Amana Bottom Freezer Refrigerator User manual

Bottom Freezer
Refrigerator
Owner's Manual
Keep these instructions for future reference.Be sure this
manualstays with refrigerator.
English.....................................................................2
Español.................................................................. 24
Français ................................................................. 48
As an Energy Star®Partner, Amana®has
determined that this product* meets the
Energy Star®guidelines for energy
efficiency.
* Energy Star® applies to some models. Qualifying models are
designated with the Energy Star® logo located on the product.

2
Contents
PartsandAccesories.................................................................... 2
ElectricalRequirements ................................................................ 2
ModelIdentification........................................................................ 2
Service ......................................................................................... 2
AsureTM ExtendedService Plan ..................................................... 3
ProperDisposal ofYourRefrigerator.............................................. 3
SpaceRequirements..................................................................... 3
Instructions for SwingDoor Models ............................................... 4
To RemoveDoorsand Hinges .................................................. 4
To Reverse Doors..................................................................... 4
To ReplaceDoors ..................................................................... 5
Instructionsfor PulloutFreezer DrawerModels............................. 6
To RemoveRefrigerator Doorand Hinges................................. 6
To Reverse Refrigerator Door ................................................... 6
To ReplaceRefrigeratorDoor.................................................... 7
To Removeand ReplaceFreezer PulloutDrawer ...................... 7
ConnectIce MakerWater SupplyLine(somemodels). ................. 9
LevelingRefrigerator ....................................................................10
SwingDoor Models ..................................................................10
PulloutFreezer DrawerModels ................................................10
InstallationChecklist ....................................................................11
Controls .......................................................................................12
Fresh Foodand Freezer Controls ............................................12
SettingControls........................................................................12
Fresh FoodFeatures ...................................................................12
FreshFoodShelves.................................................................12
BeverageOrganizer.................................................................12
AdjustableDeli DrawerTM (some models)..................................13
Garden FreshTMCrisper ...........................................................13
ChillerFreshTM System(somemodels) ....................................13
StorageRack (some models)...................................................14
CoveredStorage Bucket (some models)..................................14
DairyCenter (some models) ....................................................14
Door Buckets ...........................................................................15
TallPackage Retainer ..............................................................15
DoorShelves ...........................................................................15
AdjustableDivider (somemodels) ............................................15
BottleHolder ............................................................................15
FreezerFeatures.........................................................................16
Frost-FreeSystem...................................................................16
AutomaticIce Maker (some models) ........................................16
IceService Rack (some models) .............................................16
SlideoutShelf (somemodels) ...................................................16
VerticalShelf Divider (somemodels) ........................................16
FixedWire Shelf (somemodels)...............................................16
WireBasket (some models) .....................................................17
IceBin (some models) .............................................................17
VerticalBasketDivider .............................................................17
Tilt-OutBin (some models) .......................................................17
PulloutDrawer Baskets (some models)....................................17
IceShield (some models) .........................................................17
Careand Cleaning .......................................................................18
GeneralCleaning .....................................................................18
StainlessSteelCleaning ...........................................................18
Adhesives ................................................................................18
Door Gaskets ..........................................................................18
CondenserCoils ......................................................................18
GlassShelves..........................................................................18
OdorRemoval..........................................................................18
LightBulbReplacement ............................................................18
VacationTips................................................................................19
EnergyTips..................................................................................19
NormalOperating Sounds ............................................................20
BeforeCalling For Service............................................................21
Warranty......................................................................................23
Español........................................................................................24
Français ......................................................................................48
Note: Translationmaysometimes cause variationsinmeaning.Inall
caseswhere meaning varies, the most accurate meaning willbethe
Englishversion of this document.
!
Recognize this symbol as a safety precaution.
Model Identification
Thank you for purchasing this Amana®refrigerator. Please
read this Owner's Manual thoroughly. This manual
provides proper maintenance information. Any questions,
call the Consumer Affairs Department at 1-800-843-0304
inside U.S.A. and 1-319-622-5511 outside the U.S.A., or
contact us on the internet at www.amana.com.
Complete registration card and promptly return. If
registration card is missing, call the Consumer Affairs
Department.
When contacting Amana , provide product information.
Product information is on the serial plate, located on the
ceiling of fresh food section. Record the following
information.
Model Number: _________________________
Manufacturing Number: _________________________
S/N or Serial Number: _________________________
Date of Purchase: _________________________
Dealer's name and address: ________________________
________________________________________________
Service
Keep a copy of sales receipt for future reference or in
case warranty service is required. Any questions or to
locate an authorized servicer, call 1-800-NAT-LSVC
(1-800-628-5782) inside U.S.A. 319-622-5511 outside
U.S.A. Warranty service must be performed by an
authorized servicer. Amana also recommends contacting
an authorized servicer if service is required after warranty
expires.
Parts and Accessories
Purchase replacement parts and additional accessories
(e.g. refrigerator shelves) over the phone. To order
accessories for your product, call 1-800-843-0304 inside
U.S.A. or 319-622-5511 outside U.S.A., or contact us on
the internet at www.amana.com.
Electrical Requirements
WARNING
!
To avoid electrical shock which can cause severe
personal injury or death do not cut or remove the round
grounding prong from the plug. Refrigerator must be
grounded at all times. Do not remove warning tag from
power cord.
Do not use a two-prong adapter. Do not use an
extension cord.
This refrigerator is equipped with a three-prong
(grounding) plug for protection against possible
shock hazards. If a two-prong wall receptacle
is encountered, contact a qualified
electrician and have the two-prong wall
receptacle replaced with a properly grounded
three-prong wall receptacle in accordance
with the National Electrical Code.
Refrigerator is designed to operate on a separate 103 to
126 volt, 15 amp., 60 cycle line.

3
Space Requirements
WARNING
!
Keep flammable materials and vapors, such as
gasoline, away from refrigerator. Failure to do so can
result in death, explosion, fire, or burns.
•To ensure proper ventilation for your refrigerator, allow
for a 1"(2.5 cm) for 33" wide models, or ½"(1.3 cm) for
30" wide models, at the top of your refrigerator.
• If your refrigerator has an ice maker, make sure you
leave some extra space at the back to allow for the
water line connection. The refrigerator can be flush with
the back wall if you do not have an ice maker installed.
• If you are installing your refrigerator next to a fixed wall,
leave 2 ½" minimum on hinge side (depending on your
model) to allow for the door to swing open 90°.
NOTE: Do not install the refrigerator near an oven,
radiator, or other heat source. Do not install the
refrigerator in a location where the temperature will fall
below 55°F (13° C).
Proper Disposal ofYour Refrigerator
IMPORTANT: Child entrapment and suffocation
are not problems of the past. Junked or abandoned
refrigerators are still dangerous--
even if they will sit for "just a few days." If you
discard an old refrigerator, please follow the
instructions below to help prevent accidents.
BEFOREYOU THROW AWAYYOUR OLD
REFRIGERATOR OR FREEZER:
• Take off the doors.
• Leave the shelves in place so that children may
not easily climb inside.
Asure™ Extended Service Plan
Amana offers long-term service protection for this new
refrigerator. Asure™ Extended Service Plan is specially
designed to supplement Amana’s strong warranty. This
plan covers functional parts, labor, and travel charges.
Call 1-800-528-2682, or contact us on the internet at
www.amana.com, for information.
DANGER
!

4
IMPORTANT:
• Save all screws for reuse.
• For plug removal requiring use of flat blade screwdriver
or putty knife, blade of tool must be covered with
masking tape to avoid damage to refrigerator
finish. For plugs using a screwdriver or nut driver style
head, use appropriate tool to avoid damage to plugs.
To Remove Doors and Hinges
Some installations may require door and hinge removal to
transport unit to final location.
WARNING
!
To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before removing doors. After replacing
doors, connect power.
1. Remove top hinge cover
(A) . Top hinge cover snaps
off. While supporting refrigerator door, remove top
hinge
(B) and shim (C) using 5/16" hex nut driver to
remove screws
(D) .
A
C
B
D
2. Lift refrigerator door off center hinge.
3. While supporting freezer door, remove center hinge pin
(A) from center hinge bracket (B) with 5/16" hex nut
driver. Remove and retain all round washer shims
(C–
some models)
.
B
C
A
4. Remove freezer door by lifting door off bottom hinge.
Instructions for Swing Door Models 5. Remove center hinge bracket
(A) and shim (B) by
removing screws
(C) using Phillips screwdriver.
BA
C
6. Remove toe grille (A) and bottom hinge cover (B) . Both
snap off.
7. Remove bottom hinge
and shim (C) with 3/8" hex nut
driver. Remove hinge pin
(D) . Remove and retain all
round washer shims
(E) , if present.
B
A
D
C
E
To Reverse Doors
Some installations may require door reversal to achieve
full swing door. To reverse swing door direction perfrom
the following steps.
Service Notice: Contour Door Models Only
Only a qualified servicer can reverse this door. To have
doors reversed, please call 1-800-843-0304. There is a fee
for this service.
For Non-Contour Door Models
1. Complete all directions in section entitled
To Remove
Doors
.
2. Peel off positive positioning shim from top of unit
(A) .
NOTE: Keep adhesive surface of shim free of dirt and
dust until ready to replace. Soiling of adhesive
surface will prevent proper reinstallation.
A
3. Transfer three cabinet plugs from top corner of
cabinet to holes left from top hinge removal.
4. Transfer three 5/16" hex head screws opposite center
hinge area to the holes left by center hinge removal.
Proper installation will ensure this
refrigerator operates most efficiently.
Amana cannot be held responsible for
improper installation.
Service Notice:
Contour Door Models Only
Only a qualified servicer can reverse
this door. To have door reversed, please
call 1-800-843-0304. There is a fee for
this service.
Tools Required
Putty knife 5/16" hex nut driver
Masking tape ¼" hex nut driver
3/8" hex nut driver Phillips screwdriver

5
Replace door stop
1. Mount door stop opposite handle side on underside of
door.
To Replace Doors
1. Replace bottom hinge and shims with 3/8" hex nut
screws from hinge removal.
2. Replace bottom hinge pin
(A) in hinge bracket
hole
(B) toward outside of cabinet. Replace all washer
shims
(C–some models) .
A
B
C
3. Replace center hinge and shims with Phillips screws
from hinge removal.
4. Place freezer door on bottom hinge pin.
5. Replace center hinge pin with 5/16" hex nut driver.
Make sure fit is tight. Replace all washer shims
(some models) .
6. Assemble top hinge, hinge shim, and positioning
shim together. Attach loosely to opposite side of
cabinet to allow for door clearance.
7. Place refrigerator door on center hinge. Tighten down
top hinge to securely hold door.
8. Use a dime at top to space door 11/16"(18 mm)from
cabinet. Handle side of door should be approximately
1/8" (3 mm) higher than hinge side. Door will become
level when it is loaded with food.
1/8"
(3 mm)
11/16"
(18 mm)
9. Replace hinge cover.
Note: If automatic ice maker water supply is
required, proceed to
Connect Ice Maker Water
Supply Line
. If not, proceed to section entitled
Leveling Refrigerator .
Remove Door Stop
1. Unscrew 2 Phillips screws and remove door stop (A)
from refrigerator and freezer door (B) . Retain all screws
for door stop replacement.
AB
Reverse Handle (front-mounted design)
1. Remove handle screw from handle trim
(A) . Pry up
edge of handle trim
(A & B) using a putty knife blade
wrapped in masking tape. Remove handle
(C) from
door by removing 1 remaining mounting screw at each
end of handle
(D) .
2. Remove plugs from hinge side of door
(E) . Replace
plugs in empty mounting holes.
3. Mount refrigerator handle
(C) on opposite side of door
using mounting screws removed in previous step.
4. Snap handle trim
(A & B) into place and replace screw
at top of handle.
A
B
C
D
Reverse Freezer Handle
1. Locate two notches on back of freezer handle
(A) .
Insert putty knife blade wrapped in masking tape. Pry
up back edge of handle cap
(B) and remove from
handle.
2. Remove handle from door by removing screws
(C) .
B
C
A
3. Transfer plugs (D) from opposite side of freezer door to
empty mounting holes.
D

6
IMPORTANT:
• Save all screws for reuse.
• For plug removal requiring use of flat blade screwdriver
or putty knife, blade of tool must be covered with
masking tape to avoid damage to refrigerator
finish. For plugs using a screwdriver or nut driver style
head, use appropriate tool to avoid damage to plugs.
To Remove Refrigerator Door and Hinges
Some installations may require door removal to transport
unit to final location.
WARNING
!
To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before removing doors. After replacing
doors, connect power.
1. Remove top hinge cover
(A) . Top hinge cover snaps
off. While supporting refrigerator door, remove top
hinge
(B) and shim (C) using 5/16" hex nut driver to
remove screws (D) .
A
C
B
D
2. Lift refrigerator door off center hinge.
3. Remove center hinge pin
(A) from center hinge bracket
(B) with 5/16" hex nut driver. Remove and retain all
round washer shims
(C–some models) .
B
C
A
Instructions for Pullout Freezer
Drawer Models
Proper installation will ensure this
refrigerator operates most efficiently.
Amana cannot be held responsible for
improper installation.
Tools Required
T-15 Torx™ driver Putty knife
3/8" hex nut driver Masking tape
5/16" hex nut driver Phillips screwdriver
4. Remove center hinge bracket
(A) and shim (B) by
removing screws
(C) using Phillips screwdriver.
BA
C
Remove Door Stop
1. Unscrew 2 Phillips screws and remove door stop
(A)
from refrigerator door (B) . Retain all screws for door
stop replacement.
AB
Reverse Handle
1. Remove door plugs from edge of door. Keep for later
replacement.
To Reverse Refrigerator Door
Some installations may require door reversal to achieve
full swing door. To reverse swing door direction perfrom
the following steps.
1. Complete all directions in section entitled To Remove
Doors
.
2. Peel off positive positioning shim from top of unit
(A) .
NOTE: Keep adhesive surface of shim free of dirt and
dust until ready to replace. Soiling of adhesive
surface will prevent proper reinstallation.
A
3. Transfer three cabinet plugs from top corner of
cabinet to holes left from top hinge removal.
4. Transfer three 5/16" hex head screws opposite center
hinge area to the holes left by center hinge removal.

7
To Remove and Replace Freezer Pullout
Drawer and Stabilizing Feet
To Remove Freezer Drawer
1. Open freezer drawer to full extension.
2. Empty all articles out of baskets.
3. Slide top wire basket out to full extension and lift out
to remove.
4. Remove bottom basket (A) by lifting basket from rail
guides
(B) .
B
A
5. Remove Phillips screw from each side of drawer rail
assembly. DO NOT remove hex head screws from rail
assembly.
6. Lift front handle of freezer drawer to disengage drawer
rail hooks from interior rail assembly. Lift drawer
assembly out to remove.
2. Remove Torx-head screws to release handle from door.
Retain screws for replacement.
3. Mount handle on opposite side of door using screws
from removal.
4. Place plugs in holes on door edge opposite handle.
Replace door stop
1. Mount door stop opposite handle side on underside of
door.
To Replace Refrigerator Door
1. Replace center hinge and shims with Phillips screws
from hinge removal.
2. Replace center hinge pin with 5/16" hex nut driver.
Make sure fit is tight. Replace all washer shims
(some models) .
3. Assemble top hinge, hinge shim, and positioning
shim together. Attach loosely to opposite side of
cabinet to allow for door clearance.
4. Place refrigerator door on center hinge.Tighten down
top hinge to securely hold door.
5. Use a dime at top to space door 11/16"(18 mm)from
cabinet. Handle side of door should be approximately
1/8" (3 mm) higher than hinge side. Door will become
level when it is loaded with food.
11/16"
(18 mm)
1/8"
(3 mm)
6. Replace hinge cover.
Note: If automatic ice maker water supply is required,
proceed to
Connect Ice Maker Water Supply Line . If not,
proceed to section entitled
Leveling Refrigerator .

8
Optional Instructions If AddressingTransport
ClearnaceIssues
1. Remove both stabilizing leg covers (A) and toe grille
(B) . Both snap off.
2. Remove both stabilizing brackets
(C) with 3/8" hex nut
driver.
A
B
C
To Replace Freezer Drawer
IMPORTANT: Two individuals may be required to complete
this procedure.
1. Extend both interior rail assemblies to full length on
each side of cabinet.
2. Locatenotches (A) in both interior railextensions.
A
3. Align tabs on outside edge of drawer rail assemblies
(B) with notches in both rail extensions (C) .
B
C
4. Insert hook tab (D) into notch (E) at 45° angle. Insert
tab
(F) into notch (G) by lowering handle end of
assembly.
GE
D
F
5. Replace Phillips screws on both rail extensions.
6. Replace bottom basket (H) by placing basket into rail
guides
(I) .
I
H
7. Slide top basket into upper compartment.
Optional Instructions If AddressingTransport
ClearanceIssues
1. Replace both stabilizing brackets (A) with 3/8" hex nut
driver.
2. Replace toe grille (B) and both stabilizing leg
covers (C) . See markings on inside of toe grille to
insureproper placement.
•Snap top portion into place first. Press down on
lower part of grille until bottom portion snaps into
place.
ABC

9
Connect Ice MakerWater Supply Line
(some models)
DANGER
!
To avoid electrical shock which can cause severe
personal injury or death. Disconnect power to
refrigerator before connecting water supply.
CAUTION
!
Observe the following to avoid property damage:
• Raise stabilizing leg before moving unit.
• Make sure water pressure to water valve is
between 20 and 100 pounds per square inch.
• Tighten adapter fitting and nuts with pliers and
wrenches. Do not overtighten.
• Check for water leaks and correct if necessary
before returning refrigerator to normal location. After
24 hours check again for leaks.
Important
• Before connecting water supply, contact a plumber to
connect coper tubing to household plumbing in
compliance with local codes and ordinances.
•DO NOT use piercing type or 3/16" saddle valves!
Both reduce water flow, become clogged with time and
in addition, may cause leaks if repair is attempted. The
correct type–a shut-off valve–requires a ¼" hole to be
drilled in the water supply pipe before valve attachment.
• Do not install copper tubing in area where temperatures
drop below 32°F (0°C).
Materials Required
¼" O.D. (6 mm) flexible copper tubing
½" open end wrench
Length of copper tubing must reach from water supply
connection to water valve inlet port on back of
refrigerator, plus additional 8 ft. (2 m) of tubing for a
service loop. A service loop will allow refrigerator to be
pulled away from the wall without disconnecting tubing.
Procedure
1. Remove plastic cap
(A) from water valve inlet port (B) .
A
B
2. Place brass nut (A) and brass sleeve (B) on copper
tubing
(C) (Brass nut and sleeve are found in your
literature packet.). Insert copper tubing into water
valve inlet port
(D) . Connect brass nut on copper
tubing to water valve inlet port. Make sure copper
tubing is secure by pulling on copper tubing.
3. Turn on water supply to refrigerator and check for
leaks. Correct any leaks at connection. Be careful not
to overtighten connection.
4. Create a service loop using extreme care to avoid
kinks. Secure copper tubing to refrigerator cabinet
with a "P" clamp
(E) . It is important to secure copper
tubing to refrigerator to avoid leaks when pushing
refrigerator back into opening.
A
B
D
C
E
5. Proceed to Leveling Refrigerator for final refrigerator
placement.

10
Leveling Refrigerator
Swing Door Models
CAUTION
!
Protect soft vinyl or other flooring with cardboard, rugs
orother protectivematerial to avoidproperty damage.
Ifyour refrigerator requires anicemaker water supply
connection, proceed to Connectice makerwater supply
sectionbeforelevelingyourrefrigerator.
1. Plugin power cord.
2. Moverefrigerator into final location.
3. Level refrigerator using a level placed on top of the
refrigerator.
• Removetoegrille (A) .Removebottomhinge
cover (B) .
• Turn rolleradjustment screws (C) to raiseor lower
refrigeratorcabinet.Frontof refrigerator mustbe
¼" (6 mm), or ½ bubble on your level, higher than
the back of your refrigerator.
• Make sure refrigerator cabinet is level from side to
side by adjusting left and right roller adjustment
screw (C) .
• Turn stabilizing leg (C) clockwise until firmly against
floor.
4. Replacetoegrille (A) andbottom hinge cover (B) . See
markings on inside of toe grille to insure proper
placement.
•Snap top portion into place first. Press down on
lower part of grille until bottom portion snaps into
place.
AB
C
D
5. Review Installation Checklist in Owner's Manual with
consumer.
Pullout Freezer Drawer Models
CAUTION
!
Protect soft vinyl or other flooring with cardboard, rugs
orother protectivematerial to avoidproperty damage.
Ifyour refrigerator requires anicemaker water supply
connection, proceed to Connectice makerwater supply
sectionbeforelevelingyourrefrigerator.
1. Plugin power cord.
2. Moverefrigerator into final location.
3. Level refrigerator using a level placed on top of the
refrigerator.
• Removestabilizing leg covers (A) .Remove toe
grille (B) .
• Turn roller adjustment screws (C) toraiseor lower
refrigeratorcabinet.Frontof refrigeratormustbe
¼" (6 mm), or ½ bubble on your level, higher than
the back of your refrigerator.
• Make sure refrigerator cabinet is level from side to
side by adjusting left and right roller adjustment
screw (C) .
• Turn both stabilizing legs (D) clockwise until firmly
againstfloor.
• Turn roller adjustment screws 2 to 3 times
counterclockwise, so that full weight of unit rests on
stabilizing legs.
4. Replacetoe grille (A) and both stabilizingleg
covers (B) . See markings on inside of toe grille to
insureproper placement.
•Snap top portion into place first. Press down on
lower part of grille until bottom portion snaps into
place.
A
B
D
C
5. Review Installation Checklist in Owner's Manual with
consumer.

11
Installation Checklist
This checklist is for personal records only.
Consumer Installer Doors
Handles are solidly attached to doors.
Handleside of door is1/8" (3 mm)higher thanhinge side.(Doorlowers when
loadedwithfood.)
Doorsseal completely to refrigeratorcabinet.
Leveling
Refrigerator is tilted 1/4"(6 mm) fromfront torear.
Toegrille isproperly attached torefrigerator.
Ice Maker
Watersupply to refrigeratoris turned on.
Waterleaks are not presentat connectionbetween household watersupply and
refrigerator.(After 24 hours, consumer should check connection for water leaks.)
Ice maker arm is in on position for ice production. (It may take up to 24 hours for
first harvest of ice.)
Product Literature
Owner'smanualisreviewed including the following information.
• productregistrationcard
• Fresh Foodand Deepfreeze® controls
• Humidity-controlledcrispers
• normaloperating sounds
Notes
Consumer's Signature DateInstaller's Company Name/Phone Number
Installer's Signature

12
Controls
This refrigerator is designed to operate at normal
household temperatures of 55° to 110°F (13° to 43°C).
Fresh Food and Freezer Controls
Fresh food control is located on upper rear wall of fresh
food section.
456
7
3
2
1
Freezer control is located on left front ceiling of freezer
section.
4Deepfreeze Control
Cold Coldest
Setting Controls
When freezer control is set to OFF, neither refrigerator nor
freezer sections will cool. Initially, set both controls to 4.
Wait 24 hours for refrigerator and freezer sections to
stabilize temperatures. After 24 hours, adjust controls,
one number at a time, as desired. One is warmest setting
and seven is coldest.
Set controls precisely using a household thermometer
with a temperature range between -5° to 50°F
(-21° to 10°C).
Put thermometer snugly between frozen packages in
freezer section. Wait 5–8 hours. If freezer temperature is
not 0° to 2°F (-17° to -16°C), adjust freezer control one
number at a time. Check again after 5–8 hours.
Put thermometer in a glass of water in middle of fresh
food section. Wait 5–8 hours. If fresh food temperature is
not 38° to 40°F (3° to 4°C), adjust fresh food control one
number at a time. Check again after 5–8 hours.
Fresh Food Features
Fresh Food Shelves
Shelves adjust to meet individual storage needs. Some
models feature Spillsaver TM Shelves and Easy Glide TM
shelves. Spillsaver TM Shelves hold minor spills for easier
cleaning.
CAUTION
!
Make sure shelf is secure before replacing items on
shelf to avoid property damage.
CAUTION
!
Handle tempered glass shelves carefully to avoid
personalinjury or property damage.Shelvesmay
break suddenly if nicked, scratched, or exposed to
suddentemperature change.
• Remove shelves (A) by lifting up shelf front,releasing
hooks (B) from metal track (C), then pulling out.
• Replace shelves by inserting hooks into metal track
and lowering front of shelf.
AC
B
Easy Glide™ shelves pull forward for easy access to
items in back.
Beverage Organizer (some models)
The beverage organizer slides out from underneath the
glide-out shelf. This may hold 12 cans or other desired
beverages.
• Before removing organizer, empty contents.
• Remove organizer
(A) by pulling organizer forward until
it catches on grooves
(B) in shelf rail (C) . Lift organizer
front and pull out.
• To replace, guide organizer
(A) into shelf rails (C) until
forward movement is stopped by groove
(B) . Lift
organizer front and ease organizer toward back of unit.
C
B
C
A

13
6. Replace crispers and shelves by performing steps
2 through 5 in reverse order.
Note: Be sure to hook shelf frame over notch on top
of support post when replacing shelf frames.
7. Slide crisper glass into place.
To remove or clean crisper drawer assembly for 30"
wide units:
1. Open refrigerator door as wide as possible and
remove crisper drawers.
CAUTION
!
Handle tempered glass shelves carefully to avoid
personal injury or property damage. Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
2. Remove glass crisper top by gently pushing up from
underneath. Tilt one end up and pull out.
1
2
3. Raise front of crisper frame free of refrigerator cabinet
rail assembly and pull out of unit.
3
4. Replace crispers and shelf by performing steps 2
through 3 in reverse order.
5. Slide crisper glass into place.
Chiller FreshTM System (some models)
The Chiller FreshTM System features a drawer inside a
sleeve. Freezer air circulates between drawer and sleeve.
This systems keeps food fresh longer and up to 5°F (3°C)
colder than refrigerator temperature.
Adjustable Deli Drawer™ (some models)
• Refer to instructions entitled Spillsaver ™ Shelves for
removingandreplacingshelf.
• Remove drawer and sleeve by lifting and pulling out.
• Replacedrawer by sliding intoplace.
Garden Fresh™ Crispers
Garden Fresh ™ crispers keep produce fresh longer. Wrap
produce tightly. Do not wash produce before placing in
crispers. Excess moisture could cause produce to spoil
prematurely. Do not line crispers with paper towels. Paper
towels retain moisture.
Garden Fresh ™ crisper control is located below front
shelf trim. Control adjusts humidity in crisper drawers.
Slide control to high for produce with leaves such as
lettuce,spinach or cabbage. Slide control to low for
produce with skins such as cauliflower, corn or tomatoes.
To remove or clean crisper drawer assembly for 33"
wide units:
1. Remove crisper drawer on handle side of unit.
CAUTION
!
Handle tempered glass shelves carefully to avoid
personal injury or property damage. Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
2. Remove glass crisper top by gently pushing up from
underneath. Tilt one end up and pull out.
2
1
3. Lift front of crisper shelf frame and remove.
4. Lift front of remaining crisper assembly and remove
support post from center of refrigerator floor.
3
4
5. To avoid interference with door, move remaining
crisper assembly to opposite wall and remove.
5

14
D
A
2
C
B
A
1
C
B
D
E
E
F
FG
G
Chiller FreshTM control (A) is located below front shelf trim.
Control adjusts amount of air circulating around drawer.
Slide control to
COLD for normal refrigerator temperature
and to
COLDER for colder temperature. Ice crystals may
form on drawer or food on
COLDER setting. Cold air
entering the Chiller FreshTM drawer can decrease
refrigerator temperature. Fresh food control may need to
be adjusted to a lower number to compensate for colder
air.
Chiller FreshTM drawer can be moved from the left to the
right side of the refrigerator compartment to accomodate
different storage needs.
To install on left side, see Figure 1. To install on right
side, see Figure 2
1. Remove drawer
(B) by lifting and pulling out. Remove
shelf
(C) by lifting from front, releasing hooks from
metal track
(D) , then pulling out.
2. Remove plastic cap
(E) from back wall of fresh food
section by placing a knife covered with masking tape
underneath cap and pulling forward.
3. Rotate boot
(F) 180° to opposite side.
4. Insert plastic cap in hole
(G) opposite side of fresh
food section. Confirm cap is snugly in place. Cold air
may cause food to freeze if cap is not replaced.
5. Replace shelf by inserting hooks into metal track and
lowering the front. Use slots 4 though 6 only.
6. Replace drawer by sliding in. Make sure boot fits
snugly over air inlet in back wall.
Storage Rack (some models)
Storagerack (A) providesconvenient storage for a large
bottle, eggs, etc.
• Hang rack by hooking over side of shelf.
A
Covered Storage Bucket (some models)
The covered storage bucket has a lid and removable egg
tray.When tray is removed, bucket will accept standard
egg carton, ice, etc.
Dairy Center (some models)
The dairy center provides convenient storage for butter,
cheese, etc.
• Removedairycenter by lifting door (A) ,pushing
tabs (B) of shelf down on both sides, and pulling out.
• Replace dairy center by sliding in until tabs lock
intoplace,thenlower door.
A
B

15
Door Buckets
Door buckets adjust to meet individual storage needs.
• Removedoor buckets bypushing tabs (A) on both
sides of shelves toward center and pulling bucket
out.
• Replace door buckets by sliding in until tabs lock
intoplace.
A
Tall Package Retainer (some models)
Tallpackageretainer (A) keepstallitems secure.Retainer
fits on front edge of any refrigerator door bucket or door
shelf.
A
Door Shelves
• Remove door shelves by lifting ends and pulling
out.
• Replace door shelves by placing shelf on glides (A)
andslidingdown.
A
Adjustable Divider (some models)
Adjustable divider keeps items in place and adjusts to
meet individual storage needs. Divider fits in any door
bucket or door shelf.
Bottle Holder (some models)
Bottle holder keeps items in place and adjusts to meet
individual storage needs. Bottle holder fits in any door
bucket or door shelf.

16
CAUTION
!
Make sure shelf is secure before placing items on
shelf to avoid property damage.
Freezer Features
Frost-Free System
The fresh food and freezer sections are completely frost-
free. Defrosting is automatic under normal conditions.
Automatic Ice Maker (some models)
• Make sure ice bucket is in place and ice maker arm (B)
isdown (C) .
B
A
C
• After freezer section reaches normal temperature, the
ice maker fills with water and begins operating. For
optimum ice production, it is recommended that freezer
section be at least half full. Allow 24–48 hours after
installation before first harvest of ice. Ice maker
produces 7 to 9 harvests of ice in a 24-hour period
under ideal conditions.
• After ice is formed, ice maker drops ice cubes into ice
storage bucket. During ice production, ice maker arm
(B)
raises and lowers. When ice storage bucket is full, ice
maker arm turns ice maker off
(A) .
Note: Discard first 3 harvests of ice so any impurities left
in the water line after installation are not consumed.
• If you wish to stop automatic ice production lift ice
maker arm
(A) . A definite click is heard when proper
position is reached. Ice maker arm will remain in that
position until pushed down.
Ice Service Rack (some models)
Install ice service rack (A) by placing ice service rack on
washers
(B) and sliding down.
A
B
Slideout Shelf (some models)
Slide out shelf pulls forward for easy access to items in
back.
• Remove slideout shelf by sliding forward until ball
point
(B) beneath center rail (A) catches in molding
groove.
• Grasp shelf by center rail, pull up, and remove.
• Slide in until ball point falls into molding groove.
A
B
Vertical Shelf Divider (some models)
Install vertical shelf divider by completing the following
steps:
1. Slide prongs of shelf divider beneath desired grill
work, slightly off-center from center rail.
2. Press top of divider down and slide hook assembly
beneath center rail.
12
FixedWire Shelf (some models)
• Remove wire shelf by pulling out. A sharp tug may
be necessary.
• Replace wire shelf by sliding in until back locks in
place.

17
Wire Basket
Wire basket (A) slides out for easy access to items in
back.
• Remove wire basket by lifting and pulling out.
• Replace wire basket by sliding in.
A
Ice Bin (some models)
Ice bin (A) sits below the ice service rack on the wire
freezershelf.
A
Vertical Basket Divider
Install vertical basket divider (A) by completing the
following steps:
1. Align clips on side of divider with rungs in basket
wall.
2. Press top of divider down until divider meets bottom
of basket
To remove divider:
1. Grasp top of divider and pull straight up.
A
Tilt-Out Bin (some models)
The tilt-out bin (A) provides convenient storage for frozen
food items in freezer door and tilts forward for easy
access of those items.
A
Pullout Drawer Baskets (some models)
(Door assembly of drawer removed from illustration for
visual clarity)
To remove and replace top basket:
• Remove basket by pulling basket out to its full
extension and lift out.
• Replace basket by sliding into upper compartment of
freezer.
To remove and replace bottom basket:
• Remove basket by lifting basket from rail guides.
• Replace basket by placing into rail guides.
Ice Shield (some models)
The ice shield is mounted at the back of the pullout
drawer to prevent ice from falling behind the basket
assemblies.
To remove and replace ice shield:
• Slide ice shield to the right to release hooks
(A) from
vertical wire rungs.
• To replace, slide tab
(B) into place as shown.
A
B

18
Door Gaskets
1. Clean door gaskets every 3 months according to
GeneralCleaninginstructions. Clean any spills
immediately.
Condenser Coil
Clean condenser coil behind toe grille every 3 months to
ensuremaximumperformanceofrefrigerator.
Accumulated dust and lint may cause the following:
• reducedcooling performance
• increasedenergy usage
• prematurepart failure
1. Removetoe grille by holdingends andpulling away
fromrefrigerator.
2. Clean front surface of condenser coil with a vacuum
cleanerhosenozzle.
3. Replace toe grille by inserting clips in holes and
snappingin.See LevelingRefrigerator section.
4. Raise stabilizing legs (some models) by turning
counterclockwise.
CAUTION
!
Protect soft vinyl or other flooring with cardboard, rugs
or other protective material to avoid property damage.
5. Pullrefrigerator away from wall.Run avacuum
brush across grille on backofrefrigerator.
Glass Shelves
CAUTION
!
Handle tempered glass shelves carefully to avoid
personalinjury or property damage.Shelvesmay
break suddenly if nicked, scratched, or exposed to
suddentemperature change.
Remove shelf by lifting front, releasing hooks from metal
track then pulling out. Place shelf on a towel. Allow shelf
toadjust to room temperaturebefore cleaning.
Clean crevices by completing the following:
1. Dilute mild detergent and brush solution into crevices
using a plastic bristle brush. Let sit for 5 minutes.
2. Spray warm water into crevices using faucet spray
attachment.
3. Dry shelf thoroughly and replace shelf by inserting
hooks into metal track and lowering it from the front.
Odor Removal
1. Remove all foodanddisconnect powerto refrigerator.
2. Clean all interior surfaces including ceiling, floor, and
wallsaccordingto General Cleaning instructions
above.Pay special attention to corners, crevices, and
grooves.Include all drawers, shelves,andgaskets.
3. Connectpowertorefrigeratorand return food to
refrigerator.Washanddryall containers.Wrap foods
in tightly sealed containers to prevent further odor.
Care and Cleaning
WARNING
!
Disconnectpowertorefrigerator before cleaning to
avoid electrical shock which can cause severe
personalinjury or death.After cleaning, restorepower.
CAUTION
!
Readand follow all manufacturer’scleaning directions
toavoid personal injuryor propertydamage.
General
See section on Stainless Steel Cleaning if doors are
stainlesssteel.
1. Wash surfaces with 4 tablespoons baking soda
dissolved in 1 quart warm water and a soft, clean
cloth.
2. Rinse surfaces with warm water.Dry surfaces with a
soft, clean cloth.
• Do not use the following items:
- abrasiveorharsh cleaners, ammonia,
chlorine bleach, etc.
- concentrateddetergentsor solvents
- metalscouringpads
These items can scratch, crack and discolor
surfaces.
• Do not place buckets, shelves, etc. in dishwasher.
Stainless Steel Cleaning
Damage to stainless steel finish due to improper use
of cleaning products, or using non-recommended
cleaining products,is not covered under warranty.
ForAmanarecommendedproducts, call our Consumer
Affairs division at 1(800) 843-0304, or contact us on the
internetat www.amana.com.
1. Wash surfaces with warm soapy water and a soft,
clean cloth or sponge.
2. Rinse surfaces with warm water.Dry surfaces with a
soft, clean cloth.
• Do not use the following harsh cleaners:
- abrasiveoracidiccleaners(ammonia, chlorine
bleach,vinegar-basedproduct,etc.
- citrus-basedcleaners
- scouring pads(metal, textured plastic, etc.)
These items can scratch, discolor, or permanently
tarnish surfaces.
3. Follow up rinsing by immediately drying with a soft,
clean cloth. This will avoid water spotting on
stainless steel finish.
Adhesives
1. Removeadhesiveresiduefrom refrigerator surfaces
by rubbing toothpaste into adhesive with fingers until
adhesiveloosens.
2. Rinse surface with warm water.Dry surface with a
soft, clean cloth.

19
After 24 hours, check if odor has been eliminated.
Complete steps 4–9 if odor has not been eliminated.
4. With unit unplugged, place crispers on top shelf of
refrigerator section.Packrefrigerator andfreezer
sections, including doors, with crumpled sheets of
newspaper.
5. Placecharcoalbriquettesrandomlythroughout
newspaper.
6. Closedoorsand let stand 24–48hours.
7. Removecharcoal briquettes and newspapers.
8. Completesteps2–3.
If odor is still not eliminated, contact a customer service
representativewith the number locatedin theModel
Identification section.
Light Bulb Replacement
WARNING
!
Disconnectpowertorefrigeratorbefore replacing light
bulb to avoid electrical shock which can cause severe
personalinjury ordeath.After replacinglight bulb,
restorepower.
CAUTION
!
Observethe following toavoid personalinjuryor
propertydamage.
• Allow light bulbs to cool
• Wear gloveswhen replacing light bulb.
Fresh Food Light
• Remove light bulb cover (B) by removing ¼" hex nut
screws (A) .Replacewithappliancebulbno greater
than 60 watts.
• Replace light bulb cover by replacing ¼" hex nut
screws.
A
B
Vacation Tips
Complete the following steps for short vacations.
1. Removeperishable foods.
2. If an ice maker is installed, move ice maker arm to
Off position. (See “Automatic Ice Maker” section page
12)
Complete the following steps for long vacations.
1. Emptyrefrigerator and freezer sections.
2. Unplugrefrigerator.
3. Cleanrefrigeratoranddoor gaskets according to
GeneralCleaning instructions in “Care and Cleaning”
section.
4. Prop doors open, so air can circulate inside.
5. If an ice maker is installed, turn off water supply to
refrigerator and move ice maker arm to Off
position.(See “Automatic Ice Maker”sectionpage 12)
Energy Tips
This refrigerator is designed to be one of the most energy
efficientrefrigeratorsavailable. Reduce energy use by
observingthefollowing.
• Operateinnormal household temperatures of 55°to
110°F(13° to 43°C) awayfromheat sources and direct
sunlight.
• Setrefrigerator,freezer, and temperaturecontrolled
meat drawer system controls no colder than necessary.
• Keepfreezersection full.
• Keep door gaskets clean and pliable.Replace gaskets
ifworn.
• Keepcondenser coils clean.
Freezer Light
• Remove light bulb cover (B) by removing ¼" hex nut
screws (A) .Replacewithappliancebulbno greater
than 60 watts.
• Replace light bulb cover by replacing ¼" hex nut
screws.
B
A

20
Normal Operating Sounds
Thisnew refrigerator may bereplacing adifferently
designed,less efficient or smallerrefrigerator.Today’s
refrigeratorshavenewfeaturesand are more energy
efficient.As a result, certain sounds may be unfamiliar.
Thesesounds are normal andwill soonbecome familiar
to you.They also indicate refrigerator is operating and
performingasdesigned.
1. Freezer control clicks when starting or stopping
compressor.
2. Freezer fan airrushes and whirs.
3. Sealed system (evaporator andheatexchanger)
refrigerantflow gurgles, pops orsounds likeboiling
water.
4. Defrost heater sizzles, hisses or pops.
5. Defrost timer sounds like an electric clock and
snaps in and out of defrost cycle.
6. Condenser fan airrushes and whirs.
7. Compressor hasa high pitched humorpulsating
sound and cycles on and off.
8. Ice cubes from ice maker (some models) drop into
ice bucket.
9. Ice maker water valve hookup (somemodels)
buzzes when ice maker fills with water.This occurs
whetherornot refrigerator is connectedto water
supply.If refrigerator is not connected to water
supply, stop sound by raising ice maker arm to Off
position. Ice maker water valve hookup is located
behindcondenser fanin back of refrigerator.
Note: Foam insulation is very energy efficient and
has excellent insulating capabilities.However, foam
insulation is not as sound absorbent as
previouslyused fiberglass insulation.
8
7
6
5
4
3
2
1