
6
Safety Information
The components included in this package are
prone to damage from electrostatic discharge
[ESD]. Please adhere to the following instructions
to ensure successful device assembly.
Ensure that all components are securely connected. Loose
connections may cause the device to not recognize a
component or fail to start.
Hold the device rmly when assembling or operating.
It is recommended to discharge yourself of static electricity
by touching another metal object before
handling the device.
Store the device in an electrostatic free environment
whenever the device is not in use.
Do not assemble or operate the device before
reading the user manual. This might cause
permanent damage to the components as well as
injury to the user.
If you need help during installation step, please
consult support via phone or Online help-desk.
Always turn o the device before storing the device.
Keep this user manual for future reference.
Keep this device away from humidity.
Make sure that your electrical outlet provides the same
voltage as is indicated on the Charger before connecting to
the electrical outlet.
All cautions and warning on the device and in the user
manual should be noted.
If any of the following situations arises, get the device
checked by service personnel:
Liquid has penetrated into the device.
The device has been exposed to moisture.
The device does not work well or you can not get it work
according to user manual.
The device has been dropped or damaged.
The device has obvious sign of breakage.
Do not leave the device in an environment above
60°C (140°F), it may damage the device.
Where to nd more information
Refer to the following sources for additional information
and for product and software updates.
1. AJAX websites:
The AJAX website provides updated information on AJAX
hardware and software products. Refer to the AJAX contact
information.
2. Optional documentation:
Your product package may include optional
documentation, such as warranty iers, that may have been
added by your dealer. These documents are not part of the
standard package.