AMA Juliet User manual

User Manual v. 2.1
1

2
※ This product is a medical device.
Please read the manual carefully in order to use this product safely.
1. Precautions ………………………………………………… 3
2. Contents …………………………………………………… 4
3. Main Body …………………………………………………… 5
4. Needle, Massage Tip ……………………………………… 6
5. Operation Process ………………………………………… 7
6. Connecting Needle Tip …………………………………… 8
7. Adjusting Needle Depth ………………………………… 9
8. Disconnecting Needle Tip ………………………………… 10
9. Storage & Maintenance ………………………………… 11
10. Contact Us ………………………………………………… 12
Table of Contents

3
1. Read the manual carefully and be acquainted with the operation process before use.
2. Check the contents of the product.
3. Do not disassemble or modify the device arbitrarily.
4. Do not use this device for purposes other than specified.
5. Do not touch the power with wet hands.
6. Wash hands and wear sterilized gloves before performing operation.
7. Check the connections (main device, tip, power cord) before use.
8. Needle tips are single use medical consumables. Do not use needle tips more than once.
9. Check the expiration date of the needle tip before use.
10. Check the packaging before use. Do not use if the packaging is damaged.
11. Use original tips only.
12. Do not use on skin with dermatitis, activated acne, skin ailment, or allergy. Do not use on
young children or pregnant woman.
13. When skin rashes or allergies occur during the treatment, stop the treatment
immediately and consult with doctor.
14. Total treatment time should not exceed 10 minutes including massage session.
(recommended needling session = 2~3 minutes)
1. Precautions
※ The needle tips are single-use medical consumables and
must be discarded after use.

4
1. Juliet Main Body x 1
2. MTS Needle Tip x 2
3. Scalp Massage Tip x 1
4. Power Adapter x 1
5. Aluminum Case x 1
2. Contents
1
2
3
4
5

5
How to operate:
1. Press the power button to turn on the device.
2. Repeat pressing the power button briefly to increase or decrease speed. (1~4)
3. Press the power button for 3 seconds to turn off .
3. Main Body
Power On/Off &
Speed Control
Power
connection
Head
(Motor Control)
Needle Depth
Control Handle
Tip
Attachment

6
1. Needle tips are single-use medical consumable.
Do not use the needle tip more than once.
2. Reusing the needle tip causes infection and
scratching of the skin.
4. Needle Tip & Massage Tip
1. Massage tips can be reused after properly sanitized
and sterilized with ethanol alcohol(70%).
2. Most effective when used after scalp MTS session.
3. Massage tips are available to purchase additionally.

7
5. Operation Process
Wash hands and wear
sterilized gloves.
Treatment area should
be cleaned as well.
Prepare sterilized
needle tip.
Connect the needle tip
to the main body.
(Refer pg.8)
Select appropriate
speed (1~4) for the
treatment area.
Press the power
button to turn device
on.
Connect the main
body to the power
cable.
Operation
(Total operation time may
not exceed 10 minutes
including massage session)
Discard needle tip
after use.
Sanitize and sterilize
the device with
ethanol alcohol(70%),
store in cool, dry place.
1 2 3
6 5 4
7 8 9

8
6. Connecting Needle Tip
Prepare sterilized needle tip. Cut and
open the insert part side of the package.
Insert the needle tip to the main body.
Hold the sides of the needle tip, slightly
rotate counter clock wise to completely
fix the tip to the device.
Ready to use.
1 2
3 4
Notice:
•Connect or disconnect needle tip when power cable is unplugged.
•Do not touch the needles directly with hands to prevent any possible infection.
•Discard the needle tip after use.
Insertion part

9
7. Adjusting Needle Depth
Gently rotate the handle
clock wise to adjust needle
depth.
Do not rotate the handle by
force as it may cause
damage on the device.
(Adjustable needle depth
= 0.25~2.00mm )
Minimum needle depth = 0.25mm
(0 Rotation – initial setup)
Maximum needle depth = 2.25mm
(2 Rotations)
Tip
Attachment
Part
Rotation 0 rotation ½ rotation 1 rotation 1 ½ rotations 2 rotations
Overhang 2mm 1.5mm 1mm 0.5mm 0mm
Needle
Depth 0.25mm 0.75mm 1.25mm 1.75mm 2.25mm
Initial Setup
(0 Rotation)
:From the top view, website
address & the middle line of
the head part are horizontally
centered.

10
8. Disconnecting Needle Tip
Unplug the power cable. Hold the sides
of the needle tip, slightly rotate clock
wise.
Remove the needle tip from the device
and discard.
1 2
2
Notice:
•Connect or disconnect needle tip when power cable is unplugged.
•Do not touch the needles directly with hands to prevent any possible infection.
•Discard the needle tip after use.