Alcatel-Lucent 5620 User manual

Alcatel-Lucent 5620
SERVICE AWARE MANAGER | RELEASE 11.0 R5
MPR USER GUIDE
3HE 08459 AAAA TQZZA Edition 01
Alcatel-Lucent Proprietary
This document contains proprietary information of Alcatel-Lucent and is not to be disclosed
or used except in accordance with applicable agreements.
Copyright 2013 © Alcatel-Lucent. All rights reserved.
MPR USER GUIDE

When printed by Alcatel-Lucent, this document is printed on recycled paper.
Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is
subject to change without notice.
Alcatel, Lucent, Alcatel-Lucent, the Alcatel-Lucent logo, lightRadio, and TiMetra are registered
trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.
Copyright 2013 Alcatel-Lucent.
All rights reserved.
Disclaimers
Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design
engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous
environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life-support machines, or weapons
systems, in which the failure of products could lead directly to death, personal injury, or severe physical
or environmental damage. The customer hereby agrees that the use, sale, license or other distribution
of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at
the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from
any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the
use, sale, license or other distribution of the products in such applications.
This document may contain information regarding the use and installation of non-Alcatel-Lucent
products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent
tries to ensure that this information accurately reflects information provided by the supplier, please refer
to the materials provided with any non-Alcatel-Lucent product and contact the supplier for
confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete
information provided about non-Alcatel-Lucent products.
However, this does not constitute a representation or warranty. The warranties provided for
Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by
Alcatel-Lucent and its customers.
This document was originally written in English. If there is any conflict or inconsistency between the
English version and any other version of a document, the English version shall prevail.

iii
Alcatel-Lucent License Agreement
SAMPLE END USER LICENSE AGREEMENT
1. LICENSE
1.1 Subject to the terms and conditions of this Agreement, Alcatel-Lucent grants
to Customer and Customer accepts a nonexclusive, nontransferable license to
use any software and related documentation provided by Alcatel-Lucent
pursuant to this Agreement ("Licensed Program") for Customer's own internal
use, solely in conjunction with hardware supplied or approved by
Alcatel-Lucent. In case of equipment failure, Customer may use the Licensed
Program on a backup system, but only for such limited time as is required to
rectify the failure.
1.2 Customer acknowledges that Alcatel-Lucent may have encoded within the
Licensed Program optional functionality and capacity (including, but not
limited to, the number of equivalent nodes, delegate workstations, paths and
partitions), which may be increased upon the purchase of the applicable license
extensions.
1.3 Use of the Licensed Program may be subject to the issuance of an application
key, which shall be conveyed to the Customer in the form of a Supplement to
this End User License Agreement. The purchase of a license extension may
require the issuance of a new application key.
2. PROTECTION AND SECURITY OF LICENSED PROGRAMS
2.1 Customer acknowledges and agrees that the Licensed Program contains
proprietary and confidential information of Alcatel-Lucent and its third party
suppliers, and agrees to keep such information confidential. Customer shall not
disclose the Licensed Program except to its employees having a need to know,
and only after they have been advised of its confidential and proprietary nature
and have agreed to protect same.
2.2 All rights, title and interest in and to the Licensed Program, other than those
expressly granted to Customer herein, shall remain vested in Alcatel-Lucent or
its third party suppliers. Customer shall not, and shall prevent others from
copying, translating, modifying, creating derivative works, reverse
engineering, decompiling, encumbering or otherwise using the Licensed
Program except as specifically authorized under this Agreement.
Notwithstanding the foregoing, Customer is authorized to make one copy for
its archival purposes only. All appropriate copyright and other proprietary
notices and legends shall be placed on all Licensed Programs supplied by
Alcatel-Lucent, and Customer shall maintain and reproduce such notices on
any full or partial copies made by it.
3. TERM
3.1 This Agreement shall become effective for each Licensed Program upon
delivery of the Licensed Program to Customer.

iv
3.2 Alcatel-Lucent may terminate this Agreement: (a) upon notice to Customer if
any amount payable to Alcatel-Lucent is not paid within thirty (30) days of the
date on which payment is due; (b) if Customer becomes bankrupt, makes an
assignment for the benefit of its creditors, or if its assets vest or become subject
to the rights of any trustee, receiver or other administrator; (c) if bankruptcy,
reorganization or insolvency proceedings are instituted against Customer and
not dismissed within 15 days; or (d) if Customer breaches a material provision
of this Agreement and such breach is not rectified within 15 days of receipt of
notice of the breach from Alcatel-Lucent.
3.3 Upon termination of this Agreement, Customer shall return or destroy all
copies of the Licensed Program. All obligations of Customer arising prior to
termination, and those obligations relating to confidentiality and nonuse, shall
survive termination.
4. CHARGES
4.1 Upon shipment of the Licensed Program, Alcatel-Lucent will invoice
Customer for all fees, and any taxes, duties and other charges. Customer will
be invoiced for any license extensions upon delivery of the new software
application key or, if a new application key is not required, upon delivery of
the extension. All amounts shall be due and payable within thirty (30) days of
receipt of invoice, and interest will be charged on any overdue amounts at the
rate of 1 1/2% per month (19.6% per annum).
5. SUPPORT AND UPGRADES
5.1 Customer shall receive software support and upgrades for the Licensed
Program only to the extent provided for in the applicable Alcatel-Lucent
software support policy in effect from time to time, and upon payment of any
applicable fees. Unless expressly excluded, this Agreement shall be deemed to
apply to all updates, upgrades, revisions, enhancements and other software
which may be supplied by Alcatel-Lucent to Customer from time to time.
6. WARRANTIES AND INDEMNIFICATION
6.1 Alcatel-Lucent warrants that the Licensed Program as originally delivered to
Customer will function substantially in accordance with the functional
description set out in the associated user documentation for a period of 90 days
from the date of shipment, when used in accordance with the user
documentation. Alcatel-Lucent's sole liability and Customer's sole remedy for
a breach of this warranty shall be Alcatel-Lucent's good faith efforts to rectify
the nonconformity or, if after repeated efforts Alcatel-Lucent is unable to
rectify the nonconformity, Alcatel-Lucent shall accept return of the Licensed
Program and shall refund to Customer all amounts paid in respect thereof. This
warranty is available only once in respect of each Licensed Program, and is not
renewed by the payment of an extension charge or upgrade fee.

v
6.2 ALCATEL-LUCENT EXPRESSLY DISCLAIMS ALL OTHER
WARRANTIES, REPRESENTATIONS, COVENANTS OR CONDITIONS
OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF
WORKMANSHIP, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, DURABILITY, OR THAT THE OPERATION
OF THE LICENSED PROGRAM WILL BE ERROR FREE OR THAT THE
LICENSED PROGRAMS WILL NOT INFRINGE UPON ANY THIRD
PARTY RIGHTS.
6.3 Alcatel-Lucent shall defend and indemnify Customer in any action to the
extent that it is based on a claim that the Licensed Program furnished by
Alcatel-Lucent infringes any patent, copyright, trade secret or other intellectual
property right, provided that Customer notifies Alcatel-Lucent within ten (10)
days of the existence of the claim, gives Alcatel-Lucent sole control of the
litigation or settlement of the claim, and provides all such assistance as
Alcatel-Lucent may reasonably require. Notwithstanding the foregoing,
Alcatel-Lucent shall have no liability if the claim results from any modification
or unauthorized use of the Licensed Program by Customer, and Customer shall
defend and indemnify Alcatel-Lucent against any such claim.
6.4 Alcatel-Lucent Products are intended for standard commercial uses. Without
the appropriate network design engineering, they must not be sold, licensed or
otherwise distributed for use in any hazardous environments requiring fail safe
performance, such as in the operation of nuclear facilities, aircraft navigation
or communication systems, air traffic control, direct life-support machines, or
weapons systems, in which the failure of products could lead directly to death,
personal injury, or severe physical or environmental damage. The Customer
hereby agrees that the use, sale, license or other distribution of the Products for
any such application without the prior written consent of Alcatel-Lucent, shall
be at the Customer's sole risk. The Customer also agrees to defend and hold
Alcatel-Lucent harmless from any claims for loss, cost, damage, expense or
liability that may arise out of or in connection with the use, sale, license or
other distribution of the Products in such applications.
7. LIMITATION OF LIABILITY
7.1 IN NO EVENT SHALL THE TOTAL COLLECTIVE LIABILITY OF
ALCATEL-LUCENT, ITS EMPLOYEES, DIRECTORS, OFFICERS OR
AGENTS FOR ANY CLAIM, REGARDLESS OF VALUE OR NATURE,
EXCEED THE AMOUNT PAID UNDER THIS AGREEMENT FOR THE
LICENSED PROGRAM THAT IS THE SUBJECT MATTER OF THE
CLAIM. IN NO EVENT SHALL THE TOTAL COLLECTIVE LIABILITY
OF ALCATEL-LUCENT, ITS EMPLOYEES, DIRECTORS, OFFICERS OR
AGENTS FOR ALL CLAIMS EXCEED THE TOTAL AMOUNT PAID BY
CUSTOMER TO ALCATEL-LUCENT HEREUNDER. NO PARTY SHALL
BE LIABLE FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL
DAMAGES, WHETHER OR NOT SUCH DAMAGES ARE
FORESEEABLE, AND/OR THE PARTY HAD BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
7.2 The foregoing provision limiting the liability of Alcatel-Lucent's employees,
agents, officers and directors shall be deemed to be a trust provision, and shall
be enforceable by such employees, agents, officers and directors as trust
beneficiaries.

vi
8. GENERAL
8.1 Under no circumstances shall either party be liable to the other for any failure
to perform its obligations (other than the payment of any monies owing) where
such failure results from causes beyond that party's reasonable control.
8.2 This Agreement constitutes the entire agreement between Alcatel-Lucent and
Customer and supersedes all prior oral and written communications. All
amendments shall be in writing and signed by authorized representatives of
both parties.
8.3 If any provision of this Agreement is held to be invalid, illegal or
unenforceable, it shall be severed and the remaining provisions shall continue
in full force and effect.
8.4 The Licensed Program may contain freeware or shareware obtained by
Alcatel-Lucent from a third party source. No license fee has been paid by
Alcatel-Lucent for the inclusion of any such freeware or shareware, and no
license fee is charged to Customer for its use. The Customer agrees to be
bound by any license agreement for such freeware or shareware. CUSTOMER
ACKNOWLEDGES AND AGREES THAT THE THIRD PARTY SOURCE
PROVIDES NO WARRANTIES AND SHALL HAVE NO LIABILITY
WHATSOEVER IN RESPECT OF CUSTOMER'S POSSESSION AND/OR
USE OF THE FREEWARE OR SHAREWARE.
8.5 Alcatel-Lucent shall have the right, at its own expense and upon reasonable
written notice to Customer, to periodically inspect Customer's premises and
such documents as it may reasonably require, for the exclusive purpose of
verifying Customer's compliance with its obligations under this Agreement.
8.6 All notices shall be sent to the parties at the addresses listed above, or to any
such address as may be specified from time to time. Notices shall be deemed
to have been received five days after deposit with a post office when sent by
registered or certified mail, postage prepaid and receipt requested.
8.7 If the Licensed Program is being acquired by or on behalf of any unit or agency
of the United States Government, the following provision shall apply: If the
Licensed Program is supplied to the Department of Defense, it shall be
classified as "Commercial Computer Software" and the United States
Government is acquiring only "restricted rights" in the Licensed Program as
defined in DFARS 227-7202-1(a) and 227.7202-3(a), or equivalent. If the
Licensed Program is supplied to any other unit or agency of the United States
Government, rights will be defined in Clause 52.227-19 or 52.227-14 of the
FAR, or if acquired by NASA, Clause 18-52.227-86(d) of the NASA
Supplement to the FAR, or equivalent. If the software was acquired under a
contract subject to the October 1988 Rights in Technical Data and Computer
Software regulations, use, duplication and disclosure by the Government is
subject to the restrictions set forth in DFARS 252-227.7013(c)(1)(ii) 1988, or
equivalent.
8.8 Customer shall comply with all export regulations pertaining to the Licensed
Program in effect from time to time. Without limiting the generality of the
foregoing, Customer expressly warrants that it will not directly or indirectly
export, reexport, or transship the Licensed Program in violation of any export
laws, rules or regulations of Canada, the United States or the United Kingdom.

vii
8.9 No term or provision of this Agreement shall be deemed waived and no breach
excused unless such waiver or consent is in writing and signed by the party
claimed to have waived or consented. The waiver by either party of any right
hereunder, or of the failure to perform or of a breach by the other party, shall
not be deemed to be a waiver of any other right hereunder or of any other
breach or failure by such other party, whether of a similar nature or otherwise.
8.10 This Agreement shall be governed by and construed in accordance with the
laws of the Province of Ontario. The application of the United Nations
Convention on Contracts for the International Sale of Goods is hereby
expressly excluded.

viii

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 ix
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Preface
The Preface provides general information about the 5620 Service Aware Manager
documentation suite, including this guide.
Prerequisites
Readers of the 5620 SAM documentation suite are assumed to be familiar with the
following:
•5620 SAM software structure and components
•5620 SAM GUI operations and tools
•typical 5620 SAM management tasks and procedures
•device and network management concepts
5620 SAM documentation suite
The 5620 SAM documentation suite describes the 5620 SAM and the associated
network management of its supported devices. Contact your Alcatel-Lucent support
representative for information about specific network or facility considerations.
Table 1lists the documents in the 5620 SAM customer documentation suite.
Table 1 5620 SAM customer documentation suite
Guide Description
5620 SAM core documentation
5620 SAM Release
Description
The 5620 SAM Release Description provides information about the new features
associated with a 5620 SAM software release.
(1 of 5)

Preface
x September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
5620 SAM Release Notice The 5620 SAM Release Notice provides important information about the software
release, including outstanding issues and restrictions. This document is not shipped with
the on-product customer documentation and must be obtained from OLCS as described
in Documentation and resources on the web.
5620 SAM Planning Guide The 5620 SAM Planning Guide provides information about 5620 SAM scalability and
recommended hardware configurations.
5620 SAM System
Architecture Guide
The 5620 SAM System Architecture Guide is intended for technology officers, network
planners, and system administrators to increase their knowledge of the 5620 SAM
software structure and components. It describes the system structure, software
components, and interfaces of the 5620 SAM. In addition, 5620 SAM fault tolerance,
security, and network management capabilities are discussed from an architectural
perspective.
5620 SAM | 5650 CPAM
Installation and Upgrade
Guide
The 5620 SAM | 5650 CPAM Installation and Upgrade Guide provides OS considerations,
configuration information, and procedures for the following:
•installing, upgrading, and uninstalling 5620 SAM and 5650 CPAM software in
standalone and redundant deployments
•5620 SAM system migration to a different system
•conversion from a standalone to a redundant 5620 SAM system
5620 SAM User Guide The 5620 SAM User Guide provides information about using the 5620 SAM to manage the
service-aware IP/MPLS network, including GUI basics, service configuration, and policy
management.
The 5620 SAM User Guide uses a task-based format that employs both high-level
workflows and detailed procedures.
5620 SAM management information specific to LTE network elements is covered in the
5620 SAM LTE ePC User Guide and 5620 SAM LTE RAN User Guide.
5620 SAM management information specific to 1830 PSS network elements is covered in
the 5620 SAM Optical User Guide.
5620 SAM System
Administrator Guide
The 5620 SAM System Administrator Guide provides information about the tasks
performed by a user with a 5620 SAM admin role, including:
•5620 SAM security management tasks such as setting up all required user accounts
and user groups
•advanced configuration tasks such as configuring, maintaining, and administering
the 5620 SAM operational environment
•routine maintenance tasks to maintain the 5620 SAM hardware and system integrity
and efficiencies
5620 SAM Integration
Guide
The 5620 SAM Integration Guide provides procedures to allow the 5620 SAM to integrate
with other Alcatel-Lucent products and third-party products.
5620 SAM Supervision
Module User Guide
The 5620 SAM Supervision Module User Guide provides information about how to
configure and use the web-based 5620 SAM Supervision Module for fault management
and at-a-glance network element monitoring.
5620 SAM Scripts and
Templates Developer
Guide
The 5620 SAM Scripts and Templates Developer Guide provides information that allows
users to develop, manage, and run CLI-based or XML-based scripts or templates.
The guide is intended for developers, skilled administrators, and operators who are
expected to be familiar with the following:
•CLI scripting, XML, and the Velocity engine
•basic scripting or programming
•5620 SAM functions
Guide Description
(2 of 5)

Preface
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xi
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
5620 SAM Parameter
Guide
The 5620 SAM Parameter Guide provides:
•parameter descriptions that include value ranges and default values
•parameter options and option descriptions
•parameter and option dependencies
•parameter mappings to the 5620 SAM-O XML equivalent property names
Parameters specific to LTE network elements are covered in the 5620 SAM LTE
Parameter Reference.
Parameters specific to 1830 PSS network elements are covered in the 5620 SAM Optical
Parameter Reference.
The 5620 SAM online help system includes a Parameter Search Tool that allows you to
look up parameters or 5620 SAM and 5650 CPAM forms. See the 5620 SAM User Guide for
more information about using the Parameter Search Tool.
5620 SAM Statistics
Management Guide
The 5620 SAM Statistics Management Guide provides information about how to
configure performance and accounting statistics collection and how to view counters
using the 5620 SAM. Network examples are included.
5620 SAM Troubleshooting
Guide
The 5620 SAM Troubleshooting Guide provides task-based procedures and user
documentation to:
•help resolve issues in the managed and management networks
•identify the root cause and plan corrective action for:
•alarm conditions on a network object or customer service
•problems on customer services with no associated alarms
•list problem scenarios, possible solutions, and tools to help check:
•network management LANs
•network management platforms and operating systems
•5620 SAM client GUIs and client OSS applications
•5620 SAM servers
•5620 SAM databases
5620 SAM Alarm Reference The 5620 SAM Alarm Reference provides a description of all alarms supported on the
5620 SAM, including LTE and optical alarms, the raising and clearing conditions of each
alarm, and the remedial action to fix the problem. The reference is organized by
network element type.
5620 SAM Glossary The 5620 SAM Glossary defines terms and acronyms used in all of the 5620 SAM
documentation, including 5620 SAM LTE documentation.
5620 SAM Network
Element Compatibility
Guide
The 5620 SAM Network Element Compatibility Guide provides release-specific
information about the compatibility of managed devices in 5620 SAM releases. This
document is updated regularly; always consult the latest version on OLCS as described
in Documentation and resources on the web.
5620 SAM MPR documentation
5620 SAM MPR User Guide The 5620 SAM MPR User Guide describes how to discover, configure, and manage
9500 MPR and 9500 MPRe devices using the 5620 SAM. The guide is intended for network
planners, administrators, and operators and is to be used in conjunction with other
guides in the 5620 SAM documentation suite where management of 9500 MPR and
9500 MPRe devices does not differ from other network elements.
Alcatel-Lucent recommends that you review the entire 5620 SAM MPR User Guide
before you attempt to use the 5620 SAM in your MPR network.
5620 SAM LTE documentation
5620 SAM LTE Release
Description
The 5620 SAM LTE Release Description provides information about the LTE features
associated with the release.
Guide Description
(3 of 5)

Preface
xii September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
5620 SAM LTE ePC User
Guide
The 5620 SAM LTE ePC User Guide describes how to discover, configure, and manage
LTE ePC devices using the 5620 SAM. The guide is intended for LTE ePC network
planners, administrators, and operators and is to be used in conjunction with other
guides in the 5620 SAM documentation suite where management of ePC devices does not
differ from other network elements.
Alcatel-Lucent recommends that you review the entire 5620 SAM LTE ePC User Guide
before you attempt to use the 5620 SAM in your LTE network.
5620 SAM LTE RAN User
Guide
The 5620 SAM LTE RAN User Guide describes how to discover, configure, and manage
the Evolved NodeB, or eNodeB, using the 5620 SAM. The guide is intended for LTE RAN
network planners, administrators, and operators and is to be used in conjunction with
other guides in the 5620 SAM documentation suite where management of RAN devices
does not differ from other network elements.
Alcatel-Lucent recommends that you review the entire 5620 SAM LTE RAN User Guide
before you attempt to use the 5620 SAM in your LTE network.
5620 SAM LTE Parameter
Reference
The 5620 SAM LTE Parameter Reference provides a list of all LTE ePC and LTE RAN
parameters supported in the 5620 SAM.
5620 SAM LTE OSS
Interface Developer Guide
The 5620 SAM LTE OSS Interface Developer Guide provides information about
developing LTE OSS applications, including information about the 3GPP OSS interface
components and architecture, understanding the 5620 SAM-O schema in the context of
LTE, compliance with 3GPP standards, and typical operational scenarios.
5620 SAM optical documentation
5620 SAM Optical User
Guide
The 5620 SAM Optical User Guide describes how to discover, configure, and manage
optical devices using the 5620 SAM. The guide is intended for optical network planners,
administrators, and operators and is to be used in conjunction with other guides in the
5620 SAM documentation suite where management of optical devices does not differ
from other network elements.
Alcatel-Lucent recommends that you review the entire 5620 SAM Optical User Guide
before you attempt to use the 5620 SAM in your optical network.
5620 SAM Optical
Parameter Reference
The 5620 SAM Optical Parameter Reference provides a list of all optical device
parameters supported in the 5620 SAM.
5620 SAM-O documentation
5620 SAM XML OSS
Interface Developer Guide
The 5620 SAM XML OSS Interface Developer Guide provides information that allows you
to:
•use the 5620 SAM XML OSS interface to access network management information
•learn about the information model associated with the managed network
•develop OSS applications using the packaged methods, classes, data types, and
objects necessary to manage 5620 SAM functions
5650 CPAM documentation
5650 CPAM Release
Description
The 5650 CPAM Release Description provides information about the new features
associated with a 5650 CPAM software release.
5650 CPAM Release Notice The 5650 CPAM Release Notice provides important information about the 5650 CPAM
software release and corresponding 7701 CPAA software release, including outstanding
issues and restrictions. This document is not shipped with the on-product
documentation and must be obtained from OLCS as described in Documentation and
resources on the web.
5650 CPAM User Guide The 5650 CPAM User Guide describes how to capture, inspect, visualize, and
troubleshoot IGP and BGP topologies using the 5650 CPAM.
7701 CPAA Hardware
Revision 1 Setup and
Software Installation
Instructions
The 7701 CPAA Hardware Revision 1 Setup and Software Installation Instructions
describes the hardware setup and software installation for the 7701 CPAA Hardware
Revision 1, the route analyzer component of the 5650 CPAM.
Guide Description
(4 of 5)

Preface
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xiii
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Obtaining customer documentation
You can obtain 5620 SAM customer documentation:
•from the product
•on the web
On-product documentation
The 5620 SAM on-product customer documentation is delivered in HTML and PDF.
Choose Help→User Documentation from the 5620 SAM client GUI to open the help
system in a web browser. For best results, use Internet Explorer or Firefox.
The help system opens to the User Documentation Index, which provides a summary
of and links to all 5620 SAM customer documents.
Click on the Using the help system tab on the User Documentation Index page to find
usage tips for navigating and searching within the on-product customer
documentation.
You can return to the User Documentation Index at any time by clicking on the Home
icon, shown in Figure 1.
Figure 1 Home icon
Documentation and resources on the web
The 5620 SAM customer documentation is available for download in PDF format
from the Alcatel-Lucent Customer Support Center:
http://www.alcatel-lucent.com/myaccess. If you are a new user and require access to
this service, please contact your Alcatel-Lucent support representative.
Release Notices and any other documents not delivered on-product are posted to this
site.
5620 SAM product alerts
Product technical alerts are used to communicate important information to customers
about released loads. You can view and subscribe to product alerts for the 5620 SAM
from the Alcatel-Lucent Customer Support Center.
7701 CPAA Hardware
Revision 2 Setup and
Software Installation
Instructions
The 7701 CPAA Hardware Revision 2 Setup and Software Installation Instructions
describes the hardware setup and software installation for the 7701 CPAA Hardware
Revision 2, the route analyzer component of the 5650 CPAM.
Guide Description
(5 of 5)

Preface
xiv September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Working with PDFs
You can download PDFs of individual guides from the Alcatel-Lucent Customer
Support Center, or you can choose to download a zip of all PDFs for a particular
release.
You can use the Search function of Acrobat Reader (File→Search) to find a term in
a PDF of any 5620 SAM document. To refine your search, use appropriate search
options (for example, search for whole words only or enable case-sensitive
searching). You can also search for a term in multiple PDFs at once, provided that
they are located in the same directory. For more information, see the Help for
Acrobat Reader.
Documentation conventions
Table 2lists the conventions that are used throughout the documentation.
Table 2 Documentation conventions
Procedures with options or substeps
When there are options in a procedure, they are identified by letters. When there are
substeps in a procedure, they are identified by Roman numerals.
Note — Users of Mozilla browsers may receive an error message
when opening the PDF files in the 5620 SAM documentation suite.
The offline storage and default cache values used by the browsers are
the cause of the error message.
Alcatel-Lucent recommends changing the Mozilla Firefox offline
storage or Mozilla 1.7 cache value to 100 Mbytes to eliminate the
error message.
Convention Description Example
Key name Press a keyboard key Delete
Italics Identifies a variable hostname
Key+Key Type the appropriate consecutive keystroke sequence CTRL+G
Key–Key Type the appropriate simultaneous keystroke sequence CTRL–G
* An asterisk is a wildcard character, which means “any
character” in a search argument.
log_file*.txt
↵Press the Return key ↵
— An em dash indicates there is no information. —
→Indicates that a cascading submenu results from selecting a
menu item
Policies→Alarm
Policies

Preface
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xv
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Example of options in a procedure
At step 1, you can choose option aor b. At step 2, you must do what the step
indicates.
1This step offers two options. You must choose one of the following.
aThis is one option.
bThis is another option.
2You must perform this step.
Example of substeps in a procedure
At step 1, you must perform a series of substeps within a step. At step 2, you must
do what the step indicates.
1This step has a series of substeps that you must perform to complete the step. You
must perform the following substeps.
iThis is the first substep.
ii This is the second substep.
iii This is the third substep.
2You must perform this step.
Measurement conventions
Measurements in this document are expressed in metric units and follow the Système
international d’unités (SI) standard for abbreviation of metric units. If imperial
measurements are included, they appear in brackets following the metric unit.
Table 3lists the measurement symbols used in this document.
Table 3 Bits and bytes conventions
Measurement Symbol
bit b
byte byte
kilobits per second kb/s

Preface
xvi September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Important information
The following conventions are used to indicate important information:
Warning — Warning indicates that the described activity or situation
may, or will, cause equipment damage or serious performance
problems.
Caution — Caution indicates that the described activity or situation
may, or will, cause service interruption.
Note — Notes provide information that is, or may be, of special
interest.

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xvii
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Contents
Preface ix
Prerequisites............................................................................................ ix
5620 SAM documentation suite ...................................................................... ix
Obtaining customer documentation .............................................................. xiii
On-product documentation ......................................................... xiii
Documentation and resources on the web ....................................... xiii
Documentation conventions.........................................................................xiv
Procedures with options or substeps ...............................................xiv
Measurement conventions ........................................................... xv
Important information................................................................xvi
Getting started
1 — What’s new? 1-1
1.1 New 5620 SAM features for 9500 MPR/9500 MPRe devices ....................... 1-2
1.2 What’s new in 5620 SAM Release 11.0 .............................................. 1-2
2 — 9500 MPR/9500 MPRe overview 2-1
2.1 5620 SAM management of 9500 MPR/9500 MPRe devices......................... 2-2
MSS-1 shelf ............................................................................ 2-2
MSS-4 and MSS-8 shelves ............................................................ 2-3
9500 MPR/9500 MPRe card support................................................ 2-3
Fan tray................................................................................ 2-3
ODU..................................................................................... 2-3
XPIC .................................................................................... 2-3

Contents
xviii September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
9500 MPR LAG objects ............................................................... 2-3
9500 MPR services and service tunnel support .................................. 2-3
9500 MPR/9500 MPRe NEtO support ............................................... 2-4
9500 MPRe support................................................................... 2-5
2.2 Workflow to manage 9500 MPR/9500 MPRe devices ............................... 2-6
9500 MPR/9500 MPRe management
3 — 9500 MPR/9500 MPRe device commissioning and
management 3-1
3.1 9500 MPR/9500 MPRe device commissioning and management overview ...... 3-2
9500 MPR/9500 MPRe management ............................................... 3-2
9500 MPR radio link discovery and management ................................ 3-3
3.2 Workflow to commission 9500 MPR/9500 MPRe devices .......................... 3-5
3.3 9500 MPR/9500 MPRe device commissioning and management
procedures ........................................................................ 3-5
Procedure 3-1 To commission a 9500 MPR/9500 MPRe for 5620 SAM
management .................................................................... 3-6
Procedure 3-2 To configure polling for 9500 MPR/9500 MPRe
devices ........................................................................... 3-9
Procedure 3-3 To enable 5620 SAM management of
9500 MPR/9500 MPRe devices ................................................ 3-9
4 — 9500 MPR/9500 MPRe object configuration 4-1
4.1 9500 MPR/9500 MPRe object configuration overview ............................. 4-2
4.2 Workflow to configure and manage 9500 MPR/9500 MPRe device
objects ............................................................................. 4-2
4.3 9500 MPR/9500 MPRe device object configuration procedures .................. 4-2
Procedure 4-1 To configure system settings on a 9500 MPR .................. 4-2
Procedure 4-2 To resolve 9500 MPR MIB inconsistencies ...................... 4-3
Procedure 4-3 To start the 9500 MPR/9500 MPRe external element
manager from the 5620 SAM GUI............................................. 4-4
Procedure 4-4 To configure a scope of command role for NEtO
access ............................................................................ 4-5
5 — 9500 MPR LAG object configuration 5-1
5.1 Working with 9500 MPR device LAG objects ........................................ 5-2
9500 MPR device LAG objects ...................................................... 5-2
5.2 Workflow to configure and manage 9500 MPR device LAG objects ............. 5-3
5.3 9500 MPR device LAG configuration procedures ................................... 5-3
Procedure 5-1 To create a radio L1 or L2 LAG or Ethernet LAG on the
9500 MPR ........................................................................ 5-3
Procedure 5-2 To delete a 9500 MPR LAG ....................................... 5-5

Contents
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xix
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
6 — 9500 MPR/9500 MPRe shelf object configuration 6-1
6.1 9500 MPR/9500 MPRe shelf object configuration overview ...................... 6-2
6.2 Working with shelf objects on 9500 MPR/9500 MPRe devices.................... 6-2
6.3 Working with card and card slot objects on 9500 MPR/9500 MPRe
devices ............................................................................. 6-2
9500 MPR card support .............................................................. 6-3
6.4 Workflow to manage shelf objects on 9500 MPR/9500 MPRe devices........... 6-7
6.5 9500 MPR/9500 MPRe shelf object configuration procedures .................... 6-8
Procedure 6-1 To migrate the 9500 MPRe connected to a 7705 SAR
from standalone mode to single NE mode.................................. 6-8
Procedure 6-2 To manage the 9500 MPR/9500 MPRe running
software ........................................................................ 6-10
Procedure 6-3 To configure a 9500 MPR basic or advanced fan tray ....... 6-11
Procedure 6-4 To configure 9500 MPR card protection....................... 6-12
Procedure 6-5 To remove 9500 MPR card protection ......................... 6-13
Procedure 6-6 To switch between a 9500 MPR in-service protected
radio link and a standby protected radio link ............................ 6-13
7 — 9500 MPR/9500 MPRe port object configuration 7-1
7.1 9500 MPR/9500 MPRe port configuration overview ................................ 7-2
IMA support ........................................................................... 7-2
9500 MPR Ethernet port QoS schemes ............................................ 7-2
7.2 Workflow to manage port objects on 9500 MPR/9500 MPRe devices ........... 7-3
7.3 Port configuration procedures ........................................................ 7-4
Procedure 7-1 To configure 9500 MPR/9500 MPRe Ethernet ports .......... 7-4
Procedure 7-2 To configure 9500 MPR 2 ×STM ports .......................... 7-6
Procedure 7-3 To configure 9500 MPR 1 ×STM (Channelized) ports ........ 7-7
Procedure 7-4 To configure 9500 MPR E1 and DS1 ports ...................... 7-9
Procedure 7-5 To configure 9500 MPR DS3 ports ............................... 7-9
Procedure 7-6 To configure 9500 MPR AUX alarm ports ...................... 7-10
Procedure 7-7 To configure a 9500 MPRe port................................. 7-11
Procedure 7-8 To configure analog performance management on
9500 MPR 1x radio modem ports ............................................ 7-12
Procedure 7-9 To configure power level performance management
on 9500 MPR 1x radio modem ports ........................................ 7-12
Procedure 7-10 To configure 9500 MPR port segregation .................... 7-13
Procedure 7-11 To configure 9500 MPR 2+2 ×Ethernet (EAS) card
slot power source type ....................................................... 7-14
Procedure 7-12 To add 9500 MPR port protection ............................ 7-15
Procedure 7-13 To remove 9500 MPR port protection ........................ 7-16
Procedure 7-14 To configure a loopback test on a 9500 MPR DS1,
ES1, or 1 x radio modem port ............................................... 7-16

Contents
xx September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
9500 MPR/9500 MPRe policy and service
management
8 — 9500 MPR/9500 MPRe QoS policies 8-1
8.1 9500 MPR/9500 MPRe QoS policies overview ....................................... 8-2
ATM QoS policies ..................................................................... 8-2
8.2 Workflow to configure 9500 MPR/9500 MPRe QoS policies ....................... 8-2
8.3 9500 MPR/9500 MPRe QoS policies procedures ..................................... 8-2
Procedure 8-1 To configure and distribute a 9500 MPR ATM QoS
policy............................................................................. 8-3
Procedure 8-2 To configure and distribute a 9500 Radio Interface
Queue Map policy .............................................................. 8-4
Procedure 8-3 To configure and distribute a 9500 NE QoS policy ........... 8-5
9 — 9500 MPR service management and service tunnels 9-1
9.1 9500 MPR service management overview ........................................... 9-2
Supported service types............................................................. 9-2
9500 MPR services support.......................................................... 9-3
9500 MPR/9500 MPRe service provisioning considerations and
constraints....................................................................... 9-5
9.2 9500 MPR service tunnel overview ................................................... 9-6
9500 MPR service tunnel (ERPS) support ......................................... 9-7
9.3 Ethernet (G.8032) rings ................................................................ 9-8
ERP topology .......................................................................... 9-8
9500 MPR ERPS tail node support on Ethernet (G.8032) rings................. 9-9
Supported ERP service types ...................................................... 9-10
9.4 Configuring service tunnels on 9500 MPR devices................................. 9-10
Procedure 9-1 To create an Ethernet radio ring element on a
9500 MPR ....................................................................... 9-10
10 — 9500 MPR VLAN service management 10-1
10.1 9500 MPR VLAN service management overview ................................... 10-2
Supported VLAN services types for 9500 MPR devices......................... 10-2
VLAN groups and paths ............................................................. 10-2
10.2 Workflow to create VLAN services on 9500 MPR devices ........................ 10-3
10.3 VLAN service management procedures for 9500 MPR devices .................. 10-4
Procedure 10-1 To create a VLAN group........................................ 10-4
Procedure 10-2 To create a 9500 MPR VLAN path ............................. 10-5
Procedure 10-3 To create a 9500 MPR (dot1q) VLAN service ................ 10-9
Procedure 10-4 To create a CoS rate limiter per VLAN on a
9500 MPR ..................................................................... 10-12
Procedure 10-5 To discover 9500 MPR VLAN services....................... 10-13
Procedure 10-6 To delete a VLAN group or group member ................ 10-13
Procedure 10-7 To delete a 9500 MPR VLAN path ........................... 10-14