Akai AK-BT117 GB User manual

AK-BT117 GB
AK-BT117 BL
In-ear Wireless
Headphone
入耳式無線耳機
ワイヤレスステレオ
ヘッドフォン

LED指示燈
開機/關機/配對/啟動/暫停
/接聽/掛斷/拒接/重播
音量-/上一曲目
USB charging port
① Volume + 按鈕
② (Multi-function button) MFB按鈕
③ Volume - 按鈕

1、開機
要求在關機狀態下，長按MFB鍵4秒，藍牙耳機將進入開機模式，藍牙耳機喇
叭發出開機提示音，紅燈閃一次。
2、關機
要求在待機狀態下長按MFB鍵4秒，藍牙耳機將進入開機模式，藍牙耳機喇叭
發出開機提示音，紅燈閃一次。
3、配對（鏈接AK-BT117）
在關機狀態下，長按MFB鍵4秒，藍牙耳機將進入開機模式，藍牙耳機喇叭發
出開機提示音，開機後自動進入配對模式，藍紅燈交替快閃
4、Mute（送話閉音鍵）
在通話中，快速雙擊MFB鍵
使用藍牙耳機功能
1、接聽電話：當手機來電時，短按MFB鍵來接聽來電
2、掛斷電話：當藍牙耳機在通話狀態時，段按MFB鍵掛斷電話
3、拒接電話：當手機來電時，長按MFB鍵2秒拒接來電
4、重撥電話
要求藍牙耳機在待機或播放音樂狀態下，連續短按MFB鍵2次，藍牙耳機將自
動重撥手機撥出的最後一組電話
5、音量調整
藍牙耳機在通話和播放音樂模式下，短按V+或V-健調節音量
（1）要求在音樂播放模式或通話式下，短按v+鍵，手機音量同步加大
（2）要求在音樂播放模式或通話模式下，短按V-鍵，手機音量同步減小
開/關機、配對以及連接

6音樂操作
播放：音樂播放時，短按MFB鍵1次，播放手機音樂
暫停：音樂播放時，短按MFB鍵1次，暫停播放手機音樂
上一曲：音樂播放時，長按V-鍵，播放上一曲音樂
下一曲：音樂播放時，長按v+鍵，播放下一曲音樂
產品及其配件包括
耳機x1，可替換耳帽x2，耳翼x1，USB充電線x1
狀態 指示燈
關機狀態 紅、藍燈均熄滅
藍牙耳機開機時 藍燈閃 3次
藍牙耳機關機時 紅燈閃 1次
配對狀態 紅、藍燈交替閃爍
待機狀態 藍燈每 10 秒閃 1次
低電待機狀態 紅燈每次 5秒閃 1次
充電狀態 紅燈長燈
充電完成 紅燈熄滅，藍燈亮
手機來電 藍燈每 10 秒閃 1次

藍牙耳機磁力吸附功能
藍牙耳機不在使用狀態時，可使用耳機磁力吸附功能將耳機環繞在頸
警告
1、使用配送的數據線為藍牙耳機充電，使用其他數據線會對藍牙耳機
造成損壞。
2、藍牙耳機配有吸鐵石功能，如客戶體內有金屬板或電子設備，請咨詢
醫生意見後，選購或使用該款藍牙耳機。
Magnetic Adsorption Function
Magnetic Adsorption Function
Built-in magnets let you easily stow your Earbuds by wearing them around
your neck, a convenient way to carry around.

產品規格
藍牙規格：V4.1
支持協議：A2DP、AVRCP、HFP、HSP
藍牙工作距離：Max 10 meters
充電電壓：USB 5V
阻抗：32±15% ohm
頻率範圍：2.402GHz-2.480KHz
頻响：20Hz-20Khz
電池容量：80mAH 3.7V
麥克風靈敏度：-45±3dB
工作時長：談話 : 5 hours / 音樂播放 : 4.5 hours
待機時長：150 hours
充電時長：1.5-2hours
Cauon:
1、Please charge the Bluetooth Earbuds with the original USB cable.
2、This Bluetooth Earbuds with Magnet inside. If customer has metal
plate or electronic equipment in the body, please consult your doctor,
before you use or buy this Bluetooth Earbuds.

1) Introducon the funcon of each buon
Mul-Funcon Buon (MFB)
Pause/Play Music (shortly press once)
Answer/End a call (shortly press once)
Reject a call (Press MFB for 2-3 Seconds)
Re-dial (shortly press twice)
Re-connecon (shortly press once)
Pairing acvaon (long press unl LED light flashes)
Micro USB charging Port
1.5~2.0Hours (Full power)
Volume Buons
Volume +/- (shortly press)
Previous / Next song (long press to skip to previous/next song)
Indicator light
Red light: charging
Blue light: fully Charged
Red light flashes twice and voice prompts up: low baery
Red and blue light flashes alternately: pairing status
Blue light flashes every 5 seconds: standby status
Turn On (Press down MFB ll blue light flashes)
Turn OFF (Press down MFB ll red light flashes)

2) How to connect with a mobile phone?
1.Turn on AK-BT117
2.Long press mul-funcon buon for about 5 seconds
3.When blue light flashes, keep pressing unl red and blue light
flashes alternately
4.Turn on Bluetooth of mobile, select pair name of headset
“AK-BT117” to connect
5.When blue light flashes alternately it is connected successfully
3) How to connect with a computer?
1. Download a Bluetooth driver and install it
2. Insert a Bluetooth adapter / Open Bluetooth in computer
3. Power on Bluetooth headset and long press mul-funcon buon
around 5 seconds ll red and blue lights flash alternately
(pairing status)
4. Select pair name “AK-BT117” to connect
5. Inial password: 0000 (if applicable)
4) How to connect with two mobile phones?
1. Power on Bluetooth headset and long press mul-funcon buon
for about 5 seconds ll red and blue lights flash alternately
(pairing status)
2. Open Bluetooth of mobile phone A and to select pair name
“AK-BT117” to connect

3. Long press mul-funcon buon ll red light flashes, turn off
Bluetooth headset
4. Turn off Bluetooth of mobile phone A
5. Power on Bluetooth headset and long press mul-funcon buon
around 5 seconds ll red and blue lights flash alternately
(pairing status)
6. Open Bluetooth of mobile phone B and to select pair name
“AK-BT117” to connect
7. Open Bluetooth of mobile phone A and re-connect to “AK-BT117”
Working range up to 10 meters
Please make sure all Bluetooth devices connected within 10 meters in
an open area to avoid disturbance or disconnecon
Reconnecon
Opon 1: Press mul-funcon buon
Opon: 2: Reconnect in mobile Bluetooth manual
Restore to default configuraon
1.Long press mul-funcon buon during charging
2.It restores to default config when red and blue light alternavely
flashes 3 mes
5) Trouble shoong
1.Unable to locate the pair name of headset?

Possible causes：
1. Bluetooth headset is not under pairing status
2. Bluetooth program error with Bluetooth headset
3. Bluetooth program error with mobile phone
Soluon：
1.Turn on Bluetooth headset and long press mul-funcon buon to
acvate Bluetooth pairing. (Blue and red light flashes alternavely)
2. Restore to default config
3. Restart mobile phone
Tips:
1. Pair status will be standby for 3 minutes pls connect within that
period otherwise Bluetooth headset will power off automacally
2. During charging status press mul-funcon buon for 5 seconds
unl blue and red light flashes 3 mes
3.Clear up all Bluetooth pairing names in mobile phone aer reboot
No sound from Bluetooth headset
Possible causes：
1. Bluetooth headset / mobile Volume too low
2. Not connected properly
3. Bluetooth headset is outside working range.
Soluon：
1. Press “+” to volume up;
2. Re-connect it
3. Make sure it is within 10 meters in an open area.

Aenon:
1. Volume up or down anyme during connecon
2. Do not use other funcon during pairing to avoid program error
To get the best performance pls use it near the paired Mobile
Sound quality is not good.
Possible Causes：
1. WIFI is connected with mobile phone
2. Poor signal of mobile phone
Soluons：
1. Turn off WIFI;
2. Repair the Mobile phone
Tips:
1.WIFI disturbs transmission of Bluetooth headset
2. Poor signal will affect performance of Bluetooth headset
Red Indicator light is not on when charging.
Possible causes：
1. Bluetooth headset has not been used for a long me.
Soluon：
Aer charged it for 30 minutes and see if it’s on
Tips：
Overcharging, Bluetooth headset in a closed car in such a similar
environment will reduce the baery capacity and lifeme

Specificaons:
Bluetooth standard: V4.1
Bluetooth profiles: A2DP、AVRCP、HFP、HSP
Bluetooth working range: Max 10 meters
Charge voltage: USB 5V
Impedance: 32±15% ohm
Frequency range: 2.402GHz-2.480GHz
Frequency response: 20Hz-20Khz
Baery capacity: 80mAH 3.7V
Microphone sensivity: -45±3dB
Talk me: 5 hours / Music play back : 4.5 hours
Standby me: 150 hours
Charging me: 1.5 ~ 2 hrs (full power)