Alarm Lock A-100 - A-100IMWP User manual

Self-contained stainless steel
keypads for single door access
control
Alarm Lock A-Series family of keypads is designed to control access of a single
entry point for facilities with up to 150 users. Three rugged stainless steel
models are available to meet most residential and commercial environments.
Each user is assigned personal identifi cation number from three to six digits
long. Audible feedback verifi es each key press and all programming is easily
accomplished from the keypad, eliminating the need for additional software
packages. The non-volatile EEPROM memory retains all programmed entry
codes. Outputs #1 and #2 are Form C relay contacts, while output #3 is an open
collector transistor. Authorized door open time can be programmed for any
duration from 1 to 99 seconds.
A-Series: keypads
A-100
Indoor Stainless Steel Keypad
A-100WP
Outdoor Sealed Environment
Keypad
A-100IMWP
Outdoor Illuminated
Mullion Keypad

345 Bayview Ave, Amityville, New York 11701
1-800-ALA-LOCK • Fax [phone] • www.alarmlock.com
NAPCO 7/2006 ALA479
A-100 Indoor Stainless Steel Keypad
The A-100 is a self-contained keypad de-
signed for indoor applications. It provides
single door access control for residential and
commercial environments. Its heavy stainless
steel faceplate is designed to mount on a
standard single-gang electrical box.
Features
• Self-contained
• Stainless steel
faceplate
• Mounts on a single-
gang box
• 150 user codes
available
• 3 to 6 digit user
codes
• Keypad
programmable
• Non-volatile
EEPROM memory
• Selectable audible
keypad feedback
• Operates up to three outputs (2 relays & 1
open-collector) and can be used to trigger a
door strike, an electromagnetic door lock, or
any other relay-activated device.
Specifi cations
Dimensions: (WxHxD): 3” x 4 3/8” x 7/8”
(7.6cm x 11.1cm x 2.2cm)
Voltage: 12 to 24VDC (polarized) or 12 to
24VAC voltage input
Operating Voltage: 9VDC to 28VDC, 10VAC
to 26 VAC
Maximum Current Draw:
12VDC: 13mA (Standby) 48mA (Active)
24VDC: 20mA (Standby) 58mA (Active)
12VAC: 30mA (Standby) 100mA (Active)
24VAC: 50mA (Standby) 121mA (Active)
Outputs:
Output # 1: 5A/250VAC relay
Output # 2: 3A/125VAC relay
Output # 3: 250mA open collector
Operating Temperature: -13°F to 131°F,
(-25°C to +55°C)
Capacity: 150 User Codes of 3 to 6 digits
Programming Storage: Non-volatile EEPROM
memory
Output Activation Duration: Programmable
from 01-99 seconds
Output #1 Relay Activation Duration:
Programmable per user code
Tamper Switch Output: Terminals (S1 - S2) on
PCB
Sounder Feedback: Beeps can be activated or
deactivated
A-100WP Outdoor Sealed Environment
Keypad
The A-100WP is a self-contained keypad
designed for the harshest outdoor
environments. It provides single door
access control for residential and
commercial environments. Its heavy
stainless enclosure and metal keypad
buttons also make it extremely vandal
resistant.
Features
• Self-contained
• Sealed
electronics
package for
outdoor re-
quirements
• Metal keypad
buttons with
Braille mark-
ings
• Vandal resistant
• 150 user codes
available
• 3 to 6 digit user codes
• Keypad programmable
• Non-volatile EEPROM memory
• Selectable audible keypad feedback
• Operates up to three outputs (2 relays & 1
open-collector) and can be used to trigger a
door strike, an electromagnetic door lock, or
any other relay-activated device.
Specifi cations
Dimensions (WxHxD): 4” x 4 3/4” x 2”
(10.1cm x 12cm x 5cm)
Voltage: 12 to 24VDC (polarized) or 12 to
24VAC voltage input
Operating Voltage: 9VDC to 28VDC, 10VAC
to 26 VAC
Maximum Current Draw:
12VDC: 15mA (Standby) 54mA (Active)
24VDC: 22mA (Standby) 67mA (Active)
12VAC: 32mA (Standby) 108mA (Active)
24VAC: 54mA (Standby) 129mA (Active)
Outputs:
Output # 1: 5A/250VAC relay
Output # 2: 5A/250VAC relay
Output # 3: 250mA open collector
Operating Temperature: -13°F to 131°F,
(-25°C to +55°C)
Capacity: 150 User Codes of 3 to 6 digits
Programming Storage: Non-volatile EEPROM
memory
Output Activation Duration: Programmable
from 01-99 seconds
Output #1 Relay Activation Duration:
Programmable per user code
Tamper Switch Output: Terminals (S1 - S2) on
PCB
Sounder Feedback: Beeps can be activated or
deactivated
A-100IMWP Outdoor Illuminated
Mullion Keypad
The A-100IMWP is a self-contained
access control keypad designed for
outdoor applications. Its heavy stainless
mullion-style surface mount enclosure
is designed to be used in narrow stile
applications.
Features
• Self-contained
• Mullion-style surface
mount enclosure
• Narrow stile application
• Illuminated keypad
• Waterproof
• 150 user codes available
• 3 to 6 digit user codes
• Keypad programmable
• Non-volatile EEPROM
memory
• Selectable audible keypad
feedback
• Operates up to three
outputs (2 relays & 1
open-collector) and can
be used to trigger a door
strike, an electromagnetic
door lock, or any other
relay-activated device.
Specifi cations
Dimensions (WxHxD): 1 3/4” x 6 1/2” x 1 1/8”
(4.4cm x 16.5cm x 2.9cm)
Voltage: 12 to 24VDC (polarized) or 12 to
24VAC voltage input
Operating Voltage: 9VDC to 28VDC, 10VAC
to 26 VAC
Maximum Current Draw:
12VDC: 15mA (Standby) 108mA (Active)
24VDC: 21mA (Standby) 125mA (Active)
12VAC: 33mA (Standby) 192mA (Active)
24VAC: 54mA (Standby) 233mA (Active)
Outputs:
Output # 1: 5A/250VAC relay
Output # 2: 1A/125VAC relay
Output # 3: 250mA open collector
Operating Temperature:
-13°F to 131°F, (-25°C to +55°C)
Capacity: 150 User Codes of 3 to 6 digits
Programming Storage: Non-volatile EEPROM
memory
Output Activation Duration: Programmable
from 01-99 seconds
Output #1 Relay Activation Duration:
Programmable per user code
Keypad Illumination: Duration Programmable
from 10-99 seconds
Tamper Switch Output: Terminals (S1 - S2) on
PCB
Sounder Feedback: Beeps can be activated or
deactivated