
Catalog Number
SS-STRIP-*-**-***
57 Alexander Street, Yonkers, NY 10701 Tel: 914.476.7987, 212.569.7777; 800.4.ALTMAN Fax:914.963.7304
Visit our website at www.altmanltg.com © 2010 Altman Stage lighting Company, Inc.
6’ Linear LED Wash Fixture
Part Number: SS-STRIP-*-**-**
Model Light Engines**
SS-STRIP-*-**-*** RGBA
RGBA+W
RGBA+W+W
Color***
BK (Black)
WH (White)
SL (Silver)
W
RGBA
RGBA+W
RGBA
W
Wattage*
600
400
200
Specifications:
General:
x 200/400/600w Color Mixing and/or White LED
Fixture
x Available in 6’ lengths with power & data pass thru
x ETL pending for indoor dry location use
Physical:
x Rugged extruded and sheet aluminum construction
x Corrosion-resistant materials and hardware
x Dual access slots per compartment for spread
lenses & color media. Two access doors per slot
for tools free accessory access from either side of
luminaire
x Available in Black, White or Silver TGIC polyester,
electrostatic application. Custom colors available
x Approx. 48lbs. (21.78 kg)
x Convection cooled without the use of fans.
Requires free air flow around fixture.
Electrical:
x Multi-Voltage; 120-240 volt AC 50/60 Hz universal
power input
x Neutrik® PowerCon™ input connector
x 3m power lead provided with bare ends. Factory
installed connector options available.
x Requires power from a constant or switched
source
LED:
x 50,000 hour LED life
x Up to (12) Light Engines per fixture utilizing Luxeon
Rebel LED’s– 50 Watts Max per light Engine at full
RGBA or 3000° K White.
Color:
x Color Mixing Light Engines utilize a 4-color mixing
system (Red, Green, Blue, and Amber)
x White Light Engines utilize 3000° K high-color
rendering LEDs for crisp, clean light that blends
seamlessly with conventional sources.
x White light engines can be used for basic
illumination as well as tinting the output of the color
mixing engines. White light engines can also be
used with conventional color media.
Optical:
x Approximately 20° beam spread per light engine.
x Spread lenses install on a per compartment basis
to change the beam spread of that compartment.
x Lenses are available as an additional accessory
Control:
x DMX-512A and RDM via 5-Pin XLR male & female
receptacles.
x 8 or 16bit resolution selectable per light engine per
fixture
x Preset configurations for cell by cell control, whole
fixture control, 3-circuit strip light emulation, & 4-
circuit strip light emulation.
x Virtual master channel available for all cells and
modes
x Refer to operations manual for channels required
for each configuration.
Please refer to Configuration Options on the next page
for details of available wattage & light engine configurations.
Accessories Supplied with Spectra Strip
SS-ST-FT Black Floor Trunions, pair
SC-36-BK Safety Cable with Spring Clip
SS-ST-CF Color Frame (one frame per light engine
installed)
Additional Accessories
XLR-5-5 5’ 5 Pin DMX Extension Cable
XLR-5-10 10’ 5-Pin XLR Extension Cable
XLR-5-25 25’ 5-Pin XLR Extension Cable
99-DMX-TERM In line 5-Pin XLR 120ohm terminator
61-0265 RAD Remote Fixture Addressing Device
SS-ST-LSL Spectra Strip Linear Spread Lens
508 Hanging Arm & Clamp, pair
SS-ST-BL Spectra Strip Frosted Blending Lens
SS-ST-YOKE 6’ Yoke for Spectra Strip with (2) 510-HD
Pipe Clamps