
66
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the product from the box.
2. Remove any packaging from the
product.
3. Please retain all packaging until you
have checked and counted all the
parts and the contents against the
parts list.
4. Your appliance is now ready for
normal use.
CHARGING YOUR HEADPHONES
For best results, fully charge the unit
before use.
1. To charge the unit, connect one end
of the included USB cable into your
computer or a compatible USB mains
adaptor, and the other end into the
charging port of the earphones.
2. A red indicator light will turn on to
indicate the unit is charging.
3. It takes approximately 2-3 hours for
the earphones to fully charge.
4. The red indicator will turn off once
the earphones are fully charged.
Note: Your earphones cannot be used
while charging.
POWERING ON/OFF
• Press and hold the On/Off/Function
button for approximately 4 seconds to
turn the unit on. The unit’s indicator
light will flash red and blue to
indicate the unit is in operation.
• Press this button for approximately 4
seconds while the unit is in operation
to turn it off.
PAIRING TO YOUR SMART DEVICE
1. Press the On/Off/Function button
for about 4 seconds to activate
the Bluetooth function. The unit’s
indicator light will alternately flash
red and blue to indicate the Bluetooth
function has been selected.
2. Turn on the Bluetooth function on the
source device.
3. Search for Bluetooth devices and
select ‘A58090’.
4. Enter the code ‘0000’ if required.
5. The unit’s indicator will flash blue to
signal the pairing was successful.
Note: You will need to pair the Bluetooth
Headphones to your device before your
first use. After that, the earphones will
connect to your device automatically when
they are switched on.
Hold the On/Off/Function button for about
2-3 seconds until the blue indicator light
starts flashing to connect the earphones
to the smart device automatically.
Once the headset is paired with your
device you can stream audio wirelessly
through the headphones. Should you
encounter any problems while streaming
please refer your device’s user manual for
further information.
HANDS-FREE CALLING
Note: In the event of an incoming
call, music playback will be stopped
automatically, so that the call may be
answered.
ANSWERING A CALL
Press the Phone button when a call is
incoming to answer it hands-free.
ADJUSTING CALL VOLUME
Press the Previous/Vol – or Next/Vol
+ buttons while in a call to adjust call
volume.