensions 102.4 (W) ×12.1 (H) ×63.8 (D) mm
(4 1/8×1/2×2 5/8inches)
Weight Approx. 41 g (1.4 oz)
CAR BATTERYADAPTOR
Input voltage DC 12 V/24 V
Output voltage DC 6 V 300 mA
Cord length 1.5 m (4 feet 11 inches)
Weight Approx. 53 g (1.9 oz)
Specifications and external appearance are subject to
change without notice.
For the compact disc player operation, please refer the
attached OPERATING INSTRUCTIONS ofthecompact
disc player.
DC 5~6V
PHONES/
LINE OUT
DC-602
CAP-6