Allied Telesis AT-2701FX User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Network Interface Cards
AT-2701FX
PCI 32-bit Fast Ethernet Fiber Network Interface Card
A
T-2701FX
100Mbps Fast Ethernet fiber interface card
Choice and Flexibility
Resistant to signal degradation, snooping, and
interference, the AT-2701FX is the ideal solution
for networks requiring protection from electrical
interference and hackers.The small footprint—
together with the low-profile option of the
AT-2701FX—make these products a perfect
choice for PCs equipped with small desktop
solutions.
Advanced Manageability
Allied Telesis’ AT-2701FX features a full-line of
card assistant software:
•AT-Setup reduces Window Driver installation to
amouse click.This Windows program guides
users through driver installation, updates, and
problem corrections.
•AT-Stat is an advanced Windows application
that reports network conditions and
performance such as hardware resources,
network statistics, and configuration.
•The VLAN protocol driver allows network
administrators to configure their VLAN network
fabric at the PC instead of the switch, enabling
transparent movement of systems between
switches.
•TCP/IP checksum off-loading improves CPU
use by verifying TCP/IP traffic checksums at the
interface card rather than at the host processor,
improving overall system performance for
slower PCs.
•Packet prioritization enables Windows
applications with Class of Service capabilities to
prioritizeout-bound packet streams to these
NICs, a useful feature for video streaming and
VoIP where interruptions are unacceptable.
•The AT-2701FTX’s onboard Managed Boot
Agent (MBA) provides a wide set of industry-
standard boot protocols, including PXE,
NetWare NCP/IPX, IBM’s RPL, traditional
DHCP, and BOOTP, supporting both BBS (BIOS
Boot Specification) and non-BBS compliant PCs.
It also includes an extensive set of utilities for
boot ROM configuration, as well as access to
pre-OS and network boot image files.
•Offering a wide range of connector choices—
ST
,SC,or MT-RJ—these cards meet the
requirements of most fiber installations.
Key Features
Management Software
•VLAN support
•Link aggregation
•Failover
Advance Properties
•PCI 2.2 compliant
•Wake-on-LAN (WoL) supported (enabled by
default, utility to disable available in firmware)
•Secured transmissions
•Advanced installation utility
•Advanced diagnostics
•Remote boot (PXE 2.1)
•TCP/IP checksum off-loading
•Priority queuing
•Driver support for popular operating systems
including Sun Solaris
•Available with SC, ST, or MT-RJ fiber
connections
•Compliant with the
Trade Agreement Act
•Microsoft certified drivers
•RoHS compliant
•Low-profile and standard height brackets
included
•IPv6
•Also can be used in PCI-x bus

USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2009 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000248 Rev. F
AT-2701FX |32-bit PCI Fast Ethernet Fiber Network Interface Card
Specifications
Management Features
WMI
ACPI 2.0/wOI
PXE 2.1 Boot ROM
Bus Type
PCI 2.2
Ethernet Standards
IEEE 802.1p Quality of Service
IEEE 802.1Q VLANs
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3u Fast Ethernet
Drivers
Supported
Windows 7
Windows 2008
Windows Vista
Windows Vista 64-bit
Windows XP
Windows XP 64-bit
Windows 2003
Windows 2003 64-bit
Windows 2000
NDIS2
NetWare 6.x
Linux 2.4
Linux 2.6
Available
Windows NT 4
Solaris x86
Solaris Sparc 32-bit
Solaris Sparc 64-bit
NetWare 5.x
Compliance
RoHS
UL
FCC/EN55022 Class B
TUV
EN55024
CE
C-TICK
VCCI
Connectors
SC
ST
MT-RJ
Optical receive sensitivity (max) -31dBm
Transmit optical power (min/max) -19/-14dBm
Environmental Specifications
Operating temperature 0°C to 50°C
Storage temperature -25°C to 70°C
Relative humidity 5% to 90% non-condensing
Power
Power consumption 2 Watts @ 3.3v
Signaling voltage 3.3/5V
Status Indicators
100 ON 100Mbps link up
Green Full-duplex mode
Yellow Half-duplex mode
Blink Activity
OFF 100Mbps link down
Physical Characteristics
Dimensions 16.8cm x 6.5cm
(W x H) (6.7”) x (2.6”)
Ships with low profile bracket attached to interface card.
Standard bracket is included in packaging.
Network Type
100FX
Network Controller
AMD AM79C976
Ordering Information
AT-2701FX/AA-xxx
100Mbps Fast Ethernet dual fiber interface card
Where AA = ST, SC, or MT-RJ
Where xxx = 001 for single pack
901 for single pack,
compliant with Trade Agreements Act
Ships with low profile bracket attached to interface card.
Standard bracket is included in packaging.