ALDI FERREX 63349 User manual
User Manual
https://help.tools
Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.
IM Ed3 01/2021
MODEL No.: CHW18W.91, PRODUCT No.: 63349
63349
20V LITHIUMION
PRESSURE SPRAY GUN
Product
Info
MODEL No.: CHW18W.91, PRODUCT No.: 63349
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or after sales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
* Depending on your tari you may be charged
for the connection.
Product
Info
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION.
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. The benets conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty details
AFTER SALES SUPPORT
(toll free)
MODEL No.: CHW18W.91 •01/2021 •63349
MODEL No.: CHW18W.91, PRODUCT No.: 63349
Contents
Pack contents / parts 2
Description of symbols 3
General Safety Warnings 4
Parts List 9
Assembly 10
Attaching extension lance to the power nozzle 10
Attaching the multi nozzle adaptor 10
Selecting an appropriate nozzle 11
Attaching the 6m hose to the hose adapter 11
Attaching your own water hose (optional) 12
Before operation 12
Operation 13
Water Sources & Starting and stopping the Spray Gun 13
Using a garden hose and tap (garden hose adaptor not supplied) 13
Starting and Stopping 14
Watering 14
Cleaning 14
Residual risk 14
Maintenance 15
Battery Maintenance 15
Storage and Transportation 16
Environmental Protection 16
Warranty 16
Warranty 16
What your 5 year warranty means 17
Service Support 17
Accessories and After Sales Parts 18
Troubleshooting 19
Technical Specications 21
MODEL No.: CHW18W.91, PRODUCT No.: 63349
Pack contents / parts
First time users or inexperienced operators pay particular attention to the
operation of the 20V Pressure Spray Gun, including details of starting and
stopping and correct use of the 20V Pressure Spray Gun on pages 13-14, as
well as the maintenance instructions on pages 15.
Intended use of 20V Pressure Spray Gun (battery / charger not included)
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 20V Pressure Spray Gun is used for cleaning and watering / water
spraying in a domestic environment.
The Pressure Spray Gun is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse.
Contents of carton
1 x 20V Spray Gun Skin
1 x Extension Lance
1 x Multi Nozzle Adaptor
1 x Hose Clip
1 x 6m Hose with Floater and Hose Filter
1 x Carry Bag
1 x Instruction manual
1 x Warranty Card & Certicate
2
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use ALDI 20V Xnity Plus
battery packs. Other type of battery packs may burst causing
personal injury and damage. The battery pack must be recharged
only with an ALDI 20V Xnity Plus battery charger.
MODEL No.: CHW18W.91, PRODUCT No.: 63349
Description of symbols
3
The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product or
instructions on its use.
Read instruction manual before operating this machine
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Warning
Conforms to relevant standards for electrical safety and electromagnetic compatibility.
60 Months Warranty
The bag is not recyclable at kerbside, and should be placed in the general waste bin.
The box is recyclable at the kerbside.
The inserts are recyclable at the kerbside.
60
Box
Bag
MODEL No.: CHW18W.91, PRODUCT No.: 63349
General safety warnings
4
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result
in re and/or serious injury.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been given supervision or instruc-
tion concerning use of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they do not play with the
appliance.
- The appliance is only to be used with the power supply unit recommend-
ed with the appliance.
- Liquid or steam must not be directed towards equipment containing
electrical components, such as the interior of ovens.
Safety warnings for battery-operated appliances
1. Non-rechargeable batteries are not to be recharged.
2. Rechargeable batteries are to be removed from the appliance before be-
ing charged.
3. Dierent types of batteries or new and used batteries are not to be
mixed.
4. Batteries are to be inserted with the correct polarity.
5. Exhausted batteries are to be removed from the appliance and safely
disposed of.
6. If the appliance is to be stored unused for a long period, the batteries
should be removed.
MODEL No.: CHW18W.91, PRODUCT No.: 63349 5
7. The supply terminals are not to be short-circuited.
8. Use only compatible ALDI Xnity 20V charger and batteries with this ap-
pliance (not supplied).
Additional safety warnings for pressure spray gun
1. The liquid must not be directed towards equipment containing electrical
components.
2. Remove or disconnect the battery pack after use and before carrying out
user maintenance on the appliance.
3. The appliance shall not be left unattended while it is connected to the
battery pack.
4. The appliance is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
5. Keep the appliance out of reach of children when it is energized.
Safety Warnings for battery pack
a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery packs
haphazardly in a box or drawer where they may short-circuit each
other or be short-circuited by conductive materials. When battery
pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals
together may cause burns or a re.
c) Do not expose battery pack to heat or re. Avoid storage in direct
sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into
contact with the skin or eyes. If contact has been made, wash the af-
fected area with copious amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack has been
swallowed.
Safety Warnings for battery/charger
MODEL No.: CHW18W.91, PRODUCT No.: 63349
6
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean dry cloth if they become
dirty.
i) Battery pack needs to be charged before use. Always refer to this
instruction and use the correct charging procedure.
j) Do not maintain battery pack on charge when not in use.
k) After extended periods of storage, it may be necessary to charge and
discharge the battery pack several times to obtain maximum perfor-
mance.
l) Battery pack gives its best performance when it is operated at nor-
mal room temperature (20 °C ± 5 °C).
m)When disposing of battery packs, keep battery packs of dierent
electrochemical systems separate from each other.
n) Recharge only with the charger specied by POSITEC. Do not use
any charger other than that specically provided for use with the
equipment. A charger that is suitable for one type of battery pack may
create a risk of re when used with another battery pack.
o) Do not use any battery pack which is not designed for use with the
equipment.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future reference.
r) Remove the battery from the equipment when not in use.
s) Dispose of properly.
t) Do not mix cells of dierent manufacture, capacity, size or type
within a device.
u) Do not remove battery pack from its original packaging until re-
quired for use.
v) Observe the plus (+) and minus (–) marks on the battery and ensure
correct use.
w) Use only compatible ALDI Xnity 20V batteries with this appliance
(not supplied).
MODEL No.: CHW18W.91, PRODUCT No.: 63349 7
General Safety Warnings for Battery Charger
WARNING：Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
Additional safety instructions for your Battery Charger
1. Before charging, read the instructions.
2. For charge Li-ion battery pack only.
3. Do not charge a leaking battery.
4. Do not use chargers for works other than those for which they are de-
signed.
5. Before charging, ensure your charger is matching the local AC supply.
6. The charging device must be protected from moisture.
7. Do not use the charging device in the open.
8. Do not short out the contacts of battery or charger.
9. Respect the polarity “+/-“ when charging.
10. Do not open the unit and keep out of the reach of children.
11. Do not charge the batteries of other manufactures or ill-suited models.
12. Ensure that the connection between the battery charger and battery is
correctly positioned and is not obstructed by foreign bodies.
13. Keep battery charger’s slots are free of foreign objects and protect
against dirt and humidity. Store in a dry and frost-free place.
MODEL No.: CHW18W.91, PRODUCT No.: 63349
14. When charging batteries, ensure that the battery charger is in a well-ven-
tilated area and away from inammable materials. Batteries can get hot
during charging. Do not overcharge any batteries. Ensure that batteries
and chargers are not left unsupervised during charging.
15. Do not recharge non-rechargeable batteries, as they can overheat and
break.
16. Longer life and better performance can be obtained if the battery pack
is charged when the air temperature is between 18oC and 24oC. Do not
charge the battery pack in air temperatures below 0oC, or above 40oC.
This is important as it can prevent serious damage to the battery pack.
17. Use only compatible ALDI Xnity 20V chargers with this appliance (not
supplied).
Important information – Product care
NOTE:
This
Spray gun
uses Lithium Ion Battery Cells. Care MUST be taken
to ensure both the safety and life of the pack is maintained. Ensure you
have read all of the safety notes in the previous pages before using the
Spray gun
.
Treat the battery pack with care and within the guidelines of this manual.
If the battery pack does become immersed in water or any uids, or is
subject to a severe drop or it does not operate within the guidelines of this
manual immediately STOP using the battery pack and have it checked.
Use only ALDI Xnity 20V Lithium-Ion battery/s (not supplied) and Xnity
Charger (not supplied) with this
spray gun
. Do not use other any other bat-
teries of chargers with this
spray gun
.
8
AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
MODEL No.: CHW18W.91 • 01/2021 • 63349
9
1. Lock-o switch
2. On/o switch lever
3. Hose adapter
4. 20V Battery pack (not included;
shown only for illustrative and
instructional purposes only)
5. Battery pack release button
6. Power nozzle
7. Extension lance
8. Nozzle adapter
9. Multi Nozzle Adaptor
(0°/15°/25°/40°/shower)
10. Hose clip
11. Hose (6m)
12. Floater
13. Hose lter
14. Hose connector
15. Carry bag
16. Filter screen (Fig E2)
17. 20V Charger (not included;
shown only for illustrative and
instructional purposes only)
Parts List
9
12 13
14
7
4
17
9
10
11
8
15
6
3
2
1
54
20V Pressure Spray Gun
AFTER SALES SUPPORT
MODEL: №. CHW18W.91 • 01/2021 • 63349 (toll free)
10
Attaching the multi nozzle adaptor (9) (Fig B1, B2)
Pull back the collar at the end of the lance (7), align and insert the multi nozzle
adaptor (9) into the lance (7). Release the collar to lock the nozzle adaptor (9) in
place.
After attaching, gently pull the multi nozzle adaptor (9) to make sure it is locked
securely.
Assembly
WARNING: Remove the battery pack before assembling the
spray gun!
Attaching extension lance (7) to the power nozzle (6) (Fig A)
When attaching, align the two projections on the extension lance (7) with
the grooves of the power nozzle (6), then push the nozzle in and rotate in a
clockwise direction to engage the lance securely.
B2
A
1
2
1
B1 2
1
AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
MODEL No.: CHW18W.91 • 01/2021 • 63349
11
D1 D2
Selecting an appropriate nozzle (Fig C1-C6)
Rotate the multi nozzle adaptor (9) collar in clockwise or anti-clockwise
direction to select an appropriate nozzle pattern according to your requirement.
Spray patterns 0°, 15°, 25° and 40° are applicable for cleaning. The shower
mode (Fig. C6) is most suitable for watering.
Attaching the 6m hose (11) to the hose adapter (3) (Fig D1, D2)
Directly align and insert the 6m hose (11) into the hose adapter (3). After
the 6m hose (11) is attached, check the connection by gently pulling the 6m
hose (11). It should not be able to be removed or pulled o from the hose
adapter (3).
C1 C2 C3
C4 C5 C6
20V Pressure Spray Gun
AFTER SALES SUPPORT
MODEL: №. CHW18W.91 • 01/2021 • 63349 (toll free)
12
Attaching your own water hose (optional)
Firstly, remove the hose adapter (3) (Fig E1 E2), then attach your home
garden hose with suitable connectors (Fig E3).
WARNING! It is not recommended to connect the 6m hose (11)
directly on your garden hose or your home tap.
NOTE: Except for the 6m hose (11) supplied, you can also connect the power
nozzle to your own water hose with suitable connectors.
NOTE: Check whether the hose lter (13) screen is missing before
retightening the hose adapter (3) (Fig E2). When retightening the hose
adapter (3), tighten securely (using a 17mm spanner, not supplied).
Otherwise, it may not draw any water for proper operation.
NOTE: The tool is compatible with ALDI 20V Xnity batteries and chargers.
Xnity Battery pack and charger is not included with this product; it is shown
only for illustrative and instructional purposes only.
Installing and removing the battery pack (Fig. F1, F2)
1. To attach the battery align the grooved guide rails of the battery pack (4)
with the raised guide rails on the bottom of the spray gun. A click will be
heard when the battery pack (4) is engaged correctly (Fig F1).
2. To remove the battery pack (4), press down the battery release button
and pull the battery pack (4) away from the spray gun (Fig F2).
Charging the battery pack (Fig. F3)
1. Charging the battery pack (4) (Fig F3).
E2 E3
Suitable
Connector
16
Before operation
E1
AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
MODEL No.: CHW18W.91 • 01/2021 • 63349
13
F2 F3
REMOVE
INSTALL
Water Sources & Starting and stopping the
Spray Gun (Fig. G1)
1. When you are close to the water source, like a
pool or pond, connect the 6m hose (11) to the
hose adapter (3) and put the end with the hose
lter (13) into the nearest water source.
2. If you are too far from the water source, collect
water in a bucket or convenient container
instead. Then connect the 6m hose (11) to the
hose adapter (3) and put the end with the hose
lter (13) into the container.
3. Hold the soft handle of the spray gun with
your hand rmly. Adjust the height of the
spray gun to make sure the height distance
between the hose adapter (3) and the water
source is less than 1.5m. A distance greater
than 1.5m may cause the spray gun to not
draw any water, or there may not be sucient
pressure. Make sure the hose is not knotted or
kinked during the operation (Fig G2).
Using a garden hose and tap (garden hose adaptor not supplied)
1. Remove the hose adapter (3) (Fig. E1 E2) (refer to instructions on page 12).
2. Attach your home garden hose with suitable connectors.
3. Hold the soft handle of the spray gun with your hand rmly.
4. Turn the tap on.
Operation
2
1
F1
Hose adapter
Water source
Max1.5m
20V Pressure Spray Gun
AFTER SALES SUPPORT
MODEL: №. CHW18W.91 • 01/2021 • 63349 (toll free)
14
Starting and Stopping
1. Before rst use: If using the 6m hose and alternate water source, remove
any air trapped in the 6m hose (11) by placing the power nozzle (6)
below waist level and attaching the extension lance (7).
2. Then start the spray gun by pressing the lock-o switch (1) and the on/
o switch lever (2). Depending on the water source, it may take up to 30
seconds for water to travel along the 6m hose (11) and begin spraying.
To stop the spray gun, release the on/o switch lever (2).
Watering (Fig H)
NOTE: It is recommended to use the shower mode for watering.
Cleaning (Fig I, J)
WARNING: Do not connect the spray gun to water supplies that
are dirty, rusty, muddy, or corrosive. (Including window
cleaning liquids, plant foods, or fertilizers etc.)
NOTE: Not recommended for use with salt water; immediately rinse with
fresh water for proper maintenance.
Residual risk
Even if you use the 20V Spray Gun properly per the instructions provided
and following all safety notes, there are always residual risks. The following
risk may occur:
- Accidental Starting: Always remove the battery pack from the spray gun
before carrying out any adjustment, servicing or maintenance. When
not in use, store the battery in a safe, dry, clean environment.
- Risk of uid injection: Do not direct the output of the spray gun at any
person, the operator, or any animals. Never place hands in front of
H I J
AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
MODEL No.: CHW18W.91 • 01/2021 • 63349
15
Maintenance
nozzle, direct spray away from self or others, and always operate in an
area clear of all persons, pets and obstacles. Do not operate the product
when fatigued or under the inuence of alcohol or drugs, stay alert at all
times.
Reduce residual risks by using the 20VSpray Gun with care and following all
safety notes as well as other instructions.
WARNING: Always ensure that the product is switched o and
the battery pack (4) is removed before making any adjustment.
Cleaning
Clean the case only with a damp cloth. DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use a clean cloth to
remove dirt, dust, oil, grease etc, then dry well.
Battery Maintenance
To maintain battery capacity, always refer to the specic instructions in the
supplied manual included with the purchase of ALDI Xnity Batteries. It is
recommended to recharge your battery every two months. Store only fully
charged batteries. They should therefore be recharged from time to time.
The place of storage must be dry.
CAUTION! Electrical and battery operated units that no longer
work should not be disposed of in the household waste! They
are to be collected separately, in accordance with your local waste
disposal regulations.
ATTENTION! Batteries must be removed from battery powered
tools and disposed of separately in accordance with relevant
waste battery regulations.
Batteries must never be disposed of with domestic waste!
Please discard power tools no longer usable at a local collection point.
Collection and disposal of packaging materials separately by types
complying with local rules and regulations. For details, please contact your
local council.
20V Pressure Spray Gun
AFTER SALES SUPPORT
MODEL: №. CHW18W.91 • 01/2021 • 63349 (toll free)
16
Storage and Transportation
Recycle unwanted materials instead of disposing of them as waste. All
tools, hoses and packaging should be sorted, taken to the local recycling
centre and disposed of in an environmentally safe way.
Warranty
Environmental Protection
Warranty
Your new FERREX® 20V Lithium-Ion Pressure Spray Gun will more than
satisfy your expectations.
It has been manufactured under stringent FERREX® Quality Standards to
meet superior performance criteria.
You will nd your new 20V Lithium-Ion Pressure Spray Gun easy and safe to
operate, and, with proper care, it will give you many years of dependable
service.
CAUTION. Carefully read through this entire instruction manual before using
your new FERREX® 20V Lithium-Ion Pressure Spray Gun. Take special care to
heed the Cautions and Warnings.
Your FERREX® 20V Lithium-Ion Pressure Spray Gun has many features that
will make your job faster and easier. Safety, performance, and dependability
Before Storage, completely drain all the water from the machine and hose.
Put the machine and accessories into the carry bag.
Store in a secure and dry place out of the reach of children. Do not place other
objects on the product.
Store the machine and the accessories in a frost free place.
AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
MODEL No.: CHW18W.91 • 01/2021 • 63349
17
have been given top priority in the development of this 20V Lithium-Ion
Pressure Spray Gun, making it easy to maintain and operate.
Use only FERREX® replacement parts for your product. Non-conforming
parts or modications made to parts will void your warranty.
What your 5 year warranty means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of
the rst 5 years after the date of purchase, we will remedy the problem as
quickly as possible once it has been brought to our attention. In the unlikely
event of such an occurrence, or if you require any information about the
product please contact us via our after sales support services, details of
which can be found in this manual and on the product itself.
After Sales Support TEL: 1300 889 028
Service Support
If you have any issues with the operation of your product, please call our
Customer Service on 1300 889 028 for advice, or email us at
info.aldi@positecgroup.com
Table of contents
Other ALDI Paint Sprayer manuals
