Allied Telesis Converteon AT-CV5000 User manual

Datasheet | Media Converters
AT-CV5000
18 slot Converteon chassis
Overview
The AT-CV5000 is one of a family of metal
chassis designed to house 1, 2or 18
Converteon media blades.The AT-CV5000 is
the 18 slot chassis, AT-CV1203 is the two slot
chassis and AT-CV1000 is the one slot chassis.
Power Options
All the Converteon power supplies are hot
swappable and modular, installing two into a
chassis provides redundancy should a single
power supply fail. In an unmanaged chassis, the
status of each power is displayed via an LED
indicator on the front panel, and via an LED on
the power supply module at the rear. A fully
loaded chassis can run continuously with only
one power module fitted into the chassis.
Redundancy
To further increase system reliability, the
AT-CV5000 chassis is fitted with two hot
swappable fan modules. Both fan modules can
be easilyremoved from the rear of the chassis,
without interruption to the operation of the line
cards. A fully loaded chassis can run continuously
with onlyone fan module fitted into the chassis
•AT-CVFAN Fan module
Network Management
The AT
-CV5000 chassis can operate in an
unmanaged mode, by the installation of any
number of media blades. Blades will be
configured manually using DIP switches located
on each blade.Alternatively, an SNMP
management card can be installed into one of
the slots in the chassis, which will provide a
network administrator with the ability to
configure and monitor the status of the blades.
Management can be achieved locallyover
RS232, or over the network by Telnet or SNMP.
If the blades support Ethernet in the First Mile
(IEEE 802.3ah), then the management module
can also configure and monitor the status of a
remote blade.
•AT-CM501 Management card
Chassis Status
If the AT-CV5000 has a management card
installed, then a network administrator can also
check the status of the chassis, the status of the
fans and the power supply modules. By ensuring
the continued performance of all components in
the chassis, the overall reliability of the network
can be improved.
Protocol Agnostic
The AT-CV5000 chassis has been designed to
be protocol, and speed agnostic.This allows
networkadministrators to deploy the chassis in
awide range of network topologies in addition
to onlyEthernet-based networks.Technologies
supported by the chassis include Ethernet, Fast
Ethernet, Gigabit, E1/T1 and serial
communications.
Hassle Free Support
The Allied Telesis AT-CV5000 Converteon
chassis offersfree technical support, ensuring
trouble-free installation.
Key Features
•18 slot media and rate converter chassis
•Single, or optional redundant power supplies
•Hot swappable power supplies
•Hot swappable fan modules
•Support for unmanaged or managed operation
•Requires only 2RU of rack space
•19” rack-mountable
AT-CV5000
ConverteonTM Chassis
Allied T
elesis www.alliedtelesis.com

Technical Specifications
Status Indicators
LED State Description
RDY (For future use)
Green The module installed in
the rear expansion slot has
passed diagnostics and is
ready.
Off The module installed in
the rear expansion slot has
failed diagnostics and is
not ready, or is not
installed.
MSTR (for future use)
Green This AT-CV5000 chassis is
acting as a stacking master
(via a module installed in
the rear expansion slot).
Off This AT-CV5000 chassis is
not a stacking master.
FLT (for future use)
Green The module installed in
the rear expansion slot has
experienced fault condition,
or is not installed.
Off The module installed in
the rear expansion slot has
reported no fault
condition.
PS-A Green Power supply in slot A is
operating normally.
Off Power supply in slot A is
OFF, not present, or has
failed.
PS-B Green Power supply in slot B is
operating normally.
Off Power supply in slot B is
OFF, not present, or has
failed.
FAN-A Green Fan module in fan tray
slot Ais operating
normally.
Off Fan module in fan tray
slot A is OFF,not present,
or has failed.
FAN-B Green Fan module in fan tray
slot B is operating
normally.
Off Fan module in fan tray
slot B is OFF, not present,
or has failed.
Connectors
The front panel features an RS232 (DB9) connector,
which will be used to provide connectivity to a rear
mounted expansion card in the future.
Physical Specifications
Dimensions: 34.25cm x 44.05cm x 8.68cm
(W x D x H) (13.49” x 17.35” x 3.42”)
Weight: 7.5kg (16.6lbs) w/o P/S
Power Characteristics
AC input voltage: 90 ~ 240V AC 47/63Hz
AC input current: 90-120V AC (3.6A)
200-240V AC (1.57A)
Environmental Specifications
Maximum operating 0°C to 40°C
temperature: (32°F to 104°F)
Maximum storage -25°C to 70°C
temperature: (-13°F to 158°F)
Operating and Up to 3,048 meters
storage altitude: (10,000 feet)
Relative humidity 5% to 90% non-condensing
operating:
Relative humidity storage: 5% to 95% non-condensing
Predicted MTBF (Telcordia SR332): 64,000 hrs
Standards
EMI part 15:
FCC class A, EN55022 class A, VCCI class A, C-Tick, CE
Immunity:
EN55024
Safety:
UL60950-1 (cULUS), EN60950-1 (TUV)
Ordering Information
AT-CV5000-00
18-slot AC chassis with no power supply
AT-PWR14
AC redundant power module for AT-CV5000 chassis
Associated Products
AT-CVFAN
Replacement fan module for AT-CV5000 chassis
AT-CV5M01
SNMP management module for AT-CV5000 chassis
AT-CV1000-xx
Single slot Converteon chassis
AT-CV1203-xx
Two slot Converteon chassis
AT-CV5000 |18 Slot Converteon Chassis
USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 T
ai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2007 Allied T
elesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000143 Rev.H