Alpha Techno AT-233B User manual

AT-233B

Hello
Congratulations on purchasing your new Relax Massage-chairs.
At Alpha Techno we understand that every body is different and have carefully
designed your massage chair with that in mind. But enough about us, this is
about you. Learning how to use your new chair is simple(we designed it that
way).
So let’s get started.
1
Safety instructions .......................................................................... 2-3
Controller disgram ................................................................4-6
Chair installations ................................................................7-8
Features ..................................................................................9
Troubleshooting ................................................................10
Product specifications ..........................................................11
TABLE OF CONTENTS

●There are certain precautions that should be taken during the operation of the
massage chair. Read and follow these safety instructions carefully in order to
ensure safe operation and to prevent injury and/or product damage.
DANGER--- to reduce the risk of electric shock:
Always unplug the massage chair from the electrical outlet immediately after using
and before cleaning.
WARNING--- to reduce the risks of burns, fire, electric shock, or injury to persons:
● Please ensure that you insert massage chair plug into a proper electrical outlet.
● Make sure the power plug is securely inserted into the proper electrical outlet to
reduce the risk of short-circuit and fire.
Always unplug the massage chair from the electrical outlet immediately after use
and before cleaning.
● Do Not use the massage chair in places where the humidity is high.
●Do Not use the massage chair outdoors and avoid places with direct sunlight.
● Do Not operate under blanket or pillow. Excessive heating can occur and cause
fire, electric shock, or injury to persons.
● Never operate the massage chair if the power cord is wet or damage.
● Never plug/unplug the power cord from the socket with wet hands.
● Close and continuous s upervision is necessary when this appliance is used by,
on, or near children, invalid or disabled person.
● Use this appliance only for its intended use as described in this user manual.
● Do Not stand, sit or jump in the calves rest when shiatsu recliner is in use. This
may result injury to you.
●Do Not attempt to stand on the backrest and armrest. This may result in injury.
2
Safety Instructions1

● Be careful not to fall asleep during the massage.
Always keep the massage chair clean and never insert any object into the gaps on
and around the massage chair.
● Do Not move the massage chair by pulling the power supply cord.
Ensure that there are no persons(children in particular), pets or obstacles under-
neath the massage chair prior to lowering legrest/backrest.
● If you experience pain during usage, stop using the massage chair immediately.
If any injuries occur, consult a doctor immediately.
● Never massage swollen or inflamed parts of the body.
● This product is non-professional appliance designed to provide a comfortable
massage. Do not use this product as a substitute for medical treatment.
● Do Not use the shiatsu massage mechanism for more than 30 minutes at a time.
● Do Not operate where spray products are used or where oxygen is being admin-
istered.
● When the unit is working, do not touch the spinning massage mechanism with
any body part except back.
● If the fabric or material covering the massage mechanism becomes torn or dam-
aged, discontinue use.
● Never put any body part (i.e. fingers, hand) into the interior of the unit.
Only gentle force should be exerted against the unit in order to eliminate any/all
risk of injury.
● You may soften massage force by placing a towel between yourself and the unit.
3

Upper
Full
Vib1 Vib2
ON/OFF
Lower
Pause
4
Controller
2

NOTE: Please pull the padded flap covers when use.
Please note that in the massage chair position, the massaging heads will protrude
out in the lumbar region and may be uncomfortable. To minimize discomfort, you
may choose to place a foam lumbar support cover over the massaging heads
when the massaging features are switched off.
1)Controller-massage functions operation
10min/20min/30min
You could adjust the massage time to press these buttons.
DEMO
To start to activate the massage chair.
FULL
Press this button to activate the kneading massage on your full back. Move from
up and down. Press again to deactivate.
UPPER
Press this button to activate the kneading massage on your upper back. Press
again to deactive.
LOWER
Press this button to activate the kneading massage on your lower back. Press
again to deactive.
5
OPERATION GUIDE
3

VIBRATION
For vibration when massage is on. Simply press the button. There are two options
of massage strengths: low and high. The default setting is low. To change the
strength of your vibration massage, simply press the button Vib2. Press again to
deactivate.
PAUSE
If you would like to stop massaging, simply press the button. Press again to start
again.
POWER
Press the power button to turn on the massage function. The LED indicator will
illuminate and confirm your selection. To turn off the massage function, simply
press the button again. The LED indicator will blink while the dual massage mech-
anism returns to its lowest point and then it will turn off.
6

Step 1: To install the footrest, use the screw to fix the connector.
Step 2: Use the screw to fix the specified location on footrest.
7
Chair Installations
4

Step 3: To install seat part. Use the screw and connector to fix
position which mentioned in step 2.
Step 4: To install backrest. Use screw to fix it together with seat
part and footrest.
8

Adjust side knob to put chair in any reclining positions you would like.
3 choices of massage program:
-Full back
-Lower back
-Upper back
Soothing heat:
-Increase the benefits of massage
-Helps muscles relaxation
-Stimulates blood circulation
Programmed Vibrating massage in seat
2 different levels of intensity:
-Helps relaxation
-Eliminates muscle stiffness
Cushion and comfortable cover: for a gentle massage
Use-friendly controller imbedded on the armrest.
Comfortable and stylish design.
9
Features
5

The massage chair mechanism is controlled by a microcomputer and is susceptible
to power surges of +10 to-10%. The following situation may display in the event of a
power surge:
Situation Solution
The shiatsu mechanism is connect-
ed to the power supply but is not
function.
The controller works, but the
shiatsu massage mechanism is not
functioning.
Both the controller and the shiatsu
massage mechanism are not
functioning.
The shiatsu massage mechanism may
have overheated due to prolonged use.
Turn off the power and allow the
shiatsu massage mechanism to coll
for 30-50 minutes.
1.Make sure the shiatsu massage
mechanism is plugged into a working
outlet.
2.Turn the power off and then on
again.
Check to see that the plug is well
connected and working.
10
Troubleshooting
6

Description
Product
Rated voltage/Frequency
Power
Timer
Dimension
Weight
AT-233B
230V/50Hz
25W
10/20/30 Minutes
Gross weight: 26.5KGS
Net weight: 20KGS
Specifications
Carton package size(L*W*H): 880*680*380MM
Recline size(L*W*H): 1160*610*940MM
Upright size(L*W*H): 740*610*1090MM
11
Product specifications
7