Alpha Techno AT-599I User manual

USER MANUALAT-599I

1
Table of Contents
Thank you for purchasing the AT-599I Massage Chair.
Before using your massage chair, please read the contents of this
instruction manual and refer to it when needed.
Luxury Features ………………………..………....…… 2
Safety Precautions ………………………..…………… 3 - 4
Chair Components ……………..........……….......…… 5 - 6
Chair Installing …………………………………….....… 7 - 9
Moving the Chair ……………………………………..… 10
Grounding Instructions ……………………...........…… 11
Chair Specifications ……………………………….....… 12
Operation Guide ……………………………………...… 13-17
Troubleshooting ………………………………...……… 18
Warnings ………………………….....…....................… 18

2
Luxury Features
01
● Auto-scanning automatically or manually customizes a personal massage
specifically for each user.
● Invigorating air pressure system in seat and calves.
● Six pre-programmed massage sessions with customizable speed, width and
intensity.
● Ability to manually program any combination of massage techniques and to
adjust rollers to desired location for kneading and Tapping techniques.
● Fifteen-minute program duration with automtic shut off.
● User-friendly LCD remote controller.
● Ergonomically designed for optimum comfort.
AT-599I Luxury Massage Chair
The Luxury Massage Chair is controlled by a microcomputer that performs a variety
of intelligent massage techniques and combinations that are designed to soothe sore
muscles, alleviate stress and fatigue, increase metabolism and energy,and improve
blood circulation.

3
Safety Precautions
02
When using the massage chair, basic precautions should always be followed to
reduce the risk of electric shock, burns, fire or injury to persons. Please read the
following precautions before using the massage chair.
● Make sure the power plug is securely inserted into a proper electrical outlet to
reduce the risk of short-circuit and fire.
● Always unplug the massage chair from the electrical outlet immediately after
using and before cleaning.
● DO NOT use the massage chair in areas where the humidity is high such as a
sauna or steam room.
● DO NOT use the massage chair outdoors and avoid areas with direct sunlight.
● If the electricity is off, turn the power switch to the OFF position and unplug the
massage chair form the electrical outlet to prevent any damages to your chair
when the electricity comes back on.
● Never plug/unplug the power cord plug socket with wet hands.
● Close and continuous supervision is necessary when the massage chair is used
by, on or near children or disabled persons.
● No more than one person should use the massage chair at a time.
●
The massage chair is intended to be used as described in the Instruction Manual.
Do not use any attachments other than those recommended.
● If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
● DO NOT attempt to stand or sit on the backrest or footrest in order to prevent
accident, injury or damage to the chair.
● Avoid falling asleep while using the massage chair.
● Always keep the massage chair clean, and never insert any objects into or
around the gaps of the massage chair.
● DO NOT move the massage chair by pulling on the power supply cord.
● Make sure there are no children, pets or other obstacles behind or underneath
the massage chair.
● If you find any rips or tears in the fabric of the massage chair contact our service
department.

4
● This massage chair is designed for household use and should not be used in
non-residential settings.
● Please consult your doctor if you are in doubt as to whether or not you should
use this massage chair.
● Please consult a doctor before using the massage chair if you are pregnant,
undergoing any medical treatment, using a medical electronic device such as
a pacemaker, or are experiencing any of the following: Malignant tumor, heart
disease, back pain, abnormal or curved back bone, osteoporosis or acute illness.
● If you experience pain while using the massage chair, stop using it immediately
and consult your doctor.
● Never use a massage function on swollen or inflamed parts of the body.
● DO NOT use the massage chair for more than 30 minutes at a time.
● DO NOT use the massage chair where aerosol (spray) products are being used
or where oxygen is being administered.
● This massage chair is a non-professional product designed to provide a
comfortable massage and should not be substituted for appropriate medical
treatment.

5
Chair Components
03
Remote Controller
Backrest
Backrest
Pillow Pad
Backrest Pad Spare Pad
Side Panel
Seat Pad
Armrest
Footrest
Wheels
Chair Supporter Power switch

6
MASSAGING POSITION
Roller
Roller

7
04
Step 2:
Insert the wire plugs into the seat as demonstrated in PIC 1.
Note: Insert black to black and gray to gray, otherwise damage to the chair may result.
Black
Grey
Grey
Black
PIC 1
Step 1:
When setting up the chair, make sure there is at least two feet of space behind the
backrest and two feet of space in front of the footrest.
at least 2 ft. at least 2 ft.
Chair Installation

8
Step 3:
Unfold the backrest until you hear a “click” sound.
Step 4:
Attach the backrest pad and the pillow pad with the zipper, hook and loop fasteners.
1 2
3 4

9
Step 5: (Optional)
Remove the spare pad located in the backrest cover for a deeper massage.

10
05 Moving the Chair
1. Restore the footrest to its original position.
2. Hold down on the top of the backrest and tilt approximately 45 degrees. Move the
chair using the wheels as the fulcrum.
Note:
1) Always return the footrest to its original length and restore it to its original position
before moving the chair. Otherwise, injury during movement may result.
2) Do not move the chair while a person is seated on it.
3) Place a mat on the floor and gently roll the chair over it to avoid damaging the floor.

11
Grounding Instructions
06
Fully insert the plug into an appropriate outlet.
An improper equipment-grounding conductor may result in electric shock. Contact
a qualified electrician if you are not sure that the product is properly grounded. Do
not modify the plug that is included with the massage chair. If the plug does not fit
the outlet, contact a qualified electrician to install an outlet to fit the massage chair
plug.

12
Chair Specifications
07
Model No.
Rated Voltage
Rated Frequency
Rated Power Consumption
Timer
Max Time Rate
Dimensions(LxWxH)
Weight
Length of Wire
Usage Condition
Storage Condition
Description Specifications
AT-599I
120V AC
60Hz
180W
15 minutes
60 minutes
Shipping dimensions: 49.3" x 31" x 34.3"
Reclined dimensions: 65" x 28.7" x 33.5"
Upright dimensions: 45" x 28.7" x 49"
Gross weight: 207 lbs.
Net weight: 163 lbs.
Controller wire: 1.3m
Power supply wire: 2.2m
Temperature: 10°~ 40°
Humidity: 30-85 RH
Temperature: 20°~ 60°
Humidity: 30-85 RH

13
Operation Guide
08

14
Massage Chair Control Buttons
1. ON/OFF
Massage chair power switch
Press this key once will turn on the backlight of the LCD screen. Press any button to
begin the massage functions.
Press this key again, the massage chair stops operating and resets automatically to
enter into a standing mode.
2. Pause
When the chair is in massage mode and the user wants to temporarily pause it,
press the Pause button and all massage functions will stop. Press it again to
immedistely cease the ''Pause" function and resume the original massage function.
3/4. Recline/Rise
Massage Angle Adjustment Control Buttons
When plugging in, the massage chair enters into ready state.At the moment you can
adjust the massage chair angle freely by pressing the RASE/RECLINE key to enjoy
more ideal massage, no matter whether the massage machine is running or not.
Press button once to adjust the backrest and footrest to a comfort position.
Press the button again to confirm the position.
5/6. Recline/Rise
When plugging in, the massage chair enters into ready state.At the moment you can
adjust the footrest angle freely by pressing the RASE/RECLINE key to enjoy more
ideal massage, no matter whether the massage machine is running or not.
Press button once to adjust the footrest to a comfort position.
Press the button again to confirm the position.
These two keys are used to adjust footrest angle with intelligent electromotion for
achieving more ideal and comfortable massage angle.
The footrest will move from 5 to 90 degree when pressing RASE/RECLINE key until
to your ideal angle and then undo.
The massage chair will keep all massage function when doing the adjustment.

15
AUTO PROGRAM
Six pre-programmed massage session are activated by pressing the following
buttons: REJUVENATE, REFRESH, DESTRESS, SMART, SHIATSU,AUTOAIR.
Manual Back Massage Programming
7. KNEADING & TAPPING
Kneading & Tapping Start/Stop Control Button
Press this key once to activate the kneading & tapping function for symmetrical and
vigorous massage action on the body’s reflex points.
Press this key again to exit this function.
Press the FAST/SLOW button to adjust the speed of massage while the Shiatsu
function is activated.
8. KNEADING
Kneading Function Start/Stop Control Button
Press this key once to activate the kneading function for vigorous kneading action on
the body's reflex points.
Press this key again to exit this function.
Press the FAST/SLOW button to adjust the speed of massage while the kneading
function is activated.
9. TAPPING
Tapping Function Start/Stop Control Button
Press this key once to activate the tapping function for vigorous tapping action on the
body's reflex points.
Press this key again to exit this function.
Press the WIDTH button and Speed button to adjust the TAPPING width and speed
of massage while the tapping function is activated.
10. ROLLING
Rolling Function Start/Stop Control Button
Press this key once to activate the rolling function for vigorous rolling action on the
body's reflex points.
Press this key again to exit this function.
Press the WIDTH button to adjust the width of massage while the Rolling function is
activated.

16
11/12. FAST/SLOW
Speed Adjustment Buttons
Press these two keys to activate the intensity adjustment function on the relative
massage action to control the massage intensity of current mode.
Press these two keys to switch from fast to slow or slow to fast with circular
adjustment.
13/14/15. WIDTH
Width Adjustment Buttons
Under the mode of Tapping and Rolling, press this key once to switch massage width
within Wide/Medium/Narrow to satisfy different users' demands. But it is invalid
under Kneading mode.
16/17. UP/DOWN
Position Adjustment Button fot Spot or Partial Massage
These keys are used for adjusting backrest massage position to achieve spot
massage.
Press UP and DOWN keys continuously until the massage wheel rolls to ideal
position and then undo the key to get the spot massage function.
Press ROLLING key to eliminate spot function.
18. PARTIAL
Partial Back Massage
Backrest massage Position Selection key is your convenient choice for backrest spot
massage.
Press this key to massage within ±8cm up-and-down under current massage mode.
Press this key again to exit this function.
19. SPOT
Spot Back Massage
The backrest spot massage choice key is your convenient choice for backrest spot
massage.
Press this key to massage under current massage mode.
Press this key again to exit this function.

17
20. VIBRATE (SEAT)
Seat Vibration Control Button
Press this key once to activate seat vibrating massage function for comfortable
vibrating massage enjoyment.
Press this key again to exit the function.
21. KNEAD (CALVES)
Calves kneading Function Control Button
Press this key once to activate calves kneading massage function for comfortable
kneading massage enjoyment.
Press this key again to exit the function.
Setting Air Squeeze
22. AUTO 1
Air Squeeze Control Button— Auto Program 1
Press this key to activate the seat and calves auto air squeezing program No.1 for
comfortable waving massage. Press this key again to exit the function.
23. AUTO 2
Air Squeeze Control Button— Auto Program 2
Press this key to activate the seat and calves auto air squeezing program No.2 for
comfortable squeezing massage. Press this key again to exit the function.
24. INTENSITY(Seat and Calved)
Press this key once to increase the intensity of seat & calves air massage
Press again to circulate from weak to strong.
Press this key once to decrease the intensity of seat & calves air massage
Press again to circulate from strong to weak.

10
* Do not use water and other cleaning detergents on the massage chair.
* Do not stack, stab, slit or harshly pull on the surface of the massage chair.
* Gently press the buttons during operation and avoid hitting the buttons with
hard objects.
* Pull out the power supply plug after each use.
* Do not use the massage chair for more than 30 minutes at a time.
Warnings
18
Troubleshooting & Product Maintenance
09
This massage chair is controlled by a microcomputer and is susceptible to power
surges of +10 to -10%.
The following situations may display in the event of a power surge:
1. Make sure the chair is plugged
into a working outlet.
2. Turn the power OFF and then ON
again.
1. Check to see that the plug is well
connected and working.
2. Make sure that the massage chair
switch is turned to the “I” position.
The massage chair is connected
to the power supply but is not
functioning.
The remote control works, but the
massage chair is not functioning. The massage chair may have overheated due to prolonged use.
Turn off the power and allow the chair
to cool for 30-50 minutes.
Both the remote control and the
massage chair are not functioning.
Situation Solution