Altronix ALTV2416300M User manual

Rev. 021804
ALTV2416 Series
CCTV Power Supplies
Installation Guide
Models Include:
•ALTV2416 •ALTV2416CB
- 24VAC @ 8 amp (200VA). - 24VAC @ 8 amp (200VA).
or 28VAC @ 7 amp. or 28VAC @ 7 amp.
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
•ALTV2416350 •ALTV2416350CB
- 24VAC @ 14 amp (350VA) - 24VAC @ 14 amp (350VA)
or 28VAC @ 12.5 amp (350VA). or 28VAC @ 12.5 amp (350VA).
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
•ALTV2416300M •ALTV2416300CBM
- 24VAC @ 12.5 amp (300VA) - 24VAC @ 12.5 amp (300VA)
or 28VAC @ 10 amp (300VA). or 28VAC @ 10 amp (300VA).
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
•ALTV2416600 •ALTV2416600CB
- 24VAC @ 28 amp (700VA) - 24VAC @ 28 amp (700VA)
or 28VAC @ 25 amp (700VA). or 28VAC @ 25 amp (700VA).
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.

Overview:
These Altronix CCTV Power Supplies provide 24VAC/28VAC distributed via sixteen (16) fuse or PTC protected outputs
for powering CCTV Cameras, heaters and other video accessories.
Sixteen (16) Output ALTV2416 Reference Chart:
ALTV2416 24VAC 8 amp 16 - x 3.5 amp 5 amp/250V 1.9 amp
28VAC 7 amp
ALTV2416CB 24VAC 8 amp 16 x - 2.5 amp 5 amp/250V 1.9 amp
28VAC 7 amp
ALTV2416350 24VAC 14 amp 16 - x 3.5 amp 15amp/32V 2.7 amp
28VAC 12.5 amp
ALTV2416350CB 24VAC 14 amp 16 x - 2.5 amp 15amp/32V 2.7 amp
28VAC 12.5 amp
ALTV2416300M 24VAC 12.5 amp 16 - x 3.5 amp - 2.7 amp
28VAC 10 amp
ALTV2416300CBM 24VAC 12.5 amp 16 x - 2.5 amp - 2.7 amp
28VAC 10 amp
ALTV2416600 24VAC 28 amp 16 - x 3.5 amp 15amp/32V 5.4 amp
28VAC 25 amp
ALTV2416600CB 24VAC 28 amp 16 x - 2.5 amp 15amp/32V 5.4 amp
28VAC 25 amp
Specifications:
- 2 -
Altronix
Model Number
Output Current
(max per output)
Total Output Current
(Power)
Output Voltage
115VAC
50/60Hz Input
Current
PTC Protected
Outputs
Fuse Protected
Outputs
Number of
Outputs
Main Fuse Ratings
on Board
• Surge suppression.
• AC power LED indicator.
• Power ON/OFF switch.
• Unit maintains camera synchronization.
• Ease of installation saves time & eliminates costly labor.
•Spare fuses included (on fuse protected models).
Enclosure Dimensions:
ALTV2416 and ALTV2416CB: 8.5"H x 7.5"W x 3.5"D
ALTV2416300M and ALTV2416300CBM:
8.5"H x 7.5"W x 3.75"D
ALTV2416350, ALTV2416350CB, ALTV2416600
and ALTV2416600CB: 13"H x 13.5"W x 3.25"D
Two (2)
Two (2)
Two (2)
Two (2)

- 3 -- 3 -
Installation Instructions:
1. Mount unit in desired location.
2. Slide switch on PD board to OFF position for models ALTV2416 and ALTV2416CB (Fig. 1, pg. 4).
Turn OFF main switch on all other models (Figs. 2-4, pgs. 4-6).
3. All units are factory set for 24VAC operation.
For 28VAC operation, adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].
4. Connect AC power to the black and white flying lead of the transformer(s) (Figs. 1-4, pgs. 4-6).
Use 18 AWG or larger for all power connections.
5. Measure output voltage before connecting devices. This helps avoid potential damage.
Terminals marked [1P - 8P] are positive of the same polarity.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
6. Connect devices to terminals marked [1P - 1N through 8P - 8N] on PD8/PD8CB board (Fig. 1, pgs. 4),
carefully observing polarity [1P - 1N through 16P - 16N] on PD16W board.
7. Slide switch on PD board to ON position for models ALTV2416, and ALTV2416CB (Fig. 1, pg. 4).
Turn main switch on all other models to the “RESET” (ON) position (Figs. 3-5, pgs. 5-6).
8. Green LED will illuminate when unit is powered.
9. Upon completion of wiring, secure enclosure door with screws (supplied).
Caution: Equipment to be installed / serviced by authorized / trained personnel only.
Shut branch circuit power before installing / servicing equipment.
WARNING:To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to all local codes
and in accordance with the National Electrical Code.
Terminal Identification:
PD8/PD8CB - Power Distribution Module
1P - 8P Positive AC output.
1N - 8N Negative AC output.

- 4 -
Fig. 1 - ALTV2416 • ALTV2416CB
115VAC input
50/60 Hz.
White
Lead
Black
Lead
115VAC input
50/60 Hz.
White
Lead
Black
Lead
XFMR
XFMR
Used on PTC Models
(example: ALTV2416CB)
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
SW1
ON OFF
MAIN FUSE
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
SW1
ON OFF
MAIN FUSE
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
D1
INPUT
R1
LED
SW1
ON OFF
MAIN FUSE
F1 F2 F3 F4 F5 F6 F7 F8
1 2 3 4 5 6 7 8
NPS NPS NPS
NP S NP S
24VAC Output
(Factory Set)
Black
Black
Yellow
Yellow
28VAC Output
24VAC or 28VAC fused output 1
(Follow same procedure using terminals
2P & N through 8P & N fused
outputs 2 through 8)
24VAC or 28VAC fused output 1
(Follow same procedure using terminals
2P & N through 8P & N fused
outputs 2 through 8)
Enclosure Door Back Panel of Enclosure
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
Black Lead
White Lead
115VAC input
50/60 Hz,
Power
Switch
Used on PTC Models
(example: ALTV2416350CB)
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
D1
INPUT
N P S
R1
LED
INPUT
N P S
R1
LED
MAIN FUSE MAIN FUSE
F1 F2 F3 F4 F5 F6 F7 F8
XFMR*
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
N P S
R1
LED
MAIN FUSE
NP S
NP S
24VAC Output
(Factory Set)
Black
Black
Yellow
Yellow
28VAC Output
24VAC or 28VAC
fused output 1
(Follow same procedure
using terminals
2P & N through 8P & N
fused outputs 2 through 8)
Fig. 2
ALTV2416350 • ALTV2416350CB
24VAC or 28VAC fused or PTC
protected outputs 1 through 8.
Terminal Blocks for Fig. 2
24VAC or 28VAC fused or PTC
protected outputs 1 through 8.
Terminal Blocks for Fig. 1

- 5 -
P
N
NPS
XFMR Input
PD16W
common
outputs
protected
outputs
12345678 9 10 11 12 13 14 15 16
PN
Used on PTC Models
(example: ALTV2416300CBM)
PTC’s
Transformer
underneath
power supply
board
Power
Switch
3.5A 250V
For continuous protection against risk of fire 
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678 9 10 11 12 13 14 15 16
PN
Fig. 3
ALTV2416300M • ALTV2416300CBM
24VAC or 28VAC
fused or PTC protected outputs
1 through 16.
Input:
24VAC or
28VAC
operation.
Terminal Blocks for Fig. 3

- 6 -
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
N P S
R1 LED
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
N P S
R1 LED
White
Lead
Power
Switch
XFMR*
Black
Lead
115VAC input,
50/60 Hz.
Used on PTC Models
(example: ALTV2416600CB)
XFMR*
N
P
FUSED POWER OUTPUTS
ALTRONIX CORP. MADE IN USA
BROOKLYN, NY 11220
D1
INPUT
R1
LED
MAIN FUSE MAIN FUSE
F1 F2 F3 F4 F5 F6 F7 F8
COMMON POWER OUTPUTS
MAIN FUSE
NPS
NPS
24VAC Output
(Factory Set)
Black
Black
Yellow
Yellow
28VAC Output
24VAC or 28VAC
fused output 1
(Follow same procedure
using terminals
2P & N through 8P & N
fused outputs 2 through 8)
Fig. 4
ALTV2416600 • ALTV2416600CB
24VAC or 28VAC fused or PTC
protected outputs 1 through 8.
Terminal Blocks for Fig. 4

- 7 -
Enclosure Dimensions for:
• ALTV2416
• ALTV2416CB
8.5"H x 7.5"W x 3.5"D
TOP ONLY
Enclosure Dimensions for:
• ALTV2416300M
• ALTV2416300CBM
8.5"H x 7.5"W x 3.75"D
0.50”
6.05”
7.25”
3.85”
1.25”
3.625”
6.825” 8.125”
1.25”
1.00”
1.00”
1.00”
1.00”
1.00”
1.00”
5.25”
1.25”
7.25”
3.85”
3.85”
1.75”
Access for Linecord

- 8 -
Altronix Corp.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
web site: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
II1ALTV2416Series B09E MEMBER
Altronix is not responsible for any typographical errors.
00
0
.81"
0
1.1875"
1.1875"
3.25"
3.25"
0 1.1875" 3.25".75" 1.5" 6.25" 11"
1.4"
6.5"
5.5"
1.4"
11.66"
12.1"
13"
12.5"
11.75"
TOP ONLY
Enclosure Dimensions for:
• ALTV2416350
• ALTV2416350CB
• ALTV2416600
• ALTV2416600CB
13"H x 13.5"W x 3.5"D