Alligator KC-9512 User manual

KC-9512/P-25 Digital FMTransmitter with Auto Power
Adaptor
Instruction Manual
FM Transmitter with Car Adapter is designed for the iPod/mini iPod/iPod Photo/iPod nano/iPodVideoconsoles
to useonthe road. The CarAdapter notonly charges your iPod,but alsobroadcast music through theFMradio
channels in automobile. FMTransmitter can memorize the channel for easier search. It enables iPod playing
music without earphone and let everyoneinside automobile couldshare the joyoflistening hot songs together.
Features
1. Listening and Charging iPod at the same time
2. Safe placement to your iPod by6 plates for different models ofiPod.
3. Car Adaptor can move up and downwith5 different angles for large extent of flexibility
4. The clear bluebar
5. Lcd display the frequency
6. EasyOperationby Upand Downbuttons to select radio frequency
7. Digital frequencyselectionallows stable and clear broadcast ofthe FM Transmitter
8. LED lights up onthetopofCar Adapter for indication of connection
9. Memorize your channel, keep away interference fromother FMsignals
Operation
1. Turn off iPod console before connecting FM Transmitter withCar Adapter
2. Select the appropriate tray (shown under the tray) to match up with your corresponding iPod console.
3. Plugthe Car Adapter into the cigarette socket ofyour car, the LED onthe top of Car Adapter will then
light on and the FMtransmitter will then displaythe channel
4. Plug the power cable into the iPod console which will indicates charging status if connected properly
5. Turn on the iPod
6. Press the Up or Downbutton ofFM transmitter to select the frequency
7. Makesure to match the FM Transmitter with your car radio on thesamefrequency, andthen car sFM
stereo could broadcast the music ofiPod ifsucceed.
8. Pressing MEM(M) button tomemorize the desiredradio channel
9. Turn off iPod before unplugFM transmitter with Car Adapter or when not in use
10. Store andoverwrite the channel:
lChoose the desired frequencybypressing UP or Down button
lPress the MEM continuouslyuntil the “M”appears on the screen andthe unit offrequency
flashes below.
lWhen theunitoffrequencyflashes 3times, itrepresents for success ofstorage. Releasethe
button and select the other desired frequency.

Specification
1. InputVoltage: DC12 V 0.8A
2. Output Voltage: DC11.3 V 0.8A
3. Safetyfuse: 1A
4. High-stabilitycrystal oscillator
5. Phase-lockloop control
6. Radio FrequencyRange:88.1MHz-107.9MHz
7. FrequencyResponse: 150Hzto 20KHz
8. Stereo separation:-25dB at 25cm
9. Signal distortion: less than5%
10. StationMemoryPresets: 10 Channels
11. Maximumreceivable range: 19.5 feet
Precautions
lWhen iPod is in use with FM transmitter with Car Adaptor, avoid using it with any devices simultaneously.
"NOTE:Changesor modifications not expresslyapproved bythe partyresponsible for compliance
could void the user s authorityto operate the equipment."
NOTE:
This equipment has beentested and foundto complywith the limitsfor aClass Bdigitaldevice, pursuant
to Part 15 of the FCC Rules. These limitsare designed to providereasonable protection against harmful
interference in aresidential installation. This equipment generates, uses andcan radiate radio frequency
energyand, if not installedand used in accordancewith the instructions, maycause harmful interference
to radio communications.However,there is no guaranteethat interference will not occur in aparticular
installation. Ifthis equipment does causeharmful interference to radio or televisionreception, whichcan
be determinedbyturningthe equipment offandon, the user is encouragedto try to correct the
interference byone or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: S4CKC9512
MADE IN CHINA
This device complies withpart 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device maynot cause
harmful interference, and (2) this device must
accept anyinterference received, including
interference that maycauseundesired
operation.
Date:25/11/2005