Allied Telesis AT-2972SX/2 User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Network Interface Cards
AT-2972SX/2
PCI-Express Dual Port Fiber Gigabit Interface Card
A
T-2972SX/2
PCIe x 4 (channels) dual port fiber Gigabit
interface card
More Bandwidth with PCI-Express
Interface
The PCI-Express (PCIe) design gives you the
maximum possible bandwidth and bus efficiency.
Other benefits are capability and low power
consumption.
High Reliability
The AT-2972SX/2 Gigabit interface card comes
with a comprehensiveMicrosoft Windows
utility that performs detailed tests, diagnostics
and analysis.
Advanced Manageability
The priority queuing offered by AT-2972SX/2
can help you set-up your network based on
your own needs.The comprehensive diagnostics
and configuration software suite provides
system adminstratorsand engineerswith a
profound tool to analyze the interface card to
check specific data.
Dual Port Fiber Interfaces
Two fiber port interfaces (LC connectors) give
you maximum protection against failure. If one
link goes down, the other keeps sending data to
prevent network down time.The two ports can
also be trunked to increase bandwidth in server
type applications.
Key Features
Management Software
•VLAN support
•Link aggregation LACP
•Link aggregation smartswitch
•Failover
Advance Properties
•Jumbo frames
•Checksum offloading
•Secure transmissions
•PCI-Express (PCIe) x 4
•Windows Vista
•IEEE 802.1x flowcontrol
•IEEE 802.1p-based traffic prioritization
•PXE remote boot support
•Low-profile and standard height brackets
included
•Microsoft certified drivers
•RoHS compliant
•Load balancing
•CPU task offload
•TCP segmentation
•SNMP
•IPv6
•Compliant with the
Trade Agreement Act

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000234 Rev C
AT-2972SX/2 |PCI-Express Dual Port Fiber Gigabit Interface Card
Specifications
Management Features
WMI
ACPI 1.1
PXE 2.1 Boot ROM
SNMP
Bus Type
PCIe x4
Ethernet Standards
IEEE 802.1p Quality of Service
IEEE 802.1Q VLANs
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3az 1000SX
IEEE 802.3x Flow control, auto-negotiation
IEEE 802.3z 1000X
IEEE 802.3ad Link aggregation
Drivers
Supported
Vista
Vista 64-bit
Windows XP
Windows XP 64-bit
Windows 2003
Windows 2003 64-bit
Windows 2000
NDIS2
NetWare 6.x
Linux 2.4
Linux 2.6
Available
Windows NT 4
Solaris x86
Solaris Sparc 32-bit
Solaris Sparc 64-bit
NetWare 5.x
Compliance
RoHS
UL
FCC/EN55022 Class B
TUV
EN55024
CE
C-TICK
VCCI
Connectors
LC
Optical input power (min) -17dBm
Transmit optical power (min/max) -9.5/-1.5dBm
Environmental Specifications
Operating temperature 0°C to 50°C
Storage temperature -25°C to 70°C
Relative humidity 5% to 90% non-condensing
Power
Power consumption 9.9 Watts (max)
Signaling voltage 3.3V
Status Indicators
LED 2 ports
1000 ON 1000Mbps link up
OFF 1000Mbps link down
ACT ON Receiving/transmitting
OFF Not receiving/
not transmitting
Physical Characteristics
Dimensions 16.8cm x 6.8cm
(W x H) (6.7”) x (2.7”)
Weight 0.07kg
Ships with standard bracket attached to inrterface card.
Low-profile bracket is included in packaging.
Network Type
1000SX
Network Speed
Auto-negotiation
Network Controller
Broadcom BCM5715S
Ordering Information
AT-2972SX/2-xxx
PCIe x 4 dual port fiber Gigabit interface card
Where xxx = 001 for single pack
020 for 20-pack
901 for single pack, Federal and
Government
920 for 20-pack, Federal and
Government
Ships with standard bracket attached to inrterface card.
Low-profile bracket is included in packaging.