Techni Mobili RTA-9300B User manual

PARTS LIST
ATTENTION: Before you begin to assemble the
product, please make sure that all the parts are
included in the package and in good condition.
ASSEMBLY INSTRUCTIONS
CHAIR STYLE RTA-9300B
Before seating and using the chair for the first time, make sure
that all screws are properly tightened.
5-Star base
Backrest
Mechanism
Hydraulic
Gas Lift
Covers for
Gas Lift (Set)
Casters
F
x5
Seat
M6x14mm
M6x16mm
Allen Wrench
M5
(Backrest)
(Mechanism)
E
x1
H
x4
G
x1
D
x1
C
x1
A
x1
B
x1
I
x4
J
x4
K
x1
ATTENTION:
• Follow the instructions step by step.
• To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
• Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
• Using the wrong size of screws on a part could result in damage to the screw or the part
1 2
34
Washers
(Backrest to Seat)
E
G
F
C
Insert the casters (F) into the legs of the base (C) using pressure,
then place the gas lift (E) in the middle of the base, and cover it
with (G) as shown.
Assemble the backrest (A) to the seat (B) using screws (H) and
washers (J) as shown.
Using screws (I), assemble the mechanism (D) to the seat (B)
with its handle facing to the RIGHT as shown.
Place the seat over the base, making sure the tip of the gas lift
enters into the hole of the mechanism.
(Seat is shown upside-down with its front end towards you)
H
B
A
J
(Seat is shown upside-down with its front end towards you)
I
B
D

CHAIR’S FUNCTIONS:
To raise or lower the chair’s height, pull UP the lever that is under the seat. The chair goes down while
sitting on it, or up if you lift your body.
NOTE: This chair does not recline.
WARNINGS:
•Do not stand up on the chair or use it as ladder.
•Use the chair to seat only one person at a time.
•Do not use the chair if parts are damaged or if screws are loose or missing.
•Do not seat near the edge of the seat and always sit properly on the chair to avoid going beyond your balance point and fall off the chair.
•The chair is intended for teenagers and adults. If small children are using the chair, please keep close observation on them.
•Do not allow small children to play with the chair.
•Not paying attention to these warnings could result in severe injuries.
CARE AND MAINTENANCE:
•To clean the chair it is recommended to use a soft cloth lightly damped in a solution of smooth soap and water, then dry with a clean towel.
•Do not use solvents or abrasive materials to clean any part of the chair.
•Before applying a cleaning agent, test on a small hidden area of the chair, like underneath the seat.
•Do not expose the product to direct sunlight or to extreme environmental conditions.
•Every 4 months, inspect the chair completely and make sure that all screws are tighten.