Alderon Industries FLEX User manual

The Fle Conol Panel Simle i a conol anel caable of conolling and monioing one m and e eno
in. I can be conged a a e oa anel, o a a fo oa + one andce anel. Addiionall, i feae a
m eal fail eno in, ailia co in, and an oional cen eno in fo he m. Pm mode
conol (hand mode, off mode, and ao mode) ae conolled ia bon on he inne fon doo of he conol
anel. Fo conolling he m, he anel can be eied ih eihe conaco o ih a co aing elaceable
oe ela boad. The Fle Conol Panel can alo be conged fo demand doe o ime doe conol. An
ailia d conac o i alo inclded fo inefacing o emoe alam o o bilding aomaion em.
Thi anel alo feae a men em o enable maimm eld congaion a ell a hoogh aiic
acking. Finall, he anel can be conneced o Viie fo emoe acking, conol, and congaion.
Befoe oceeding ih he inallaion o oeaion of he conol anel ead all incion hooghl, a ell a
coml ih all Fedeal, Sae and Local Code, Reglaion and Pacice. The conol anel m be inalled b
alied eonnel familia ih all alicable local elecical and mechanical code. Refe o he Naional
Elecical Code (NFPA 70). Faile o oel inall and e hi odc can el in eonal inj o
eimen malfncion. All condi conneced o he anel m be ealed ih condi ealan o een
moie o gae fom eneing he anel. NEMA 1 encloe ae fo indoo e onl hile NEMA 4X anel
encloe ma be ed indoo o odoo. Refe o anel model name lae on inide of doo fo encloe aing.
Noe: If oion ae odeed ha affec he nmbe of oa, efe o he anel chemaic fo comlee infomaion.
Introduction
Before Installation
Safety Guidelines
1. DO NOT USE WITH FLAMMABLE OR EXPLOSIVE FLUIDS SUCH AS GASOLINE, FUEL OIL, KEROSENE,
ETC. DO NOT USE IN EXPLOSIVE ATMOSPHERES. CONTROL PANEL SHOULD ONLY BE USED IN
WATER AND WASTEWATER APPLICATIONS THAT ARE NOT RATED AS A HAZARDOUS LOCATION.
2. DO NOT WORK ON THE CONTROL PANEL WITH LIVE VOLTAGE APPLIED TO THE CONTROL PANEL
WITH WET HANDS OR WHEN STANDING ON A WET SURFACE.
3. DISCONNECT ALL ELECTRICAL SERVICE BEFORE WORKING ON OR HANDLING THE CONTROL PANEL
FLEX - Single Phase, Simplex
Model: FLXO1S | Opaque Door, Beacon
QSG00376_Rev02_FLEX Opaque Door Beacon 1P Simplex FLXO1S Series.pdf | January 17th, 2023 8:11am

The e ineface of he Fle Conol Panel comie a 162 OLED dila, hee RGB indicao LED, and a oa
knob (coll heel) ed o naigae he men em. While he em i idle, he men ceen ill be ned off
o conee he life of he dila. To ake i , iml make an in on he men naigaion knob.
The coll heel i ed fo all e in o he men em. Thi inclde naigaion, congaion in,
alam clea, and o on. Belo i a able mmaiing he ineface o he men em.
Action Result
Pressing the Knob Naigae Foad, Selec, Commi a Change, Clea an Alam
Scrolling Clockwise Naigae o he Righ, Inceae a Cong Vale
Scrolling Counter-
Clockwise Naigae o he Lef, Deceae a Cong Vale
Activating
Test/Silence Switch
Ei he men em and en o he main ceen. Noe ha hi ma
a he em e oine; o cancel, make an in ih he coll heel
4. INCOMING VOLTAGE MUST MATCH THE CONTROL PANEL VOLTAGE. REFER TO THE PANEL SCHE-
MATIC FOR COMPLETE INFORMATION.
Menu System
Interface
Navigating the Menu

Thee ae a e of ao indicao ha ill aea on he boom line of he dila o aid ih men naigaion.
Belo i a able mmaiing hee indicao:
Indicator Image Meaning
Right Arrow on
Bottom Right
The e can naigae foad o elec a cong
fom hee. Pe he coll heel o ake hi
acion.
Left Arrow on
Bottom Right
The e can naigae backad fom hee. Pe
he coll heel o ake hi acion.
Blinking Right
Arrow on Bottom
Left
A cong i being modied hen hi i hon.
Scoll he heel o change he cong. Pe he
coll heel o commi he change. To cancel he
in, eihe ai fo he imeo OR e he
e/ilence ich o ei he men.
Enter Arrow on
Bottom Right
Thi ao indicae a cong can be commied.
Pe he knob o commi OR cancel he in a
decibed in he en aboe.
Congaion on he Fle Conol Panel ae oganied ino a cong ah e ce imila o a le ah on a
come. All congaion "ah" ae of he e hon belo.
All congaion ae locaed behind he aod in he men. Afe he aod, congaion ae oganied
ino go, b-go, and indiidal congaion. The cong "ah" fo ee congaion i dilaed in he
able in Aailable Seing.
Pleae ee he Seing ecion of hi docmen fo an ehaie li of all aailable congaion.
Menu Conventions
To Change a Setting

To clea an alam, iml coll o i in he main ceen (e he e/ilence ich o jm hee) and hen e
he oa knob. A conmaion ceen ill aea and ak if he alam hold be cleaed. Pe he knob again o
clea he alam.
Noe ha if he alam immediael e-aciae and he be aciae again, hi mean ha he alam condiion
i ill een and he em canno clea he alam. If hi haen, check fo he oce of he alam.
Thi ecion ill coe all of he infomaion needed o ge a anel and nning fo i ecic alicaion. I ill
coe nning he Se Wiad, hich ill conge he mo imoan congaion, a ell a eeal
eamle of oional congaion ha can be ed o comie he alicaion. An ehaie li of
congaion can be fond in he Seing ecion of he Wiki (h://iki.aind.co/ ).
The Se Wiad ill e he ciical em congaion and ge a em and nning ickl. I ill
conge all in a ell a baic m congaion. Refer to the panel schematic to see what each input will
be configured as by default.
Run the Setup Wizard b folloing he men ah hon belo.
Thi ill conge all of he ima congaion fo he anel, inclding:
To Clear an Alarm
Quick Setup Guide
System Setup with the Setup Wizard
Step 1
Doing Te
Tandce Congaion
Floa Congaion
Pm Cen Monioing Congaion (onl on model ih cen ening)

Set Dosing Configuration. Thi conge he em fo Demand Doing o Time Doing. Note: this is the only
way to change this setting.
In Demand Doe Mode, if he a oa igge he m ill n coninol nil he o oa goe don.
In Time Doe Mode, hen he ime enable oa igge he em ill ime doe nil he ime enable oa goe
don. If hi oion i eleced, he em ill ak he e o conge all of he doe ime infomaion.
Enable or Disable the Transducer Input Thi ill conge In 5 o be eihe a 4-20 mA ee andce o a
egla oa in.
If he andce i enabled, he em ill hen ak he e o ene he baic andce congaion.
If he andce i diabled, he em ill ki he andce congaion oion.
Step 2 (In Setup Wizard)
Step 3 (In Setup Wizard)

Configure the Float Inputs. Thi ill conge he oa in of he em.
If he andce a enabled, he em ill ak hehe o no a 2-oa back hold be aciaed. Thi ill e
a Lo Alam/Redndan Off Floa and a High Alam/Redndan Sa Floa a back in cae he andce fail.
Oheie, if he andce a diabled, i ill ak he e o enable o diable he Lo Alam Floa.
Please refer to the panel schematic to see what each input will be configured as based on the above
configurations.
Enter Full Load Amps (FLA) for the pump (Only if the Panel Has A Current Sensor). Thi ill conge he high
and lo am alam oin fo he m. The em ill e he i oin a 25% aboe and belo he FLA
eneed hee. Noe ha boh high and lo am can be eld modied indiidall in he Pm Se U ecion of
he men.
Step 4 (In Setup Wizard)
Step 5 (In Setup Wizard)

Thee congaion ae no abolel ciical fo each alicaion, b can be efl fo comiing he
behaio of he anel.
Set the Pump Exercise Timer fo he m. If e, he eecie ime ill n he m fo a e amon of ime
afe i ha been idle fo he conged nmbe of da. B defal, he eecie ime i diabled.
Name Menu Path Value Description
Pump One
Exercise
Interval
MENU->SETTINGS-
>PASSWORD->PUMP SET
UP->PUMP 1->P1
EXERCISOR INT
Diabled -
45 Da
Thi i he eecie ime fo m one.
If he m ha been inacie fo he
indicaed nmbe of da, he em ill
bie n he m o mainain long
em m healh.
Pump One
Exercise
Time
MENU->SETTINGS-
>PASSWORD->PUMP SET
UP->PUMP 1->P1
EXERCISOR TIME
0:00 - 5:00
Thi i ho long in mine and econd
m one ill n ding an eecie
een.
Change The System Password. Thi ill change he aod fom he em defal of 1919.
Name Menu Path Value Description
Password
Change
MENU->SETTINGS->PASSWORD-
>SYSTEM SET UP->PASSWORD
0000 -
9999
Thi i he em aod. I
can be changed fom hee.
Review the Settings section of this manual fo an ohe congaion ha ma be elean o he alicaion.
The em a hi oin i conged fo a baic alicaion. Hoee, hee ae eeal ohe congaion
aailable in he em ha ma be efl deending on he ecic em eiemen.
Optional Configurations
Step 6 (Optional)
Step 7 (Optional)
Step 8 (Optional)

The Fle Conol Panel anel ack eeal aiic fo he em. Thee ae acceed hogh he men
em b folloing he men ah emlae hon belo. Secic ah fo each een' a ae decibed in
he Vieable Een ecion of he odc Wiki age.
Thee eing modif geneal em behaio, ch a ho long he be a ilenced, ho bigh he m
n LED ae, ec.
Name Menu Path Range Description
Automatic
Error Reset
MENU->SETTINGS-
>PASSWORD->SYSTEM
SET UP->AUTO ERROR
RESET
Diabled,
Enabled
If enabled, em eo een ill clea
hemele once he eo condiion ae
eoled. Noe ha hi doe no al
o m eo; m eo ill ala
eie e ineacion.
Auxiliary
Failsafe Mode
MENU->SETTINGS-
>PASSWORD->SYSTEM
SET UP->AUX
FAILSAFE
Diabled,
Enabled
Thi eing i he NO/NC conac of
he ailia conac o ha he ill
i on em oe lo.
Silence Time
MENU->SETTINGS-
>PASSWORD->SYSTEM
SET UP->SILENCE
TIME
0 -
99:59:59
Thi conol ho long he be ill
a ilenced afe he ilence bon i
eed.
Pump Run
LED
Brightness
MENU->SETTINGS-
>PASSWORD->SYSTEM
SET UP->PUMP RUN
LED
High, Med,
Lo, Off
Thi conol ho bigh he m n
indicao LED ae.
Stats
Settings
Available Settings
General System Configurations

Name Menu Path Range Description
System
Normal LED
Brightness
MENU->SETTINGS-
>PASSWORD->SYSTEM
SET UP->NORMAL LED
High, Med,
Lo, Off
Thi conol ho bigh he em
nomal indicao LED ae.
Password
Change
MENU->SETTINGS-
>PASSWORD->SYSTEM
SET UP->PASSWORD
0000 -
9999
Thi i he em aod. I can be
changed fom hee.
Thee congaion modif he behaio of he m in he em.
Name Menu Path Range Description
Seal Alarm
Configuration
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->SEAL
ALARM
Alam Onl,
Alam +
So
Thi conol hehe o no eal fail
alam h off hei m.
High Amps
Alarm
Configuration
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->HIGH AMP
ALARM
Alam Onl,
Alam +
So
Thi conol hehe o no high am
alam h off hei m. Noe ha
hi i onl iible if a lea one of he
m ha i cen eno enabled.
Finish Dose
Enable
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->FINISH
DOSE
Diabled,
Enabled
If enabled, m ill nih hei doe
on ccle een if he o oa goe
don. If diabled, he m ill o
nning immediael if he o oa
goe don.
Extra Peak
Doses
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->XTRA PK
DOSES
0-10
Thi i he nmbe of eak doe ha
ae done afe he eak ime oa ha
deaciaed. Thi i ed o make e
enogh ae i med o ding a
eak doing een o een a eea
eak doing een.
General Pump Configurations
Pump One Configurations

Name Menu Path Range Description
Pump One
Enable
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
ENABLE
Diabled,
Enabled
Thi enable o diable m one.
If diabled, he HOA in ill be
neonie and he m ill
nee n on.
Pump One
Auxiliary Cutout
Configuration
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
AUX CUT OUT
Nomall
Oen,
Nomall
Cloed
Thi e he conac e of he
m one ailia c off in.
Pump One
Current Sensor
Enable
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
CURRENT SENSE
Diabled,
Enabled
Thi enable o diable he cen
eno fo m one. Noe ha hi
i oion i onl aailable on
em hied ih a cen
eno.
Pump One Over
Current Level
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
OVER CURRENT
0 - 50 Am
Thi i he oe cen hehold
fo m one. Thi i onl iible if
he cen eno i enabled.
Pump One Under
Current Level
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
LOW AMP LVL
0 - 50 Am
Thi i he nde cen hehold
fo m one. Thi i onl iible if
he cen eno i enabled.
Pump One Flow
Rate
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
FLOW RATE
0 - 999 GPM
Thi i he oae fo m one. I
i ed o calclae oal gallon
med.
Pump One
Exercise Interval
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
EXERCISER INT
Diabled -
45 Da
Thi i he eecie fo m one.
If he m ha been inacie fo
he indicaed nmbe of da, he
em ill bie n he m o
mainain long em m healh.
Pump One
Exercise Time
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
EXERCISER TIME
0:00 - 5:00
Thi i ho long in mine and
econd m one ill n ding
an eecie een.

Name Menu Path Range Description
Pump One
Extended Run
Alarm
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
EXT RUN ALARM
00:00:00 -
99:59:59
Thi i ho long he em ill n
he m befoe iggeing an
eended n ime alam. To diable
hi, e he ime o eo.
Pump One Dose
On Time
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
DOSE ON TIME
0 - 30:59 Thi i he daion of he doe on
oion of he doing ccle.
Pump One Dose
Off Time
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
DOSE OFF TIME
0 - 24:00:00 Thi i he daion of he doe off
oion of he doing ccle.
Pump One Peak
On Time
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
PEAK ON TIME
0 - 30:59
Thi i he daion of he doe on
oion of he eak doing ccle.
Thi ccle i ed ding high ae
alam.
Pump One Peak
Off Time
MENU->SETTINGS-
>PASSWORD->PUMP
SET UP->PUMP 1->P1
PEAK OFF TIME
0 - 24:00:00
Thi i he daion of he doe off
oion of he eak doing ccle.
Thi ccle i ed ding high ae
alam.
Thee congaion change he behaio of he in of he em.
Name Menu Path Range Description
Float
Sequence
Error Enable
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->FLOAT
ERRORS
Diabled,
Enabled
If enabled, he em ill alam if he
oa aciae o of ode. Fo eamle, if
he a oa aciae befoe he o
oa an eo ill be aciaed fo he o
oa.
Seal Sensor
Type
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->SEAL
INPUT TYPE
Nomall
Oen,
Nomall
Cloed
Thi conge he eal fail eno in
e. A nomall oen eno ill alam
hen he in i cloed (eno in ae).
A nomall cloed eno ill igge an
Input Configurations
General Input Configurations

Name Menu Path Range Description
alam hen he eno ie ae oened
(he eal fail ela on he m oened).
Water
Sensor One
Sensitivity
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->WATER
SENSOR ONE
10K - 100K
Thi i he eniii of ae eno (eal
fail eno) one. I eeen he
aoimae eiance a hich he in
ill aciae. 100K i he mo eniie,
and 10K i he lea eniie
All of he eno in of he Fle Conol Panel ae congable o a be of he fncion hon belo. The
in come faco conged o he fncion hon in he anel chemaic, b can be changed b he inalle
in he eld. Thee congaion deemine ha each in doe hen i aciae.
Belo i a bief mma of all aailable in fncion.
Option
Number Name Description
0 Diabled Thi diable he in.
1Lo Alam Thi i a lo leel alam. Will alo ac a a edndan off in.
2 Wide Angle Thi i a ide angle m conol oa. On aciaion, ill a he
m. On deaciaion, ill n off he m.
3So Floa Thi i a o oa.
4 Lead/Sa Thi i a m a oa. Sa he m.
5 Time Enable Thi i he ime enable oa. I ill a a ime doing ccle fo he
lead m.
6 Peak Time Thi i he eak ime a oa. I ill a a eak ime doing
ccle fo he cenl acie m.
7 High Alam Thi i a high ae alam oa. Will a a high ae alam on
aciaion.
8High
Alam/SaThi i a high ae alam oa ha ill alo a he m.
Input Functions

Option
Number Name Description
9 A Alam Thi i a geneal e alam in. Will a he A Alam een on
aciaion.
10 Tandce Thi e he in o fncion a a andce. Noe ha hi i
onl aailable on in 5.
Belo ae he congaion fo he em in. Pleae efeence he aboe able hen eading he ange
colmn.
Name Menu Path Range Description
Input One
Function
MENU->SETTINGS->PASSWORD-
>INPUT SET UP->INPUT ONE 0, 1, 9 Thi conol he fncion
of in one.
Input Two
Function
MENU->SETTINGS->PASSWORD-
>INPUT SET UP->INPUT TWO
0, 2, 3,
5
Thi conol he fncion
of in o.
Input Three
Function
MENU->SETTINGS->PASSWORD-
>INPUT SET UP->INPUT THREE
0, 4, 6,
9
Thi conol he fncion
of in hee.
Input Four
Function
MENU->SETTINGS->PASSWORD-
>INPUT SET UP->INPUT FOUR 0, 7, 8 Thi conol he fncion
of in fo.
Input Five
Function
MENU->SETTINGS->PASSWORD-
>INPUT SET UP->INPUT FIVE
0, 7, 9,
10
Thi conol he fncion
of in e.
Thee ae he congaion fo he andce. Note that these settings will only be accessible if input five is set
to transducer mode.
Name Menu Path Range Description
Transducer
Voltage
Setting
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->24V ENABLE
Diabled,
Enabled
If diabled, he olage fo he
andce ill be 12V. If enabled, he
olage ill be 24V.
Transducer
Response
MENU->SETTINGS-
>PASSWORD->INPUT
"LO/HI:
4/20 mA",
Thi eing conol he eone of
he andce in o highe and
Transducer Configurations
2023 Aldeon Indie. All igh eeed. Poeed b Wiki.j

Name Menu Path Range Description
Type SET UP->TRANSDUCER
CONFIG->RESPONSE
TYPE
"LO/HI:
20/4 mA"
loe eading. Ue hi if he em
i ing an la-onic andce
ih a eeed eone o ae
deh (i.e., a maimm eno o
hen he ae i loe).
Transducer
Display Mode
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->DISPLAY
MODE
Abole,
Relaie
In abole mode, he andce
eading ae hon in fee/inche o
mee. In elaie mode, he eading
ae hon a a ecenage of he
oal ank heigh.
Transducer
Display Units
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->DISPLAY
UNITS
Imeial,
Meic
Thi conol he ni andce
eading ae dilaed in.
Transducer
Rated Depth
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->RATED DEPTH
0 - 99' 11"
(30.45
mee)
Thi i he aed deh of a em
andce. Ued o calclae deh
fom he 4 - 20 mA eading of he
andce.
Transducer
Field
Callibration
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->SET DEPTH
0 - 99' 11"
(30.45
mee)
Thi i ed o calibae he
andce. To calibae, he
andce ino ome knon deh of
ae (o ake i comleel o of he
ae fo a eo eading) and hen e
he coec deh ih hi eing.
Transducer
Tank Height
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->TANK HEIGHT
0 - 99' 11"
(30.45
mee)
Thi i he deh of he ank he
andce i monioing. Thi i ed
o calclae deh ecenage
eading in elaie dila mode.
Transducer
Low Level
Alarm Depth
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->LOW LEVEL
ALARM DEPTH
0 - 99' 11"
(30.45
mee)
Thi i he lo leel alam i oin
of he andce. Se o eo o
diable.
Transducer
Stop Level
MENU->SETTINGS-
>PASSWORD->INPUT
0 - 99' 11"
(30.45
Thi i he o leel i oin of he
andce. Se o eo o diable.

Name Menu Path Range Description
Depth SET UP->TRANSDUCER
CONFIG->STOP LEVEL
DEPTH
mee)
Transducer
Lead/Start
Level Depth
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->LEAD LEVEL
DEPTH
0 - 99' 11"
(30.45
mee)
Thi i he lead leel i oin of he
andce. Se o eo o diable.
Transducer
Timer
Override Level
Depth
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->TIMER
OVERRIDE
0 - 99' 11"
(30.45
mee)
Thi i he leel a hich eak ime
doing ill aciae. Se o eo o
diable.
Transducer
High Alarm
Level Depth
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->HIGH ALARM
LEVEL DEPTH
0 - 99' 11"
(30.45
mee)
Thi i he high alam leel i oin
of he andce. Se o eo o
diable.
Transducer
Aux Alarm
Level Depth
MENU->SETTINGS-
>PASSWORD->INPUT
SET UP->TRANSDUCER
CONFIG->AUX ALARM
LEVEL
0 - 99' 11"
(30.45
mee)
Thi i he leel oe hich he
ailia alam ill aciae. Se o
eo o diable.
Cong code on hi odc can be decoded b come o o oide a na-ho fo ho he em i
conged. The code ielf i a bae 32 nmbe ha m be decoded o ield he em congaion.
Config Code
Other manuals for FLEX
1
This manual suits for next models
1
Table of contents
Other Alderon Industries Control Panel manuals
Popular Control Panel manuals by other brands

LEGRAND
LEGRAND 67206 user guide

weintek
weintek cMT-iPC10 series Installation instruction

KitchenAid
KitchenAid KESS300B reference guide

Intermatic
Intermatic T30000R SERIES Installation, operation & service manual

WhisperPower
WhisperPower WhisperTouch WP-TOUCH 5 User & installation manual

urmet domus
urmet domus 1067/032A installation manual