
6
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the product from the box.
2. Remove any packaging from the
product.
3. Please retain all packaging until you
have checked and counted all the
parts and the contents against the
parts list.
4. Your appliance is now ready for
normal use.
CHARGING YOUR HEADPHONES
For best results, fully charge the unit
before use.
Connect one end of the included USB
cable into your computer (or a device
made for USB charging), and the other
end into the headphone’s charging port,
which is under the left ear cap.
1. The LED light will turn red while
charging.
2. It will take about 2 hours if charging
on an empty battery.
3. The LED light will turn off once it’s
finished charging.
4. Unplug the USB cable from the
headphone and charging device.
5. A fully charged battery can last up to
16 hours of use (talking/listening to
audio).
Note: Your earphones cannot be used
while charging.
Note: When the battery is low the LED
Light will flash red.
POWERING ON/OFF & NOISE CANCELLATION
1. Press the ON/OFF button to turn the
headphones on, and the LED light will
turn green to show it’s powered on.
2. Press the ON/OFF button again to
turn the appliance off. The LED light
will turn off.
3. Noise Cancellation: This feature
activates when the headphones are
turned ON via the ON/OFF switch, and
turns OFF when ON/OFF button is
pressed again.
PLAYING MUSIC
1. To listen to music, connect one end of
the audio cable into the audio jack of
your music device.
2. Plug the other end into the
headphone’s audio jack.
3. Press the ON/OFF button to turn the
headphones on.
4. Control playback and volume on the
in-line remote.
5. Turn the headphones off when
finished using them.
Note: When using on a plane, please use a
2-pin Plane adaptor.
DO’S AND DON’TS
• Do not play music at excessive
levels as damage to hearing and/or
equipment may result.
• Do not use in wet or in damp
surroundings.
• Do not play music at excessive level
especially near children.