ALFAtron ALF-MMX6464A-N User manual

www.alfatronelectronics.com
ALFATRON ELECTRONICS GmbH GERMANY
ALF-MMX6464A-N
Modular Matrix Switcher 64x64
All Rights Reserved
Version: ALF-MMX6464A-N_2022V3.2

ALF-MMX6464A-N
Preface
Read this user manual carefully before using the product. Pictures are shown in this
manual for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version is updated as of
March, 2022. In the constant effort to improve the product, we reserve the right to
make functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
FCC Statement
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Do not dispose of this product with the normal household waste at the end of its life
cycle. Return it to a collection point for the recycling of electrical and electronic devices.
This is indicated by the symbol on the product, user manual or packaging. The
materials are reusable according to their markings. By reusing, recycling or other
forms of utilisation of old devices you make an important contribution to the protection
of our environment. Please contact your local authorities for details about collection
points.

ALF-MMX6464A-N
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration, or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near liquid.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or forcefully pull the ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

ALF-MMX6464A-N
Table of Contents
1. Product Introduction....................................................................................................1
1.1. Features ...........................................................................................................1
1.2. Signal Card.......................................................................................................2
1.3. Package List .....................................................................................................3
2. Panel Description........................................................................................................4
2.1. Matrix Front Panel ............................................................................................4
2.2. Matrix Rear Panel.............................................................................................5
2.3. Signal Card.......................................................................................................6
2.3.1. 4I-VA .......................................................................................................6
2.3.6. 4I-UH & 4O-UH.......................................................................................7
2.3.7. 4I-UHS & 4O-UHS..................................................................................9
2.3.12. 4I-BT & 4O-BT....................................................................................10
3. System Connection...................................................................................................12
3.1. Usage Precaution ...........................................................................................12
3.2. Connection Diagram.......................................................................................12
4. Button control............................................................................................................13
5. IR Remote Control ....................................................................................................14
6. RS232 Control ..........................................................................................................15
6.1. RS232 Communication Port ...........................................................................15
6.2. RS232 Control Software.................................................................................15
6.3. RS232 Communication Command .................................................................17
6.3.1. System Control Command....................................................................18
6.3.2. Signal Switching Command..................................................................18
6.3.3. Preset Command..................................................................................19
6.3.4. EDID Management Command..............................................................19
6.3.5. 4I-VA Input Card Command..................................................................20
6.3.6. 4I-UH Input Card Command.................................................................21
6.3.7. 4I-UHS Input Card Command...............................................................21
6.3.8. 4O-UHS Output Card Command..........................................................22
6.3.9. 4I-BT Input Card Command..................................................................23

ALF-MMX6464A-N
7. TCP/IP Control (Optional) .........................................................................................26
7.1. Control Mode ..................................................................................................26
7.2. TCP/IP Communication Software ...................................................................28
7.3. TCP/IP Configuration......................................................................................29
8. Specification .............................................................................................................30
8.1. Main Unit ........................................................................................................30
8.2. Signal Card.....................................................................................................30
8.2.1. 4I-VA .....................................................................................................30
8.2.2. 4I-UH & 4O-UH.....................................................................................31
8.2.3. 4I-UHS & 4O-UHS................................................................................31
8.2.4. 4I-BT & 4O-BT......................................................................................32
9. Troubleshooting & Maintenance ...............................................................................33
10. After-Sales Service .................................................................................................35
11. Warranty .................................................................................................................36

ALF-MMX6464A-N
1
1. Product Introduction
The Alfatron ALF-MMX6464 is a high-performance video and audio modular matrix
switcher supporting maximum 64 input signal sources and 64 output display
synchronously. It supports different video signals with cross switching. Every video or
audio signal is transmitted and switched independently to decrease signal attenuation.
The ALF-MMX6464 matrix supports various changeable cards including HDMI, VGA,
and HDBaseT. Users can choose to insert different signal cards for different
applications.
The matrix has a power failure memory function and audio can break away from or
follow the video switching. The matrix has an RS232 port for serial control and an
optional IP port for TCP/IP control, which can be easily controlled via third-party
devices.
With its flexible design, the ALF-MMX3232 matrix can be used for an array of different
projects and tend to be an all-in-one solution. It is the combination solution for
multimedia conference rooms, control rooms, broadcasting rooms, shopping center,
etc. It will handle all the audiovisual management, including the switching, driving,
scaling, etc.
1.1. Features
Modular chassis with configurable I/O slots, ranging from 4x4 to 32x32.
Various I/O cards, includes HDMI, HDBaseT, and VGA cards (Compatible with
YUV, YC & CVBC.) to configure any matrix.
Truly cross-point switching, any input to any output, regardless signal format.
Supports HDMI1.4 and 1080P 3D.
Integrated HDBaseT technology.
Controllable via front panel buttons, RS232, and optional TCP/IP, also compatible
with third party control.
HDCP compliant.
LCD display.

ALF-MMX6464A-N
2
1.2. Signal Card
The ALF-MMX6464 matrix supports multiple signal cards as listed below:
Signal Model Description
VGA 4I-VA 1080P seamless VGA input card with 4 VGA and 4
external L+R audio ports.
HDMI
4I-UH 4K HDMI input card with 4 HDMI, and 4 external L+R
audio ports.
4O-UH 4K HDMI output card with 4 HDMI and 4 external L+R
audio ports.
4I-UHS 4K seamless HDMI input card with 4 HDMI and 4 external
stereo audio ports.
4O-UHS 4K seamless HDMI output card with 4 HDMI and 4
external stereo audio ports.
HDBaseT
4I-BT 4K HDBaseT input card with 4 HDBT, 4 RS232 and 4
external stereo audio ports.
4O-BT 4K HDBaseT output card with 4 HDBT, 4 RS232 and 4
external stereo audio ports.

ALF-MMX6464A-N
3
1.3. Package List
1x Alfatron ALF-MMX6464 Modular Matrix Switcher
1x IR Remote
1x RS232 Cable
4x Plastic Cushions
1x Power Cord
1 x User Manual
Note:Please contact your distributor immediately should any damage or defect in the
components be found.

ALF-MMX6464A-N
4
2. Panel Description
2.1. Matrix Front Panel
No.
Name
Description
①
IR
Built-in IR sensor to receive IR signal sent from IR remote.
②
Power LED
The LED illuminates red when power is applied.
③
LCD Screen
Shows real-time operation status.
④INPUTS Back-lit buttons for input selection, ranges from 0~ 9, 64
selectable channels in total.
⑤OUTPUTS
Back-lit buttons for output selection, ranges from 0 ~ 9, 64
selectable channels in total.
⑥MENU
AV:
Switch video and audio signal synchronously.
‚:Division button, to divide the output channels when
switching to more than one channel.
ENTER: Confirm switching operation. Operation will not be
executed by the matrix without confirmation.
ALL: To transfer an input channel to all output channels.
THROUGH: To transfer the signals directly to the
corresponding output channels.
UNDO: Undo button, to resume to the status before the
command just performed.

: Backspace button, to backspace the last button pressed.
INPUTS
OUTPUTS
MENU
AV
Enter
1 2 34567890
1 2 34567890
IR
SYSTEM MONITOR
,
Undo
All Through
1346
25

ALF-MMX6464A-N
5
2.2. Matrix Rear Panel
No.
Name
Description
①
INPUTS
Signal card slots to insert required input cards.
②
OUTPUTS
Signal card slots to insert required output cards.
③Power Switch
Switch between AC110V and AC230V to access different
power.
④
TCP/IP
(Optional) Used for TCP/IP control port.
⑤
IR
IR input to connect IR receiver.
⑥
RS232
Serial control port, connect with RS232 port of control device.
⑦Power Ports
Connect with household alternating current power, including
one redundant power.
Note: There are only sixteen input and sixteen output slots for the matrix, which
enables only sixteen input cards and sixteen output cards to be installed. The input /
output cards can be changed based on your requirements and supports hot plug and
play.
2
1
3
4
5
6
7

ALF-MMX6464A-N
6
2.3. Signal Card
The matrix supports expansion through various changeable input/ output cards of
different signals including DVI, HDMI, VGA, twisted pair, SDI etc. Here is a brief
introduction to the changeable cards.
2.3.1. 4I-VA
1080P seamless VGA input card with 4 VGA and 4 external L+R audio ports.
4I-VA
Supports seamless switching, it can be used in combination with other seamless
output signal card.
Supports video upscaling, converting input video to 1080P or 1920x1200P.
Supports input resolution selection.
Manually select VGA (RGBHV), YPbPr, S-VIDEO or C-VIDEO signal format.
Compatible with HDMI and DVI signal input.
Supports YCBCR or RGB chrominance space.
Supports VGA input signal auto correction.
Supports 4 external L+R audio inputs and audio channel control.
Pin layout of female VGA connector:
Pin
Signal
Pin
Signal
1
RED
9
KEY/PWR
2
GREEN
10
GND
3
BLUE
11
ID0/RES
4
ID2/RES
12
ID1/SDA
5
GND
13
HSync
6
RED_RTN
14
VSync
7
GREEN_RTN
15
ID3/SCL
8
BLUE_RTN

ALF-MMX6464A-N
7
When connecting to YPbPr or C-VIDEO signal, insert converting cables according to
specific pin definitions (see the figures below):
VGA- YPbPr:
Pin
Signal
Pin
Signal
1
RED
6
GND
2
GREEN
7
GND
3
BLUE
8
GND
Other pins are not used.
VGA- C-VIDEO:
Pin
Signal
Pin
Signal
1
RED
6
GND
7
GND
8
GND
Other pins are not used.
2.3.2. 4I-UH & 4O-UH
4K HDMI input card with 4 HDMI, and 4 external L+R audio ports.
4I-UH
Supports HDMI 1.4 and HDCP 1.4.
Compatible with DVI signal.
Input resolution is up to 4Kx2K, and supports 1080P 3D.
Synchronously switch audio and video.

ALF-MMX6464A-N
8
Supports 4 external L+R audio inputs and audio channel control.
Note: When the 4I-UH input card is used with the 1080P output card, the video
resolution must be set to 1080P to ensure reliable output.
4K HDMI output card with 4 HDMI, and 4 external L+R audio ports.
4O-UH
Supports HDMI 1.4 and HDCP 1.4.
Compatible with DVI signal.
Output resolution is up to 4Kx2K, and supports 1080P 3D.
Synchronously switch audio and video.
Supports 4 external L+R audio outputs.

ALF-MMX6464A-N
9
2.3.3. 4I-UHS & 4O-UHS
4K seamless HDMI input card with 4 HDMI and 4 external stereo audio ports.
4I-UHS
Supports HDMI 1.4 and HDCP 2.2.
Compatible with DVI-D signal.
Resolution is up to 4096*2160@60Hz 4:2:2.
Input signal card has character overlay function, and character can be changed
relative attribute via commands.
Supports audio embedded function.
Input card supports OSD menu function.
It can be used with 1080P seamless signal card together.
4K seamless HDMI output card with 4 HDMI and 4 external stereo audio ports.
4O-UHS
Supports HDMI 1.4 and HDCP 2.2.
Compatible with DVI-D signal.
Resolution is up to 4096*2160@60Hz 4:2:2.
Supports various output resolution: 1024x768@60Hz, 1360x768@60Hz,
1280x720@60Hz, 1920x1080@30Hz, 1920x1080@60Hz, 3840x2160@30Hz,
4096x2160@30Hz.
Supports audio de-embedded function.
Output card supports simple view splicing function.
It can be used with 1080P seamless signal card together.

ALF-MMX6464A-N
10
2.3.4. 4I-BT & 4O-BT
4K HDBaseT input card with 4 HDBT, 4 RS232 and 4 external stereo audio ports.
4I-BT
Supports HDBT 1.0, HDMI 1.4 and HDCP 1.4.
Input resolution is up to 4Kx2K, and supports 1080P 3D.
It is used with HDBaseT transmitter to extend video signal, and the transmission
distance can up to 70 meters at 1080P, or 40 meters at 4Kx2K.
Features 4 RS232 ports for two-way RS232 pass-through.
The RS232 baud rate supports 2400, 4800, 9600, 19200, 38400, 57600,115200.
Supports 4 external stereo audio inputs and audio channel control.
Note: When the 4I-BT input card is used with the 1080P output card, the video
resolution must be set to 1080P to ensure reliable output.
4K HDBaseT output card with 4 HDBT, 4 RS232 and 4 external stereo audio ports.
4O-BT
Supports HDBT 1.0 and HDCP 1.4.
Output resolution is up to 4Kx2K, and supports 1080P 3D.
It is used with HDBaseT receiver to extend video signal, and the transmission
distance can up to 70 meters at 1080P, or 40 meters at 4Kx2K.
Features 4 RS232 ports for two-way RS232 pass-through.
The RS232 baud rate supports 2400, 4800, 9600, 19200, 38400, 57600,115200.
Supports 4 external stereo audio outputs and audio channel control.

ALF-MMX6464A-N
11
How the indicators work:
Color
Definition
Status
Yellow
Power LED
The LED illuminates yellow when power is applied.
Green Link LED
The LED illuminates green when the port is
successfully connected to other device by CATx
cable.
Pin layout of the HDBT connector:
Pin
Color
1
orange white
2
orange
3
green white
4
blue
5
blue white
6
green
7
brown white
8
brown
1st Group
4--5
2nd Group
1--2
3rd Group
3--6
4th Group
7--8
Note: Cable connectors MUST be metal one, and the shielded layer of cable MUST
be connected to the connector’s metal shell, to well share the grounding.

ALF-MMX6464A-N
12
3. System Connection
3.1. Usage Precaution
Ensure all components and accessories included before installation.
System should be installed in a clean environment with adequate temperature and
humidity.
All of the power switches, plugs, sockets, and power cords should be insulated and
safe.
All devices should be connected before power on.
3.2. Connection Diagram

ALF-MMX6464A-N
13
4.
5. Button control
The matrix can be controlled via the front panel buttons. To switch AV signal, please
operate the buttons using the following order:
Order: “Input Channel” + “AV” +“Output Channel” + “Enter”
Note:
Input Channel: Fill with the number of the input channel to be controlled.
Output Channel: Fill with the number of output channels to be controlled. Press “All”
to select all the outputs.
Use “,” button to separate multiple I/O channels, and press “ENTER” button to
confirm the operation.
The input/output channels on the rear panel are counted from left to right, top to
bottom.
The input delay time between two numbers of every input & output channel must
be less than 5 seconds; if not, the operation will be cancelled.
Example: To transfer input 1 to output 11, press input “1”, output “1” “1” and
“Enter”.
To transfer signals from input 1 to all output channels, press buttons in
this order: “1”, “All”.
Other Functional Buttons:
Buttons
Description
Operation
UNDO Return to the previous
status
Status 1: Input 6 -> output 6
Press input “6” + “AV” + output 4 to change
the connection. Press “Undo” to return to
Status 1.

Backspace the last
operation
If you press buttons “1”, “AV”, “2”, “

” in
order, then “2” will be canceled.
THROUGH
Get straight I/O
connection, e.g., input
1-> output 1, input 2->
output 2.
Format: “Input Channel” + “Through”
If you press buttons “ALL”, “THROUGH” in
order, then the result will be like input 1
output 1, input 2 output 2, input 3 output
3 … input 16 output 16.

ALF-MMX6464A-N
14
6. IR Remote Control
The ALF-MMX6464 matrix can be controlled via the remote. As the function buttons on
the IR remote are the same with the ones on the front panel, the IR remote shares the
same operations and commands with the control panel.
Press the buttons under below format:
“Input Channel” + “Switch Mode” + “Output Channel”
Input channel buttons,
including 1~10+
Menu buttons, including
switching buttons and
function buttons
Output channel buttons,
including 1~10+
Input channel buttons,
including 1~10+
Menu buttons, buttons
VIDEO and AUDIO are
not available.
Output channel buttons,
including 1~10+

ALF-MMX6464A-N
15
7. RS232 Control
7.1. RS232 Communication Port
Apart the front control panel and IR remote, the ALF-MMX6464 matrix can be
controlled by far-end control system or through the Ethernet control via the RS-232
communication port.
This RS-232 communication port is a female 9- D connector. The definition of its pin
layout is shown in the table below.
No.
Pin
Function
1
N/u
Unused
2
Tx
Transmit
3
Rx
Receive
4
N/u
Unused
5
Gnd
Ground
6
N/u
Unused
7
N/u
Unused
8
N/u
Unused
9
N/u
Unused
7.2. RS232 Control Software
When the ALF-MMX6464 matrix connects to the RS232 port of a computer with
control software, users can control it via that computer. To control the switcher, users
need to use an RS232 control software.
Installation: Copy the control software file to the computer connected to the
Transmitter.
Uninstallation: Delete all the control software files in corresponding file path.
Basic Setting
Connect the matrix to all input devices and output devices required, then connect it to
a PC which has the RS232 control software installed. Double-click the software icon to
run this software. Please refer the software CommWatch.exe as example. The icon is
shown below: