Allen-Bradley Rockwell Automation PowerFlex 700 Series User manual

PowerFlex 700 Drives to PowerFlex 750-Series Drives
Migration Guide
Original Instructions

Important User Information
Read this document and the documents listed in the additional resources section about installation, configuration, and
operation of this equipment before you install, configure, operate, or maintain this product. Users are required to
familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,
and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are
required to be carried out by suitably trained personnel in accordance with applicable code of practice.
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may
be impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from
the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or
liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or
software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,
Inc., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
Labels may also be on or inside the equipment to provide specific precautions.
WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous
environment, which may lead to personal injury or death, property damage, or economic loss.
ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property
damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.
IMPORTANT Identifies information that is critical for successful application and understanding of the product.
SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous
voltage may be present.
BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may
reach dangerous temperatures.
ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to
potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL
Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 3
Table of Contents
Preface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 1
Drive Selection Considerations Available Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Factory Installed Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hardware Drive Enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications and Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PowerFlex Drive Conversion Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Power Terminal Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
PowerFlex 700 Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
PowerFlex 750-Series Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Control Terminal Comparison. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PowerFlex 700 Drives I/O Cassette Terminals . . . . . . . . . . . . . . . 45
PowerFlex 753 Drives Main Control Board I/O . . . . . . . . . . . . . 48
PowerFlex 755 Drives Main Control Board I/O . . . . . . . . . . . . . 49
PowerFlex 750-Series Option Module. . . . . . . . . . . . . . . . . . . . . . . 50
PowerFlex Drive
Catalog Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chapter 2
Analog Speed Follower and
Preset Speed
Drive Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Analog Speed Follower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Three-wire Control with Analog Speed Reference. . . . . . . . . . . . 55
Two-wire Control with Analog Input Speed Reference . . . . . . . 59
Two-wire Control with Preset Speeds . . . . . . . . . . . . . . . . . . . . . . . 62
Preset Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Chapter 3
Network Communications Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
20-COMM Carrier Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
PowerFlex 750-Series Communication Options. . . . . . . . . . . . . . 69
PowerFlex 755 Embedded EtherNet/IP Adapter. . . . . . . . . . . . . 69
Software Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Velocity Reference/Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Using the I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
16 Bit-based Processors (PLC-5). . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

4Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Table of Contents
Notes:

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 5
Preface
Overview
The purpose of this publication is to assist in migrating a PowerFlex® 700 drive to
a PowerFlex 750-Series drive. This publication contains these chapters:
•Chapter 1: Drive Selection Considerations
Compares the features of the PowerFlex 750-Series drives to the PowerFlex
700 drive.
•Chapter 2: Analog Speed Follower and Preset Speed
The control wiring and parameters of the PowerFlex 700 drive analog
speed follower and preset speed are compared to the PowerFlex 753 drive
(with main control board I/O) and the PowerFlex 755 drive (with optional
I/O module).
•Chapter 3: Network Communications
Provides information on the PowerFlex 700 20-COMM network options
that can be migrated to the PowerFlex 750-Series drives and the dedicated
communications options available in the PowerFlex 750-Series drives.
Summary of Changes
Topic Page
Added PowerFlex documents to the Additional Resources table. 6
Updated drive comparison tables 8…12
Added 208V, 240V, 400V, 600V, and 690V conversion guide tables 13…18
Added PowerFlex 755 drive frame 8 and 9 Power Wiring Options table 44
Updated 20-Comm carrier adapter choices 68
Added new PowerFlex 750-Series communications options table 69
Updated software versions table 69

6Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Preface
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/global/literature-library/overview.page.
Resource Description
PowerFlex 700 AC Drives Vector Control Firmware 4.001 and Up,
Frames 0…10 User Manual, publication 20B-UM002
Provides information on how to install, start-up and troubleshoot the PowerFlex 700
adjustable frequency AC drives with vector control.
PowerFlex 700 Adjustable Frequency AC Drive - Frames 7...10
Installation Instructions, publication 20B-IN014
Explains the five basic steps needed to install and perform a basic start-up of the
PowerFlex 700 AC drive.
PowerFlex 700 Adjustable Frequency AC Drive - Frames 0...6
Installation Instructions, publication 20B-IN019
Explains the five basic steps needed to install and perform a basic start-up of the
PowerFlex 700 (Series A or B) AC drive.
PowerFlex 700 Adjustable Frequency AC Drive,
publication 20B-TD001
Provides an overview of the PowerFlex 700 AC drive.
PowerFlex 750-Series AC Drives Technical Data, publication
750-TD001
Provides technical data regarding the PowerFlex 750-Series adjustable frequency AC
drives for a variety of industrial applications.
PowerFlex 750-Series AC Drives Installation Instructions,
publication 750-IN001
Provides information on how to install, start-up, and troubleshoot PowerFlex
750-Series adjustable frequency AC drives.
PowerFlex 750-Series AC Drives Programming Manual,
publication 750-PM001
Provides information on how to program the PowerFlex 750-Series adjustable
frequency AC drives.
PowerFlex 755 Drive Embedded EtherNet/IP Adapter User
Manual, publication 750COM-UM001
Provides network communication information for the EtherNet/IP™ adapter embedded
on the main control board in PowerFlex 755 drives.
PowerFlex 750-Series Drive DeviceNet Option Module User
Manual, publication 750COM-UM002
Provides network communication information for the optional 20-750-DNET module
that can be installed in a PowerFlex 750-Series drive.
20-Comm-E EtherNet/IP Adapter User Manual, publication
20COMM-UM010
Provides network communication information for the optional 20-Comm-E EtherNet/IP
adapter that can be installed in a PowerFlex 750-Series drive.
Product Certifications website, rok.auto/certifications Provides declarations of conformity, certificates, and other certification details.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing an Allen-Bradley industrial automation
system.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 7
Chapter 1
Drive Selection Considerations
The differences between a PowerFlex 753 drive and PowerFlex 755 drive must be
considered when selecting a PowerFlex 750-Series drive as a replacement for a
PowerFlex 700 drive application.
Available Slots
The PowerFlex 750-Series drives are designed with a slot-based architecture
allowing customization with available option cards. The PowerFlex 753 drive is
equipped with three slots and the PowerFlex 755 drive has five slots.
Factory Installed Options
No options can be factory installed on the PowerFlex 750-Series drives. All
optional accessories are customer installed.
Hardware Drive Enable
Digital input (DI) 6 on the PowerFlex 700 drive can be programmed for any
available digital input functions including Enable. The PowerFlex 700VC has a
hardware enable jumper on the main control board that can be removed to force
DI 6 to act as hardware enabled with no software interpretation.
Digital Input 0 on the PowerFlex 750-Series drives can be programmed for any
available digital input functions including DI Enable. A hardware enable jumper
on the main control board can be removed to force DI 0 to act as hardware enabled
with no software interpretation.
The following figure shows the hardware enable jumper locations.
Figure 1 - Hardware Enable Jumper Locations on PowerFlex 750-Series Drives
PowerFlex 753 Drives (All Frames) PowerFlex 755 Drives (Frames 2…7) PowerFlex 755 Drive (Frame 8)

8Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Specifications and
Features
When selecting a PowerFlex 750-Series drive to replace a PowerFlex 700 drive,
you must consider the features and differences between the
PowerFlex 753 and PowerFlex 755 drive. The specifications and features listed are
those available for the products at the time that this migration guide was
published.
Table 1 - PowerFlex Drive Comparisons
PowerFlex Drive
700 Standard Cassette 700 Vector Cassette
Series B
753 755
Input Power
Ratings:
200…240V 0.37…45 kW
(0.5…75 Hp)
0.37…66 kW
(0.5…100 Hp)
0.37…132 kW
(0.5…200 Hp)
0.37…132 kW
(0.5…200 Hp)
400…480V 0.37…132 kW
(0.5…200 Hp)
0.37…500 kW
(0.5…700 Hp)
0.75…270 kW
(1…400 Hp)
0.75…1250 kW
(1…1750 Hp)
500…600V 0.37…132 kW
(0.5…150 Hp)
0.37…132 kW
(0.5…150 Hp)
1…300 Hp 1…1400 Hp
690V 45…135 kW
(60…150 Hp)
45…132 kW
(60…150 Hp)
7.5…250 kW 7.5…1400 kW
Single phase Yes, 50% derate Yes, 50% derate Yes, 50% derate Yes, 50% derate
Input inductor DC bus DC bus DC bus DC bus
Logic ride-through 0.5 s minimum,
2 s typical
0.5 s minimum,
2 s typical
0.5 s minimum,
2 s typical
0.5 s minimum,
2 s typical
Power ride-through 15 ms 15 ms 15 ms 15 ms
Transient protection MOV MOV MOV MOV
DC input terminals Yes Yes Frames 2…4 standard,
Frames 5…7 optional
Frames 2…4 standard,
Frames 5…8 optional
Output Power
Carrier frequency All frames: 2…10 kHz All frames: 2…10 kHz Frames 2…6: 2, 4, 8, and
12 kHz
Frame 7: 2, 4, and 8 kHz
Frames 2…6: 2, 4, 8, and
12 kHz
Frame 7: 2, 4, and 8 kHz
Frame 8: 2, and 4 kHz
Output frequency range 0…400 Hz 0…420 Hz 0…325 Hz at 2 kHz carrier
0…590 Hz at 4kHz carrier
0…325 Hz at 2 kHz carrier
0…590 Hz at 4kHz carrier
Efficiency 97.5% typical 97.5% typical 97.5% typical 97.5% typical
Power factor 0.98 0.98 0.98 0.98
Overload capability:
Light duty———110%-60 s, 120%-3 s
(1)
Normal duty 110%-60 s, 150%-3 s 110%-60 s, 150%-3 s 110%-60 s, 150%-3 s 110%-60 s, 150%-3 s
Heavy duty 150%-60 s, 200%-3 s 150%-60 s, 200%-3 s 150%-60 s, 180%-3 s 150%-60 s, 180%-3 s
(1) Frame 8.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 9
Drive Selection Considerations Chapter 1
Table 2 - PowerFlex Drive Comparisons (continued)
PowerFlex Drive
700 Standard Cassette 700 Vector Cassette
Series B
753 755
Environmental Ratings
Enclosure types and ambient temperature range:
IP20, NEMA/UL Type Open 0…50 °C (32…122 °F) (1)
0 …40 °C (32…104 °F) (2)
0…65 °C (32…149 °F) (3)
0…50 °C (32…122 °F) (1)
0 to 40 °C (1…04 °F) (2)
0…65 °C (32…149 °F) (3)
0…50 °C (32…122 °F) (5) 0…50 °C (32…122 °F) (5)
IP00, NEMA/UL Type Open — — 0…50 °C (32…122 °F) (6) 0…50 °C (32…122 °F) (6)
IP20, NEMA/UL Type 1 (w/hood) — — 0…40 °C (32…104 °F) (5) 0…40 °C (32…104 °F) (5)
IP20, NEMA/UL Type 1 (w/label) — — 0…40 °C (32…104 °F) (6) 0…40 °C (32…104 °F) (6)
IP20, NEMA/UL Type 1
(MCC cabinet)
———0…40 °C (32…104 °F)
(9)
Flange enclosure types and ambient temperature range:
Front
IP20, NEMA/UL, Type Open
IP00, NEMA/UL, Type Open
—
—
—
—
0…50 °C (32…122 °F) (5)
0…40 °C (32…104 °F) (6) 0…50 °C (32…122 °F) (5) 0…40 °C (32…104 °F) (6)
Back/heatsink
IP20, NEMA/UL, Type Open
IP66, NEMA/UL, Type 4X
0…40 °C (32…104 °F) (2)
—
0…40 °C (32…104 °F) (2)
—
—
0…40 °C (32…104 °F) (7) — 0…40 °C (32…104 °F) (7)
Stand-alone/wall mount
IP54, NEMA/UL Type 12 — — 0…40 °C (32…104 °F) (7) 0…40 °C (32…104 °F) (7)
Storage temperature range -40…70 °C (-40…158 °F) -40…70 °C (-40…158 °F) -40…70 °C (-40…158 °F) -40…70 °C (-40…158 °F)
Standards and Certifications (See rok.auto/certifications website for the latest certifications)
UL Yes Yes Yes Yes
CE Yes Yes Yes Yes
CSA Yes Yes Yes Yes
C-Tick Yes Yes Yes Yes
ATEX Yes Yes No No
RINA Yes No No No
TUV-FS No No Yes Yes
ROHS Yes Yes Yes Yes
Protection
Motor overload Standard Standard Standard Standard
Output short circuit Standard Standard Standard Standard
Output ground fault Standard Standard Standard Standard
Under and over voltage Standard Standard Standard Standard
Dynamic braking Internal chopper (4) Internal chopper (4) Internal chopper (8) Internal chopper (8)
Common mode choke Internal (standard) Internal (standard) (1) External (optional) External (optional)
(1) Frames 0…6 only.
(2) Frames 7…10 only; applies to chassis (heatsink).
(3) Frames 7…10 only; applies to control (front of backplane).
(4) Standard on Frames 0…3 and optional on Frames 4…6.
(5) Frames 2…5 only.
(6) Frames 6 and 7 only.
(7) Frames 2…7 only.
(8) Standard on Frames 2…5 and optional on Frames 6…7.
(9) Frame 8.

10 Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Table 3 - PowerFlex Drive Comparisons (continued)
PowerFlex Drive
700 Standard Cassette 700 Vector Cassette
Series B
753 755
Protection (continued)
Common mode capacitors Standard Standard (1) Standard Standard
Safety input:
Torque-off card — — Standard Standard
Speed monitor — — Optional Optional
Hardware enable Standard Standard Standard Standard
EMC filters (internal) Standard Standard (1) Standard Standard
Drive Control Performance and Features
Motor control type:
Induction V/Hz Standard Standard Standard Standard
Induction sensorless vector
(SVC)
Standard Standard Standard Standard
Induction flux vector (FVC) — Standard with
FORCE Technology
Standard with
FORCE Technology
Standard with
FORCE Technology
Synchronous reluctance V/Hz Standard Standard Standard Standard
Synchronous reluctance SV — — Standard Standard
Adjustable voltage mode — Standard — Standard
Operating speed range 120:1 1,000:1 (2)
120:1 (3) 1,000:1 (2) 120:1 (3) 1,000:1 (2) 120:1 (3)
Speed control regulation
(% of base speed across
operating speed range)
0.5% across 80:1 0.001% across 120:1 (2)
0.1% across 120:1 (3) 0.001% across 100:1 (2) 0.1% across 120:1 (3) 0.001% across 100:1 (2) 0.1% across 120:1 (3)
Speed control bandwidth
(radians per second)
20 250 (2)
50 (3) 190 (2) 50 (3) 190 (2) 50 (3)
Slip compensation Standard Standard Standard Standard
Droop — Standard Standard Standard
Inertia adaption———Standard
Phase lock loop———Standard
Torque regulation — ± 2%, 2500 rad/sec (2)
± 5%, 600 rad/sec (3) ± 2%, 2500 rad/sec (2) ± 5%, 600 rad/sec (3) ± 2%, 2500 rad/sec (2) ± 5%, 600 rad/sec (3)
Features
Flying start Standard Standard (4) Standard (5) Standard (5)
Bus regulator Standard (4) Standard (4) Standard (4) Standard (4)
S-curve Standard Standard Standard Standard
Drive overload protection Standard (4) Standard (4) Standard (4) Standard (4)
Advanced diagnostics Standard Standard Standard Standard
(1) Frames 0…6 only.
(2) With encoder.
(3) Without encoder.
(4) Advanced.
(5) Advanced and non-advanced.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 11
Drive Selection Considerations Chapter 1
Table 4 - PowerFlex Drive Comparisons (continued)
PowerFlex Drive
700 Standard Cassette 700 Vector Cassette
Series B
753 755
Features (continued)
Input phase loss — Standard Standard Standard
User sets Standard Standard — —
Preset speeds7777
Process control loop Standard (2) Standard (2) Standard (2) Standard (2)
Fast flux up Standard Standard Standard Standard
Fast brake to stop — Standard Standard Standard
Flux braking — Standard Standard Standard
Feedback loss switchover — — Standard Standard
Real-time clock — — Standard Standard
Battery/auxiliary power back-up
(1)
— — Optional Optional
Multi-motor parameters————
Start on power-up Standard Standard Standard Standard
Integral position loop — Standard Standard Standard
PCAM planner———Standard
Electronic gearing — — Standard Standard
Speed/position profiler — Standard — Standard
Position indexer————
Predictive diagnostics — — Standard Standard
Torque proving — Standard — Standard
Conformal coating Standard Standard Standard Standard
Timer/counter functions — — Standard (4) Standard (4)
Embedded control — — Standard (4) Standard (4)
Supported Feedback Devices
Incremental encoder feedback — Optional Optional Optional
Pulse train input — Optional Optional Optional
Stegmann high-resolution———Optional
Heidenhain———Optional
SSI and BSSI linear ———Optional
Resolver————
User Interface
HIM/operator interface Optional (3) Optional (3) Optional (5) Optional (5)
Languages available (number) 7 7 9 (6) 9 (6)
Remote display Optional (3) Optional (3) Optional (5) Optional (5)
(1) Battery preserves the real time clock setting when power to the drive is lost or cycled, and provides absolute time stamping in fault queues.
(2) Advanced.
(3) A3 or A6 family.
(4) DeviceLogix.
(5) A6 family only.
(6) With A6 HIM.

12 Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Table 5 - PowerFlex Drive Comparisons (continued)
PowerFlex Drive
700 Standard Cassette 700 Vector Cassette
Series B
753 755
User Interface (continued)
HIM handheld terminal Optional (2) Optional (3) Optional (3) Optional (3)
Software configuration tools (1) Yes Yes Yes Yes
Setup tools or wizards Yes Yes Yes Yes
Communication Options
AS-i ————
BACnet Optional Optional — —
CAN/Euromap————
CANopen Optional Optional Optional (4) Optional (4)
CC-Link ————
ControlNet Optional Optional Optional Optional
DF1 Optional Optional Optional (4) Optional (4)
Data highway — — Optional (4) Optional (4)
EtherNet Optional Optional Optional Optional
EtherNet or TCP/IP————
EtherNet/IP Optional Optional Optional Standard
FIP I/O ————
Foundation fieldbus————
Interbus Optional Optional Optional (4) Optional (4)
Lecon-B ————
LonWorks Optional Optional — —
Metasys N2 Optional — — —
Modbus ASCII————
Modbus Plus————
Modbus RTU Optional Optional — —
Modbus TCP/IP Optional Optional Optional Optional
PROFIBUS DP Optional Optional Optional Optional
PROFINET — — Optional Optional
Remote I/O Optional Optional Optional Optional
SELMA 2————
SERCOS————
Siemens P1 Optional — — —
Uni-Telway————
USB Optional Optional Optional Optional
(1) Available software includes: RSLogix 5000 (version 16 or greater), DriveExplorer, and DriveExecutive.
(2) A3 or A6 family.
(3) A6 family only.
(4) Limited parameter accessibility.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 13
Drive Selection Considerations Chapter 1
PowerFlex Drive
Conversion Guide
The following tables are for migrating your PowerFlex 700 drive installation to a
PowerFlex 750-series drive.
Table 6 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions.
TIP
Voltage rating is 208V AC for all the drives that are listed.
PowerFlex 700 Drive (1) PowerFlex 750-Series Drive Conversion (2)
20B Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
20F/
20G
Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
2P2 2.5 0.37 0
336
(13.22)
110
(4.33)
200
(7.87)
2P2 2.5 0.37 2
424.2
(16.7)
134.5
(5.29)
212
(8.34)
4P2 4.8 0.75 0 4P2 4.8 0.75 2
6P8 7.8 1.50 1
135
(5.31)
6P8 7.8 1.50 2
9P6112.20 1 9P6112.202
015 17.5 4 1 015 17.5 4 2
022 25.3 5.5 1 022 25.3 5.5 2
028 32.2 7.5 2 342.5
(13.48)
222
(8.74)
028 32.2 7.5 3 454
(17.87)
190
(7.48)
042 48.3 11 3 517.5
(20.37)
042 48.3 11 3
0525615 3 05256154474
(18.66)
222
(8.74)
070 78.2 18.2 4 759
(29.88)
220
(8.66)
202
(7.95)
07078.218.2 5 555
(21.85)
270
(10.62)
0809222 4 08092225
104 120 30 5 644.5
(25.37)
309
(12.16)
275.5
(10.84)
104 120 30 6
665.5
(26.2)
308
(12.12)
346.4
(13.63)
130 130 37 5 130 130 37 6
154 177 45 6
850
(33.46)(3) 404
(15.9)
154 177 45 6
192 221 55 6 192 221 55 6
260 260 66 6 260 260 66 6
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm (38.4 in.) with required junction box if not cabinet-mounted.

14 Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Table 7 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions
TIP
Voltage rating is 240V AC for all the drives that are listed.
PowerFlex 700 Drive (1) PowerFlex 750-Series Drive Conversion (2)
20B Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
20F/
20G
Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
2P2 2.2 0.5 0
336
(13.22)
110
(4.33)
200
(7.87)
2P2 2.2 0.5 2
424.2
(16.7)
134.5
(5.29)
212
(8.34)
4P2 4.2 1.0 0 4P2 4.2 1.0 2
6P8 6.8 2.0 1
135
(5.31)
6P8 6.8 2.0 2
9P6 9.6 3.0 1 9P6 9.6 3.0 2
015 15.3 5.0 1 015 15.3 5.0 2
022 22 7.5 1 022 22 7.5 2
028 28 10 2 342.5
(13.48)
222
(8.74)
02828103454
(17.87)
190
(7.48)
042 42 15 3 517.5
(20.37)
04242153
0525220 3 05454204474
(18.66)
222
(8.74)
070 70 25 4 759
(29.88)
220
(8.66)
202
(7.95)
07070255555
(21.85)
270
(10.62)
0808030 4 08080305
104 104 40 5 644.5
(25.37)
309
(12.16)
275.5
(10.84)
104 104 40 6
665.5
(26.2)
308
(12.12)
346.4
(13.63)
130 130 50 5 130 130 50 6
154 154 60 6 850
(33.46)(3
)
404
(15.9)
154 154 60 6
192 192 75 6 192 192 75 6
260 260 100 6 260 260 100 6
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm (38.4 in.) with required junction box if not cabinet-mounted.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 15
Drive Selection Considerations Chapter 1
Table 8 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions
TIP
Voltage rating is 400V AC for all the drives that are listed.
PowerFlex 700 Drive (1) PowerFlex 750-Series Drive Conversion (2)
20B Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm, (in.)
20F/
20G
Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
1P1 1.3 0.37 0
336
(13.22)
110
(4.33)
200 (7.87)
2P1 2.1 0.75 0 2P1 2.1 0.75 2
424.2
(16.7)
134.5
(5.29)
212
(8.34)
3P5 3.5 1.5 0 3P5 3.5 1.5 2
5P0 5.0 2.2 0 5P0 5.0 2.2 2
8P7 8.7 4.0 0 8P7 8.7 4.0 2
011 11.5 5.5 0 011 11.5 5.5 2
015 15.4 7.5 1 135
(5.31)
015 15.4 7.5 2
0222211 1 02222112
030 30 15 2 342.5
(13.48)
222
(8.74)
03030153
454
(17.87)
190
(7.48)
037 37 18.5 2 037 37 18.5 3
043 43 22 3
517.5
(20.37)
04343223
0565630 3 06060304474
(18.66)
222
(8.74)
0727237 3 07272374
085 85 45 4 759
(29.88)
220
(8.66)
202 (7.95) 085 85 45 5 550
(21.65)
270
(10.62)
105 105 55 5
644.5
(25.37)
309
(12.16)
275.5
(10.84)
105 105 55 5
125 125 55 5 140 140 75 6
665.5
(26.2)
308
(12.12)
346.5
(13.64)
140 140 75 5 140 140 75 6
170 170 90 6 850
(33.46)(3
)
404
(15.9)
170 170 90 6
205 205 110 6 205 205 110 6
260 260 132 6 260 260 132 6
292 292 160 7 1499
(59.01)
514.5
(20.25) 407 (16) 302 302 160 7
881.5
(34.7)
430
(16.92)
349.6
(13.76)
325 325 180 7 367 367 200 7
365 365 200 8
2374
(93.46)
758
(29.84)
889 (35)
367 367 200 7
415 415 240 8 456 456 250 7
481 481 280 8 477 477 270 7
481 481 280 8 540 540 315 8 (4)
2453
(96.57)
600
(23.62) 800
(31.49)(5
)
535 535 300 8 540 540 315 8 (4)
600 600 350 8 600 600 355 8 (4)
730 730 400 9 1016 (40) 750 750 400 8 (4)
875 875 500 10 1268
(49.92)
889 (35) 910 910 500 9 (4) 1200
(47.24)
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm with required junction box if not cabinet-mounted.
(4) Frame enclosure is IP20, NEMA/UL Type 1 MCC style.
(5) The depth can be either 600 mm or 800 mm for 20G, frame 8, 9, and 10 depending on enclosure code.

16 Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Table 9 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions
TIP
Voltage rating is 480V AC for all the drives that are listed.
PowerFlex 700 Drive (1) PowerFlex 750-Series Drive Conversion (2)
20B Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
20F/
20G
Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
1P1 1.1 0.5 0
336
(13.22)
110
(4.33)
200
(7.87)
2P1 2.1 1.0 0 2P1 2.1 1 2
424.5
(16.71)
134.5
(5.29)
212
(8.34)
3P4 3.4 2.0 0 3P4 3.4 2 2
5P05.0 3 0 5P05.0 3 2
8P08.0 5 0 8P08.0 5 2
011 11 7.5 0 011 11 7.5 2
014 14 10 1 336
(13.22)
135
(5.31)
200
(7.87)
01414102
0222215 1 02222152
027 27 20 2 342.5
(13.48)
222
(8.74)
200
(7.87)
02727203
454
(17.87)
190
(7.48)
212
(8.34)
0343425 2 03434253
040 40 30 3
517.5
(20.37)
222
(8.74)
200
(7.87)
04040303
0525240 3 05252404474
(18.66)
222
(8.74)
212
(8.34)
0656550 3 06565504
077 77 60 4 759
(29.88)
220
(8.66)
202
(7.95)
07777605555
(21.85)
270
(10.63)
212
(8.34)
096 96 75 5 644.5
(25.37)
309
(12.16)
275.5
(10.84)
09696755
125 125 100 5 125 125 100 6
665.5
(26.2)
308
(12.12)
346.5
(13.64)
156 156 125 6
850
(33.46)(3) 404
(15.9)
275.5
(10.84)
156 156 125 6
180 180 150 6 186 186 150 6
248 248 200 6 248 248 200 6
292 292 250 7 1499
(59)
514.5
(20.25) 407 (16) 302 302 250 7
875
(34.44)
430
(16.92)
350
(13.77)
325 325 250 7 361 361 300 7
365 365 300 8
2374
(93.46)
758
(29.84)
889 (35)
361 361 300 7
415 415 350 8 415 415 350 7
477 477 400 7
481 481 400 8 485 485 400 8 (4)
2453
(96.57)
600
(23.62)
800
(31.49)(5
)
535 535 450 8
1016
(40)
545 545 450 8 (4)
600 600 500 8 617 617 500 8 (4)
730 730 600 9 740 740 650 8 (4)
875 875 700 10 1268
(49.92)
889 (35) 960 960 800 9 (4) 2453
(96.57)
1200
(47.24)
800
(31.49)(5
)
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm with required junction box if not cabinet-mounted.
(4) Frame enclosure is IP20, NEMA/UL Type 1 MCC style.
(5) The depth can be either 600 mm or 800 mm for 20G, frame 8, 9, and 10 depending on enclosure code.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 17
Drive Selection Considerations Chapter 1
Table 10 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions
TIP
Voltage rating is 600V AC for all the drives that are listed.
PowerFlex 700 Drive (1) PowerFlex 750-Series Drive Conversion (2)
20B Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
20F/
20G
Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
1P7 1.7 1.0 0
336
(13.22)
110
(4.33)
200
(7.87)
1P7 1.7 1 3
454
(17.87)
190
(7.48)
212
(8.34)
2P7 2.7 2.0 0 2P7 2.7 2 3
3P9 3.9 3.0 0 3P9 3.9 3 3
6P1 6.1 5.0 0 6P1 6.1 5 3
9P0 9 7.5 0 9P0 9 7.5 3
011 11 10 1 135
(5.31)
011 11 10 3
017 17 15 1 017 17 15 3
022 22 20 2 342.5
(13.48)
222
(8.74)
022 22 20 3
027 27 25 2 027 27 25 4 474
(18.66)
222
(8.74) 212
(8.34)
032 32 30 3
517.5
(20.37)
032 32 30 4
041 41 40 3 041 41 40 5 550
(21.65)
270
(10.62)
052 52 50 3 052 52 50 5
062 62 60 4 759
(29.88)
220
(8.66)
202
(7.95)
063 63 60 6
665.5
(26.2)
308
(12.12)
346.5
(13.64)
077 77 75 5 644.5
(25.37)
309
(12.16) 275.5
(10.84)
077 77 75 6
099 99 100 5 099 99 100 6
125 125 125 6 850
(33.46)(3
)
404
(15.9)
125 125 125 6
144 144 150 6 144 144 150 6
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm with required junction box if not cabinet-mounted.

18 Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Table 11 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions.
TIP
Voltage rating is 690V AC for all the drives that are listed.
PowerFlex 700 Drive (1) PowerFlex 750-Series Drive Conversion (2)
20B Amps
HP
(ND) Frame
Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
20F/
20G Amps
HP
(ND) Frame
Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
052 52 45 5 644.5
(25.37)
309
(12.16)
275.5
(10.84)
05050456
665.5
(26.2)
308
(12.12)
346.5
(13.64)
0606055 5 06161556
082 82 75 5
850 (3)
(33.46)
404
(15.9)
08282756
0989890 6 09898906
119 119 110 6 119 119 110 6
142 142 132 6 142 142 132 6
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm with required junction box if not cabinet-mounted.

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 19
Drive Selection Considerations Chapter 1
Dimensions
Figure 2 - PowerFlex 700 Frames 0…3 to PowerFlex 750-Series Frames 2 and 3
Dimensions mm (in.)
DriveFrameABCDE FGH
700 0 110.0 (4.33) 80.0 (3.15) 200.0 (7.87) 336.0 (13.23) 320.0 (12.60)
1 135.0 (5.32) 105.0 (4.13) 200.0 (7.87) 336.0 (13.23) 320.0 (12.60)
2 222.0 (8.74) 192.0 (7.56) 200.0 (7.87) 342.5 (13.48) 320.0 (12.60)
3 222.0 (8.74) 192.0 (7.56) 200.0 (7.87) 517.5 (20.37) 500.0 (19.69)
750-Series 2 134.5 (5.30) 100.0 (3.94) 212.0 (8.35) 424.2 (16.70) 404.2 (15.91) 222.2 (8.75) 497.1 (19.57) 38.0 (1.50)
3 190.0 (7.48) 158.0 (6.22) 212.0 (8.35) 454.0 (17.87) 435.0 (17.13) 223.1 (8.78) 530.1 (20.87) 38.0 (1.50)
C
A
B
E
D
HOT surfaces can cause severe burns
CAUTION
C
A
B
E
D
F
H
G
PowerFlex 700 Frames 0…3
(Frame 0 shown)
PowerFlex 750-Series Frames 2 and 3
(Frame 2 shown)
PowerFlex 750-Series
2 and 3 w/NEMA 1 Kit
(Frame 2 shown)

20 Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019
Chapter 1 Drive Selection Considerations
Figure 3 - PowerFlex 700 Frame 3 to PowerFlex 750-Series Frame 4
Dimensions mm (in.)
DriveFrameABCDE FGH
700 3 222.0 (8.74) 192.0 (7.56) 200.0 (7.87) 517.5 (20.37) 500.0 (19.69)
750-Series 4 222.0 (8.74) 194.0 (7.64) 212.0 (8.35) 474.0 (18.66) 455.0 (17.91) 222.7 (8.77) 564.4 (22.22) 154.7 (6.09)
C
A
B
E
D
C
A
B
E
D
F
H
G
PowerFlex 700 Frame 3 PowerFlex 750-Series Frame 4 PowerFlex 750-Series
Frame 4 w/NEMA 1 Kit